WEILIN A3 WIFI Camera User Manual

A3 WIFI Camera

“`html

Product Information

Specifications:

• Model: A3 WIFI Camera
• Max Micro SD Card Capacity: 32GB (not included)
• Wireless Connectivity: Wi-Fi
• Compatibility: Android and iOS devices

Product Usage Instructions

I. Product Description

ON/OFF: Plugged in and switched on successfully
with the indicator light on; switched off by long press of the
button or by unplugging the power supply;

MODE: Press for 6 seconds to reset the
camera;

CARD PORT: Insert Micro SD card to save
recordings (Max 32G, not included);

II. APP Settings

1. Download the app iWFCam: Scan the QR code
   provided to download the APP compatible with your phone
   system.

2. Camera-Phone Connection (AP Mode):

   • Switch on the device.

   • Tap into your phone Settings WLAN, find the camera hotspot
     signal (named with BK*** without password), then connect it.

   • If using Android phones, confirm connection when prompted.

3. Camera-APP Remote Connection (IP Mode):

   • Start APP iWFCam, the camera will automatically be added
     online.

   • Set Wifi Config in the APP by choosing the router and entering
     the router network password.

   • Wait for the camera’s update process for remote control; once
     it shows Online, you have successfully connected.

4. Camera Live-feed Page:

   • Click the camera in the APP to view live feed.
   • You can adjust settings such as Brightness, Night Vision, Video
     Resolution, Audio, Microphone, Video, Photo, etc.

Warning:

This device complies with Part 15 of the FCC Rules. Operation is
subject to specific conditions regarding interference and
compliance with RF Exposure guidelines.

RF Exposure Statement:

To maintain compliance with FCC’s RF Exposure guidelines, this
equipment should be installed and operated with a minimum distance
of 20cm from your body. The device and its antenna(s) must not be
co-located or operated in conjunction with any other antenna or
transmitter.

FAQs

Q: What is the maximum capacity of the Micro SD card supported

by the camera?

A: The camera supports Micro SD cards up to 32GB capacity.
Please ensure you use a card within this limit for optimal
performance.

Q: How can I reset the camera?

A: To reset the camera, press and hold the MODE button for 6
seconds. This will initiate the reset process.

“`

A3

A3 WIFI Camera

Thanks for choosing our small wireless camera. Please follow the manual to set up the camera.
I . Product Description
ON/OFF: Plugged in and switched on successfully with the indicator light on; switched off by long press of the button or by unplugging the power supply; MODE: Press for 6 seconds to reset the camera; CARD PORT: Insert Micro SD card to save recordings (Max 32G, not included);
. APP Settings
1. Download the app “iWFCam” Scan the QR code below to download the APP compatible with your phone system.

2. Camera-Phone Connection(AP Mode): —Switching on the device; —Tap into your phone Settings WLAN, find the camera hotspot signal(named with BK*** without password), then connect it; —If you are using Android phones, it’ll pop-up a message to Confirm Connection, please keep connecting with the camera; Please refer to the below pics. Note: Camera-phone connection should be finished within 5 meters for strong signal.

3. Camera-APP Remote Connection(IP Mode) —Start APP iWFCam, the camera will auto be added Online; —Click Setting icon beside the camera in the APP, set Wifi Config; choose the router and enter the router network password; —Wait for the camera’s update process for remote control; Once it shows Online, it means you have successfully done it; Please refer to the below pics. Note: Camera-router connection should be finished within 5 meters for strong signal.

4. Camera Live-feed Page —Click the camera in the APP, it will pop-up message to change the password; skip or change it for security; —Then you can see the live feed camera; in this page, you can adjust the Brightness, Night Vision Video Resolution, Audio, Microphone, Video, Photo, etc. Please refer to the below pics.

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different. from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. NOTE: This device and its antenna(s) must not be co- located or operation in conjunction with any other antenna or transmitter
RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>