TYPE S S403 4K 60FPS Dashcam User Manual
- June 13, 2024
- TYPE S
Table of Contents
- INTRODUCTION
- PACKAGE CONTENTS
- PRODUCT SPECIFICATIONS
- PRODUCT DIMENSION
- PRODUCT OVERVIEW
- BUTTON CONFIGURATION
- INSTALLATION
- INITIAL SETUP
- MENU SETTINGS
- CAMERA STATUS & LED INDICATORS
- RECORDING TIME
- TIME-LAPSE RECORDING LOGIC
- TECHNICAL SPECIFICATIONS
- DOWNLOADING AND USE THE TYPE S DRIVE APP
- APP SETUP
- APP SETTINGS
- SAFETY INFORMATION
- MAINTENANCE & WARRANTY
- GENERAL INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
S403
4K 60FPS Dashcam
WP ITM. BT533206
Care & Use Instructions Important, retain for future reference:
Read carefully
INTRODUCTION
Please read all of the installation instructions carefully before installing
the product. Improper installation will void the manufacturer’s warranty. The
installation instructions do not apply to all types of vehicles, and are
written as guidelines to assist in installing the product.
Consult an experienced technician if you are not comfortable installing the
product. You can also contact TYPE S at 866.294.9244 to speak to one of our
installation specialists if you have any specific questions regarding this
product.
BEFORE using the Dashcam, please read the safety information provided in this
user manual.
ALWAYS use the product as outlined in this user manual.
Please make sure to read and understand all local laws and regulations
regarding cameras and their use in a vehicle. Laws vary by state.
PACKAGE CONTENTS
- 1 x 4K 60FPS Dashcam
- 1 x 12 / 24V Power Adapter
- 1 x Windshield Mount with
- M VHB™ Double Sided Tape
- 1 x 3M VHB™ Double Sided Tape (Spare)
- 1 x 32GB MicroSD Card
- 1 x Static Sticker
- 1 x Instruction Manual
- 1 x Warranty Card
PRODUCT SPECIFICATIONS
Screen: | 2.4″ IPS |
---|---|
Resolution: | 4K UHD – Ultra High Definition (3840 x 2160p) / 60FPS |
Frequency: | 2.4 GHz |
Operating Voltage: | DC 12 / 24V – Cigarette Lighter Adapter (CLA) |
Operating Temperature: | 140F~1400F (-100C~600C) |
Viewing Angle: | 136° (optical diagonal field of view) |
Image Sensor: | 8MP |
Maximum Signal Range: | 9.84 Feet/3 Meters (without interference or |
obstruction)
PRODUCT DIMENSION
PRODUCT OVERVIEW
- Mounting Socket
- Front Status Indicator
- Speaker
- Display Screen
- Rear Camera AV-IN Port
- Microphone
- Camera Lens
- MicroSD Card Slot
- USB-C Power Input
- Power Button
- Function Buttons
- Back Status Indicator
- Reset Button
BUTTON CONFIGURATION
Apply configuration and settings to the Dashcam using the 3 function buttons. Please refer to the section below for the functions of each button under different modes.
– Switch between Front/Rear/PIP view (press and hold for 3 sec)
– Snapshot/Burst Photo (click once)
Open Menu (click once)
Return to Video Mode (click once)
– Switch between Front/Rear/PIP view (press and hold for 3 sec)
– Lock/Unlock Video (click once)
Microphone On/Off (click once)
Record (click once)
NOTE: Rear and PIP (picture-in-picture) views only available when the
1080P Rear Camera (sold separately) is connected.
INSTALLATION
- Peel off the protective film from the display screen.
- Insert the MicroSD card into the slot if not pre-installed.
- Attach the Dashcam to the Windshield Mount using the socket on the top.
- Plug the USB-C power cable into the input port on the Windshield Mount.
- Plug the 1080P Rear Camera power cable into the AV-IN port.
-
1080P Rear Camera (BT532838) sold separately. 6. Attach the Dashcam onto the windshield:
– Apply the static sticker onto the cleaned windshield and peel off the protective film.
– Peel off the 3M VHB™ tape backer from the mount and attach the dashcam onto the static sticker. WARNING: When installing, please ensure that it won’t obstruct the driver’s field of vision.- Route the power cable to your 12 / 24V outlet (cigarette lighter) and hide the cable in the headliner and pillars. We recommend going through the passenger side so the cable doesn’t get into the driver’s way.
INITIAL SETUP
Set date & time. The date stamps that appear on all future recordings will follow this setting.
MENU SETTINGS
Apply configuration and settings to the Dashcam using the 3 function buttons.
Video Mode
- The Dashcam will start recording automatically upon being connected to power.
- If you have connected an add-on 1080P Rear Camera (BT532838, sold separately), the display will default to picture-in-picture view.
- Press and hold to switch between front, rear and picture-in-picture view.
- Recording must be stopped manually to switch between modes. Click to stop recording.
Camera Mode
- Click to open menu, then click to select Camera Mode.
- Click to take a photo, or press and hold to switch between views.
- Click to return to Video Mode.
Gallery Mode
- Click and select Gallery Mode in menu.
- Utilize and to cycle through Event, Video and Photo folders.
- Click to enter the selected folder.
- In each folder, you can select between browsing front and rear camera footages or photos if you have the add-on 1080P Rear Camera (BT532838) connected.
Play Back and Manage Files
- Click or to cycle through the previews.
- Click to open the selected video file or enlarge the selected photo into full screen.
- During video playback, click **** to pause and click again to resume the video.
- Click ****to adjust video speed to X2 or X4.
- Click to return to the previews for next video.
Erase Files
- In previews, press and hold to delete the selected file or all files in the current folder.
- Click to confirm the erase.
- Press and hold to return to folder selection.
Video Setting
Resolution
- Switch between five recording resolutions. Higher frame rates (FPS) provide smoother footage. 4K (3840 x 2160P) (60FPS), 4K (3840 x 2160P) (30FPS), 2K (2560 x 1440P) (60FPS), 2K (2560 x 1440P) (30FPS) and 1080P (1920 x 1080P) (60FPS).
- When the add-on 1080P Rear Camera (BT532838) is connected, you may only switch between 4K+1080P and 2K+1080P resolutions, and the frame rate will be fixed at 30 FPS.
NOTE: The video resolution of normal recording cannot be adjusted when
Slow Motion is in use.
Flip Vertical
- Select to invert the rear camera image upside down.
Flip Horizontal
- Select to invert the rear camera image left to right.
NOTE: Flip Vertical and Horizonal are only available when the add-on
1080P Rear Camera (BT532838) is connected.
Exposure
- Adjust the exposure level between +2.0, +1.0, 0, -1.0 and -2.0 for different lighting conditions.
G-Sensor
-
Adjust the G-Sensor sensitivity between Off, High, Mid and Low.
-
When the G-Sensor detects a sudden impact such as a collision, it’ll automatically “lock” the footage and move it into the Event folder so that it doesn’t get overwritten by the loop record feature.
Motion Detection -
Motion Detection On/Off. The Motion Detection function allows the Dashcam to start recording automatically when a moving object is detected. Please only use this function when the car is parked.
NOTE: Motion Detection does not support Slow Motion or Time Lapse Mode.
Parking Monitor -
Parking Monitor On/Off.
-
The Parking Monitor function allows the Dashcam to record videos when an impact is detected while the vehicle’s engine is off. The Dashcam will power on automatically and record a 20-second video clip then shut down.
NOTE: Feature only available when the Dashcam is hardwired to the fuse
panel. Hardwiring kit (AC533513) sold separately.
Loop Record
- Select the duration of each recorded footage between 1 minute, 3 minutes and 5 minutes. Oldest and unlocked files will be overwritten once the storage limit is reached.
Time Lapse
- Select between normal and time lapse video.
- Time lapse videos are recorded at a lower frame rate to create an accelerated time effect during playback. (Refer to page 19)
NOTE: Please set Slow Motion to OFF to activate the Time Lapse function.
Slow Motion
- Switch between 2K 60FPS and 1080P 60FPS resolution for slow motion recording. Select OFF to disable the Slow Motion function.
- In Slow Motion Mode, the Dashcam records videos at a higher frame rate to slow down footages to 2x the normal speed during playback.
NOTE: Slow Motion setting can only be accessed through single camera mode, and is altered independently of normal recording. Please set Time Lapse to OFF to activate the Slow Motion function.
Camera Setting
Resolution
-
Select camera recording resolution between 12M (4608 x 2592), 8M (3840 x 2160) and 5M (3072 x 1728).
Burst Photo -
Burst Photo On/Off.
-
Burst Photo Mode allows you to capture a series of photos in quick succession.
System Setting
Screen Save
-
Select the time of inactivity between Off, 1 minute, 3 minutes and 5 minutes. Screen will dim to a digital clock interface after the specified time of inactivity you select. To turn on the
display, click any of the function buttons.
Date & Time -
Update the date & time shown on the Dashcam and on all its recorded media files.
Digital Clock -
Digital Clock (during screen save mode) On/Off. The digital clock and date will be shown on the screensaver when you set this as ON. Otherwise, the screen will be turned off.
Plate Number
-
When you have entered your license plate number and set this to ON, your plate number will show on all recorded media files alongside the date and TYPE S logo stamp.
Speed Unit -
Select the unit of speed between KM/H and MPH. Default speed unit is set as MPH.
WiFi Setting -
The auto sync function enables you to view and manage files on your smart device using the TYPE S Drive App.
NOTE: Refer to page 21 for pairing procedure.
Language
-
Default language of the Dashcam is English.
Format -
Erase all data on the MicroSD card.
Default Setting -
Reset all settings to factory defaults.
Device Info
-
Show the Dashcam’s current firmware version.
Regulatory Info -
Show regulation related information.
Media Setting
Keypad Tone
-
Select to mute or unmute the keypad tone.
Video Volume -
Select the video volume of each recorded footage between Low, Mid and High.
Startup Sound -
Startup Sound On/Off. When you set this as ON, the Dashcam will play a tone upon being powered on.
Anti Flicker -
Adjust anti-flickering setting between 50Hz and 60Hz.
Date and TYPE S Logo Stamp -
Date and TYPE S Logo Stamp On/Off. When you set this as ON, the date and TYPE S logo stamp will show on all recorded media files.
CAMERA STATUS & LED INDICATORS
Power / Mode Status | LED Indicators |
---|
Power On
Dashcam powers ON when the engine is turned on.
To manually power ON, clickonce on the power button.| Solid blue LED light on
front and back when Dashcam is powering on.
Recording| Blue LED light on front and back blinking.
Recording Stopped| Solid blue LED light on front and back.
RECORDING TIME
Memory Card Capacity | Total Recording Time (Approx.) |
---|---|
Normal Recording | Slow Motion |
4K
60FPS| 4K
30FPS| 2K
60FPS| 2K
30FPS| 1080P
60FPS| 4K+
1080P
30FPS| 2K+
1080P
30FPS| 2K
60FPS| 1080P
60FPS
32GB| 80 mins| 95 mins| 177 mins| 177 mins| 260 mins| 73 mins| 114 mins|
190 mins| 330 mins
64GB| 180 mins| 210 mins| 399 mins| 399 mins| 580 mins| 164 mins| 254
mins| 160 mins| 290 mins
128GB| 350 mins| 410 mins| 760 mins| 760 mins| 1120 mins| 316 mins| 490
mins| 300 mins| 550 mins
Note: If you use your own MicroSD card please insert it into the Dashcam and format it before first use.
TIME-LAPSE RECORDING LOGIC
Mode | Behavior |
---|---|
Off | Without time-lapse record, captures 60 frames / 30 frames per 1 |
second.
1 Second| Time-lapse record, captures 1 frame per 1 second.
3 Seconds| Time-lapse record, captures 1 frame per 3 seconds.
5 Seconds| Time-lapse record, captures 1 frame per 5 seconds.
TECHNICAL SPECIFICATIONS
Memory Management
| Video Mode| Resolution| 1-Minute Video Size| Loop Period
(32GB SD Card)
---|---|---|---|---
Normal Recording
| 4K 60FPS| 3840 x 2160| 300MB| 24893 / 300 = 83 mins
4K 30FPS| 3840 x 2160| 260MB| 24893 / 260 = 95 mins
2K 60FPS| 2560 x 1440| 140MB| 24893 / 140 = 177 mins
2K 30FPS| 2560 x 1440| 140MB| 24893 / 140 = 177 mins
1080P 60FPS| 1920 x 1080| 95MB| 24893 / 95 = 260 mins
4K + 1080P 30FPS| 3840 X 2160 + 1920 X 1080| 340MB| 24893 / 340 = 73 mins
2K + 1080P 30FPS| 2560 X 1440 + 1920 X 1080| 220MB| 24893 / 220 = 114 mins
Slow Motion| 2K 60FPS| 2560 x 1440| 130MB| 24893 / 130 = 190 mins
1080P 60FPS| 1920 x 1080| 75MB| 24893 / 75 = 330 mins
Memory Card Capacity| Usable Space| System Reserve|
Event & Video| Photo
---|---|---|---|---
32GB| 29.11GB| 0.9GB| 24.31GB| 3.9GB
64GB| 59.44GB| 0.9GB| 54.64GB| 3.9GB
128GB| 110GB| 0.9GB| 105.2GB| 3.9GB
NOTE: Due to technological limitations, the functions Time Lapse, Slow Motion, and Motion Detection cannot work at the same time. Please only use one at a time.
DOWNLOADING AND USE THE TYPE S DRIVE APP
The Dashcam’s auto sync function enables you to control and playback recorded media files using your smartphone with the TYPE S Drive App. Scan below QR code or search “TYPE S Drive” in the App Store or Google Play. Download and install the App.
SSID:
TYPE_S_DVR12_4K_xxxxxx Password: 12345678
https://itunes.apple.com/hk/app/type-s-backup-camera/id1363886509?mt=8
Compatible with iPhone 4s and higher, iPad3, iPad Mini, iPad Air and higher, and iPod touch 5th Generation and higher. Requires iOS 9.0 or higher.
https://play.google.com/store/apps/details?id=com.axiacomm.TypeS
ompatible with phones with Android™ 5.0 or higher.
Once installed, open the App and begin enjoying your TYPE S Drive App.
NOTE: The App is only available on smartphones with Apple iOS 9 or newer,
and Android 5.0 or newer. The TYPE S Drive App is not accessible from tablets,
browsers, or PCs.
APP SETUP
Auto sync with the Dashcam
-
Open the Dashcam’s menu and navigate to System Setting.
-
Go to WiFi Setting and turn it on.
NOTE: WiFi is ON by default.
Android Device
-
Navigate to the WiFi setting page on your device.
-
Connect to “TYPES DVR12_4K_xxxxxx” with the default password “12345678”.
-
Run the TYPE S Drive App. Click Allow in the pop-up message when prompted to allow the App to access your location.
-
Select the Dash Camera category.
-
Scroll down the device list and select S403 DASH CAM. Click Set Up Device.
-
You should see the live view of Dashcam on the main interface if the connection is successful.
NOTE: After the initial sync, the App remembers your Dashcam’s network so that you can simply click Connect to rejoin next time.
iOS Device (Follow Steps 1 – 2 from previous instructions)
3. Please make sure Bluetooth, Location Services and Local Network Access are
enabled on your device.
4. Run the TYPE S Drive App and select the Dash Camera category.
5. Scroll down the device list and select S403 DASH CAM. Click Set Up Device.
6. Click Join in the pop-up message if prompted to connect to the Dashcam’s
WiFi network. OR Click to go to App permissions setting page.
7.
Click Settings on the App permissions setting page.
8. Scroll to the top and click to enter the WiFi setting page.
9. Connect to “TYPE_S_DVR12_4K_xxxxxx” with the password “12345678”.
10. Click TYPE S Drive to return to the App.
11. Once connected, you will be able to see the Dashcam’s real-time view
through the App.
APP SETTINGS
Main Interface
Display Mode
Select from 3 different viewing modes.
NOTE: “Rear” mode and “Front + Rear” mode only available when the add-on 1080P Rear Cam (BT532838) is connected.
Change WiFi Password
Click to open Main Menu, then navigate to System Setting > Change WiFi
Password. Enter your preferred password (must be exactly 8 characters), then
click OK for changes to effect. Connect to your Dashcam’s WiFi network again
with the revised password.
NOTE: It is recommended to reset your WiFi password upon initial
connection to protect your data from unauthorized access.
Gallery
Click on the main interface to enter the media gallery. Click SD CARD to
access all media files sorted from latest to oldest in the MicroSD card.
Scroll down the list to select the file. In each file, you can browse between
front and rear camera footages and photos.
NOTE: Rear camera footages and photos only available after pairing with the 1080P Rear Camera.
SD Card
Click to download the selected file onto your smart device or to delete the
file from the MicroSD card.
GPS Information
Click to play the footage or to view embedded GPS location simultaneously
during playback.
MOBILE
Click MOBILE to access and manage the downloaded file on your smart device
even if it is disconnected from the Dashcam. Click to share or to delete the
selected file.
GPS Signal Status 1
Map tracking is not working. To process, mobile data must be turned on.
GPS Signal Status 2
GPS receiver is searching for GPS signal when the footage is recorded. GPS
trip data will resume once it picks up the signal. If this status persists,
please contact our technical support for troubleshooting.
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS– This manual contains important safety and operating instructions of 12 / 24V Car charger for Model BT533206.
- Before using the product, read all instructions and cautionary markings
- Do not expose car charger to rain, moisture, or snow.
- Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric shock, or injury to persons.
- To reduce risk of damage to cigarette lighter connector and cord, pull by cigarette lighter connector rather than cord when disconnecting car charger.
- Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
- Do not operate the car charger with a damaged cord or cigarette lighter connector – replace the damaged items with new factory replacement items immediately.
- Do not operate the car charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceperson.
- Do not disassemble the car charger; take it to a qualified serviceperson when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
- To reduce risk of electric shock, unplug the charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
WARNING: A failure to read and follow these warnings and instructions may result in a serious accident, including damaged property or a serious injury, including loss of life.
-
The Dashcam is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. However, you, the driver, must use it safely and properly. Use of the Dashcam is not a substitute for safe, proper and legal driving.
-
Never depend on the Dashcam and Rear Camera (not included) entirely when driving and backing up. The image on the screen is different from actual conditions. Objects viewed in the Dashcam display screen differ from actual distance because a wide-angle lens is used.
-
If you use Rear Camera (Not included), never back up while looking only at the screen. You should always check behind and around the vehicle when backing up just as you would if the vehicle did not have the Rear Camera. Always make sure your intended path is clear. If you back up while looking only at the monitor, you may hit a vehicle, pedestrian, bicyclist, child, pet or other object resulting in injury or death. Always back up slowly.
-
The area displayed by the Dashcam and Rear Camera (not included) is limited. The Dashcam does not display objects that are out of the Dashcam’s field of view. The Rear Camera (not included) does not display objects that are close to or below the bumper, underneath the vehicle, or objects out of the camera’s field of view. The area displayed on the screen may vary according to vehicle orientation or road conditions.
-
Be sure to check the Dashcam’s position and mounting angle before each use.
-
Do not strike the Dashcam. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock.
-
This product will only provide images of items that are within the field of view of the Dashcam.
Thus, it is imperative that the Dashcam should be kept clean and unobstructed. -
Adhere to all applicable traffic laws and motor vehicle regulations applicable to the device.
-
Consult local laws and regulations for any restrictions on installation or use.
-
Never allow children to play with the device. Small parts may be a choking hazard.
-
There is a plastic cover over the Dashcam. Do not scratch the cover when cleaning dirt or snow from the cover.
-
If the temperature changes rapidly, the system may not operate normally.
-
If you replace the tires, the area displayed on the monitor may change and you may need to adjust the camera.
-
When strong light directly enters a Dashcam, objects may not be displayed clearly.
-
The screen may flicker under fluorescent light.
-
The colors of objects on the Dashcam may differ from those of the actual objects.
-
Do not use alcohol or thinner to clean the Dashcam. This will cause discoloration. To clean the Dashcam, wipe with a clean cloth dampened with mild cleaner diluted with water and then wipe with a dry cloth.
SAFETY AROUND AND BEHIND OTHER VEHICLES
Many preventable injuries and deaths occur in driveways or parking lots when
drivers do not see children, pets, or others near their vehicles. Here are a
few safety tips that will help you to avoid a back-over accident:
- Walk completely around your vehicle before getting in. Check for kids, toys, and pets before entering the vehicle and starting the engine.
- Know where children are. Have children stand in a place where they are in full view.
- Be aware of young children. Young children are small and hard to see.
- Parents, caregivers and all adults need to be vigilant in supervising children, especially when children are in the yard, driveway or parking lot playing near parked cars.
- Roll down your window so you will be able to hear what is happening outside your vehicle.
- Owners of SUVs, trucks, and vans need to take extra care to avoid hitting or running over a child.
- Teach children to move away from a vehicle whenever it is started.
MAINTENANCE & WARRANTY
CLEANING
- If dirt, rain or snow attaches to the camera, the monitor may not clearly display objects. If water droplets, snow or mud adhere to the camera lens, rinse with water and wipe with a dry cloth.
- Do not use alcohol, benzene or thinner to clean the Dashcam. This will cause discoloration. To clean the Dashcam, wipe with a clean cloth dampened with mild cleaner diluted with water and then wipe with a dry cloth.
WARRANTY
- TYPE S
LIMITED WARRANTY
TYPE S warrants, to the original purchaser, that its products are free from defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, TYPE S liability shall be limited to that set forth in this limited express warranty. This limited express warranty shall be the exclusive remedy of the purchaser and TYPE S makes no other warranty of any kind aside from the limited express warranty stated above.
NOTE: Warranty only applies for North American customers of purchases made in North America.
CONDITIONS OF WARRANTY
If during the 1 year warranty period your new product is found to be
defective, TYPE S will repair such defect, or replace the product, without
charge for parts or labor subject to the following conditions:
- All repairs must be performed by TYPE S.
- All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
- The equipment must not have been altered or damaged through negligence, accident, improper operation, or failure to follow the product instructions for installation, use, or care.
- The replacement of parts is excluded from the warranty when replacement is necessary due to normal wear and tear.
- Repair or replacement parts supplied by TYPE S under this warranty are protected only for the unexpired portion of the original warranty.
- This is a “repair or replace” warranty only, and does not cover the costs incurred for the installation, removal or reinstallation of the product, or damage to any mobile phone device or vehicle.
OWNER’S RESPONSIBILITIES:
TYPE S will make every effort to provide warranty service within a reasonable
period of time.
SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED OR IF YOU WOULD LIKE
ASSISTANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1.866.294.9244 DURING
REGULAR BUSINESS HOURS MONDAY THROUGH FRIDAY 8:00 AM TO 5:00 PM.
NOTE: Toll Free # is for North America Customers ONLY. See Customer
service section for customer contact numbers for other regions/offices.
For customer service and technical support, please call us at 1.866.294.9244.
If at that time it is determined that a replacement unit is needed, the
support representative will issue a Return Authorization and instruct on how
to get a new unit. TYPE S makes no other warranty of any kind aside from the
limited express warranty stated herein.
DISCLAIMER OF WARRANTIES, INCLUDING WARRANTY OF MERCHANTABILITY AND WARRANTY
OF FITNESS FOR PARTICULAR PURPOSE: EXCEPT AS SPECIFICALLY SET FORTH HEREIN, NO
WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, IS MADE AS TO THE Dashcam.
EXCEPT AS EXPRESSLY SET FORTH HEREIN, TYPE S AND/OR ITS AFFILIATES EXPRESSLY
DISCLAIMS, WITHOUT LIMITATION, ANY STATUTORY WARRANTIES AND ALL IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
TYPE S and/or its affiliates do not guarantee or promise that the user of
Dashcam will not be in an accident or otherwise not collide with an object
and/or person. Our Dashcam is not intended in any way to be a substitute for
careful and cautious driving or for the consistent adherence to all applicable
traffic laws and motor vehicle safety regulations.
The Dashcam is not intended to be a substitute for rearview mirrors or for any
other motor vehicle equipment mandated by law. Even when properly installed,
our Dashcam has a limited field of vision and does not provide a comprehensive
view of the rear area of the vehicle.
TYPE S and/or its affiliates are not responsible for a user’s intended or
actual use of the Dashcam.
In no event shall TYPE S and/or its affiliates have any liability for any
losses (whether direct or indirect, in contract, tort or otherwise) incurred
in connection with the Dashcam, including but not limited to damaged property,
personal injury and/or loss of life. Neither shall TYPE S and/or its
affiliates have any liability for any decision, action or inaction taken by
any person in reliance on the Dashcam, or for any delays, inaccuracies and /or
errors in connection with the Dashcam and its functioning.
TYPE S and/or its affiliates are not responsible for a user’s intended or
actual use of the Dashcam. In no event shall TYPE S and/or its affiliates have
any liability for any losses (whether direct or indirect, in contract, tort or
otherwise) incurred in connection with the Dashcam, including but not limited
to damaged property, personal injury and/or loss of life. Neither shall TYPE S
and/or its affiliates have any liability for any decision, action or inaction
taken by any person in reliance on the Dashcam, or for any delays,
inaccuracies and /or errors in connection with the Dashcam and its
functioning.
TYPE S and/or its affiliates shall have no responsibility or liability for
damage and/or injury resulting from accidents occurring with vehicles having
the installed, and TYPE S and/or its affiliates, the manufacturer, distributor
and seller shall not be liable for any injury, loss or damage, incidental or
consequential, arising out of the use or intended use of the product.
GENERAL INFORMATION
CUSTOMER SERVICE/CONTACT
IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION, DO NOT
RETURN THE PRODUCT TO THE STORE. CONTACT TYPE S DIRECTLY FOR INSTRUCTIONS ON
HOW TO RETURN/ EXCHANGE THE PRODUCT.
FCC Compliance Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or change to this
equipment. Such modifications or change could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation.
S403
4K 60FPS Dashcam
BT533206
Responsible Party:
TYPE S
2975 Red Hill Ave., Ste. 100,
Costa Mesa, CA 92626, U.S.A.
Tel: 1-866-294-9244
Android is a trademark of Google Inc.
iPhone, iPad, Mac and iPod touch are trademarks of Apple Inc.
3M VHB™ is a trademark of 3M Company.
A Horizon Brands Company
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626, U.S.A.
1.866.294.9244 | info@typesauto.com
All rights reserved.
©2023 TYPE S.
www.typesauto.com
ML-533206E_V1′
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>