CSB-802 Resetable Call Point Installation Guide
- September 6, 2024
- CSB
Table of Contents
CSB-802 Resetable Call Point
“`html
Specifications
-
Model: CSB-802
-
Power: DC 12-24V
-
Working Current: DC
12V/30mA(Standby)/100mA(trigger), DC
24V/30mA(Standby)/100mA(trigger) -
Buzzer: Set to silent or buzzer
continuously -
Indicator Light: Default Green, Active Red;
Light can be set as continuous flashing or keep lighting -
Output Weight: 3NO/3NC/3COM, DC12V/0.5A,
200g -
Size: 91mm96mm34.5mm (with cover)
-
Material: ABS, PC (Cover parts)
Product Usage Instructions
Installation
-
Step 1: Fixed the back box on the wall.
-
Step 2: Take off the back box with the reset
tool during installation. Insert the reset pole about 1CM at the
front hole and pry up to open the front case. -
Step 3: Put the protection cover onto the
front case and connect the wire correctly. -
Step 4: Fasten the front cover with the back
box. Press the transparent plate. -
Step 5: Fasten the front case on the back box.
Before fastening the front case, test the function by pressing the
pressing plate. The buzzer will sound or be silent, and the LED
will change color. The LED will keep lighting or flashing based on
your jump cap position.
Reset Tool Usage
To reset the alarm, follow these steps:
- Locate the reset slot on the device.
- Insert the reset tool into the slot.
- Drop down to remove the alarm.
Frequently Asked Questions
Q: Can the housing color be customized?
A: Yes, the housing is available in a variety of colors to suit
different preferences.
Q: How can I change the buzzer status?
A: The buzzer status can be set as either silent or continuous
wailing using the provided reset tool.
Q: What is the power range for this product?
A: The input power range is DC 12-24V, matching various types of
fire alarm system requirements.
“`
Resetable Call Point Installation Manual
Features
Optional Design
1. The housing is available in a variety of colors. 2. Press the pressing
plate to enable the contact output function. 3. Resettable design, with a
large number of obvious indicators around. 4. Pressing plate is with status
shown. 5. With special reset tool, compact appearance, easy to
carry and collection. 6. Built-in buzzer status could be set as silent and
continuous wailing. 7. Warning light status could be set as continuous
flashing and
keeping light. 8. Input power range is DC 12-24V, matching the various types
of fire
alarm system’s request. 9. Surface mount without screws and with protect
cover.
(CSB-802)
Specification
Mode Item
CSB-802
Power
DC12-24V
Working current
DC 12V/30mA(Standby)/100mA(trigger) DC 24/30mA(Standby)/100mA(trigger)
Buzzer
Set to silent or buzzer continuously
Indicator light
Default Green, Active Red; Light can be set as continuous flashing or keep lighting
Output Weight
3NO/3NC/3COM, DC12V/0.5A 200g
Size Material
91mm96mm34.5mm (with cover) ABS,PC. (Cover parts)
Remark
±10% ±10%
Standby
Display status: green
NC NO COM
Action
Display status: red
NC NO COM
Wiring Instruction
Buzzer Muted Buzzer LED
Lighting Flashing
COM NO NC
COM NO NC
COM NO NC GND VCC
Installation
Call Point
COM NO NC COM NO NC COM NO NC GND VCC
Fire alarm system
1 2 3
DC12-24V Power
Installation
Installation steps
Complated
1
Step 1
Step 2
2
Installation size
60.0 52.0 40.0
Fixed the back box on the wall.
4
During installation, Take off the back box with the reset tool. Insert the
reset pole about 1CM at front hole and pry up to open the front case.
3
Put the protection cover onto the front case and connect the wire correctly.
5
Fasten the front cover with back box
Press transparent plate
Fasten the front case on the back box. (Remark: before fasten the front case,
you could test the function first. You could press the pressing plate and the
buzzer will sound or silent and LED will change the color. LED will keep
lighting or flashing base on your jump cap position)
Reset tool
Reset slot
Insert the pole and drop down to remove the alarm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>