CHAOYANG JST-BT035 Bluetooth Headset User Guide
- September 6, 2024
- CHAOYANG
Table of Contents
CHAOYANG JST-BT035 Bluetooth Headset
Product Information
Specifications:
- Model: JST-BT035
- Components: Headset body, TYPE-C charge cable, User Guide, Dual 3.5mm audio jack cable
- Charging: TYPE-C Charging port
- Audio Input: 3.5MM audio cable port
- Indicator: Light Indicator (Red light on – charging, Red light off – fully charged)
Product Usage Instructions
Charging the Headset:
The internal rechargeable battery must be fully charged before using the headset. Connect one end of the TYPE-C cable to the charger or USB interface of a computer, and the other end to the charge interface of the headset. The red light indicates charging, and it turns off when fully charged.
Controls:
- Play Music: Short press for next song, long press to increase volume.
- Call Functions: Click Play/Pause for calls, answer/hang up, and automatic station search. Double click to call back, long press to reject a call.
- Light Board: Three strokes to turn on/off the light board.
- Switch Modes: Press both buttons simultaneously to switch modes.
- Power: Flip the switch to ON position to start and OFF to shut down.
FAQ
- Q: How do I know if the headset is fully charged?
- A: The red light indicator will turn off when the headset is fully charged.
- Q: How do I switch between different modes?
- A: Press both buttons simultaneously to switch between modes.
- Q: What is the purpose of the 3.5mm audio cable port?
- A: The port is for connecting external audio devices using a 3.5mm audio cable.
Check the Items
- Headset body
- TYPE-C charge cable
- User Guide
- Dual 3.5mm audio jack cable
Product Specification
- Effective distance: 10m
- Working hours of the headset:
- About 10 hours
- Charge time of the headset:
- About 2.0hours
- Charging input voltage: 3.7V—-5V DC
- Bluetooth frequency 2.402-2.480GHz
*Note: Due to different pairing devices and using environments, the working hours of the headset are different.
- Short press a song, long press to increase the volume;
- Click Play/Pause, answer/hang up the call, and search the station automatically; Double click to call back; Long press to reject the call; Three strokes to turn on and off the light board;
- Short press the previous song, long press the volume to reduce; Press D and 3 at the same time to switch modes;
- Flip the switch to the ON position to start; Flip the switch to the OFF position to shut down
- TYPE-C Charging port
- 3.5MM audio cable port
- Indicator light
- TF card
Bluetooth Pairing Operation Method
Pull on / off to start the machine and enter bluetooth pairing model. At this time search the corresponding Bluetooth device name JsT-BT035 on the phone, click the device name JST-BT035 on the mobile phone for the bluetooth pairing.
Charge the Headset
The internal rechargeable battery inside must be fully charged before you start to use the headset. Connect one end of the TYPE-C cable to the charger or the USB interface of the computer, and the other end to the charging interface of the headset. Red light on: charging. Red light off: charged fully.
Dos and Don’ts
- Keep the product dry. Do not store it in damp areas.
- Do not expose the product to the sun or high temperature.
- Do not attempt to open the product, especially operated by a non-professional person.
- Do not make the product fall down, shake the product violently, or strike the product with hard objects.
- Do not use harsh chemicals or cleaners to clean the headset.
- Do not use something sharp to scratch the surface of the product.
- Do not continuously charge the headset for over 10 hours to avoid affecting the service life.
Warning:
To prevent possible hearing damage, do not listen at high volume levels for long periods.
FCC Statement
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
. Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>