MALLOCA MSO-A75TFT Built In Oven User Manual

MSO-A75TFT Built In Oven

Specifications

• Model: MSO-A75TFT / MSO-B75TFT
• Usage: Built-in Oven
• Intended Use: Indoor domestic household use only
• Installation: Can be installed in a worktop or wall unit
• Electrical Connection: Should be carried out by an authorized service person

Product Usage Instructions

Safety Instructions

General Safety Warnings

• Heating elements may become hot during use. Avoid touching them.
• Do not store items on the cooking surfaces to prevent fire hazards.
• Keep young children away from the appliance when in use.

Installation Warnings

• Ensure proper installation to prevent overheating, especially with a decorative door.

During Usage

• Avoid using oils that can catch fire under extreme heat conditions.
• In case of oil-caused flames, switch off the oven and cover the pan instead of pouring water.

FAQ:

Q: Can this oven be used for purposes other than home cooking?
A: No, the appliance is designed only for home cooking. Other uses are considered improper and dangerous.

Thank you for choosing this product.
This User Manual contains important safety information and instructions on the operation and maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and keep this book for future reference.

SAFETY INSTRUCTIONS

• Read these instructions carefully and completely before using your appliance and keep them in a convenient place for reference when necessary.
• This manual is prepared for more than one model. Your appliance may not have some of the features described in this manual. Pay particular attention to any figures while you are reading the operating manual.

General Safety Warning

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Keep children less than 8 years of age away unless they are continuously supervised.

• WARNING: Danger of fire: Do not store items on the cooking surfaces.

• WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.

• Do not operate the appliance by means of an external timer or separate remote-control system.

• During use the appliance will get hot. Care should be taken to avoid touching heating elements inside the oven.

• During use handles held for short periods in normal use may get hot.

• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass and other surface. They can scratch the surface which may result in shattering of the glass or damage to the surface.

• Do not use steam cleaners for cleaning the appliance.

• WARNING: To avoid the possibility of electric shocks, make sure that the appliance is switched off before replacing the lamp.

• CAUTION: Accessible parts may be hot when cooking or grilling. Keep young children away from the appliance when it is in use.

• Your appliance is produced in accordance with all applicable local and international standards and regulations.

• Maintenance and repair work must only be carried out by authorised service technicians. Installation and repair work that is carried out by unauthorised technicians may be dangerous. Do not alter or modify the specifications of the appliance in any way. Inappropriate hob guards can cause accidents.

• Before connecting your appliance, make sure that the local distribution conditions (nature of the gas and gas pressure or electricity voltage and frequency) and the specifications of the appliance are compatible. The specifications for this appliance are stated on the label.

• CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic household use only. It should not be used for any other purpose or in any other application, such as for non-domestic use or in a commercial environment or room heating.
  Do not use the oven door handles to lift or move the appliance.

• All possible measures have been taken to ensure your safety. Since the glass may break, care should be taken while cleaning to avoid scratching. Avoid hitting or knocking the glass with accessories.

• Make sure that the supply cord is not trapped or damaged during installation. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to prevent a hazard.

• Do not let children climb on the oven door or sit on it while it is open.

• Please keep children and animals away from this appliance.

Installation WarninGS

• Do not operate the appliance before it is fully installed.
• The appliance must be installed by an authorised technician. The manufacturer is not responsible for any damage that might be caused by defective placement and installation by unauthorised people.
• When the appliance is unpacked, make sure that it is has not been damaged during transportation. In case of any defect do not use the appliance and contact a qualified service agent immediately. The materials used for packaging (nylon, staplers, styrofoam, etc.) may be harmful to children and they should be collected and removed immediately.
• Protect your appliance against atmospheric effects. Do not expose it to effects such as sun, rain, snow, excessive humidity etc.
• The material around the appliance (cabinet) must be able to withstand a minimum temperature of 100°C.
  The appliance must not be installed behind a decorative door, in order to avoid overheating.

During uSaGe

• When you first use your oven you may notice a slight smell. This is perfectly normal and is caused by the insulation materials on the heater elements. We suggest that before using your oven for the first time you leave it empty, and set at maximum temperature for 45 minutes. Make sure that the environment in which the product is installed is well-ventilated.
  Take care when opening the oven door during or after cooking. The hot steam from the oven may cause burns.

• Do not put flammable or combustible materials in or near the appliance when it is operating.

• Always use oven gloves to remove and replace food in the oven.

• Under no circumstances should the oven be lined with aluminium foil as overheating may occur.

• Do not place dishes or baking trays directly onto the base of the oven whilst cooking. The base becomes very hot and damage may be caused to the product.

• Do not leave the oven unattended while cooking with solid or liquid oils. They may catch fire under extreme heating conditions. Never pour water on to flames that are caused by oil, instead switch the oven off and cover the pan with its lid or a fire blanket.

• If the product will not be used for a long period of time, turn the main control switch off.

• Make sure the appliance control knobs are always in the “0” (stop) position when it is not used.

• The trays incline when pulled out. Take care not to spill or drop hot food when removing it from the ovens.

• Do not place anything on the oven door when it is open. This could disrupt the balance of the oven or damage the door.

• Do not hang towels, dishcloths or clothes from the appliance or its handles.

• It is recommended to use soft water to avoid excess amount of limescale residue in steam generating system over time. To check the softness of water please use the test paper given with the product and the table below. Test paper is kept in water for 3 seconds, and taken out after a minute stripes become visible on the paper.
  
  If the correct water hardness level is not set, this could affect appliance operation and its useful life.

• Do not use other liquids than still water.

• Do not use hot water.

• Keep the water tank closed when the oven is operating.

• When oven is hot and oven door is opened, hot air steam may come over so stand away and also keep children away while opening oven door.

• To avoid limescale residual in the cavity, clean the cavity after each use.
  After the cooking process, the remaining water in the system should be removed. To do that please select “Yes” when automatically asked on the screen after cooking process. Do not leave anything in the oven during this operation.

During Cleaning and Maintenance

• Make sure that your appliance is turned off at the mains before carrying out any cleaning or maintenance operations.
• Do not remove the control knobs to clean the control panel.
• To maintain the efficiency and safety of your appliance, we recommend you always use original spare parts and to call our authorised service agents in case of need.

CE Declaration of conformity

We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced.

This appliance has been designed to be used only for home cooking. Any other use (such as heating a room) is improper and dangerous.
The operating instructions apply to several models. You may notice differences between these instructions and your model.

 INSTALLATION AND PREPARATION FOR USE

WARNING: This appliance must be installed by an authorized service person or qualified technician, according to the instructions in this guide and in compliance with the current local regulations.

Incorrect installation may cause harm and damage, for which the manufacturer accepts no responsibility and the warranty will not be valid.
Prior to installation, ensure that the local distribution conditions (electricity voltage and frequency) and the adjustments
of the appliance are compatible. The adjustment conditions for this appliance are stated on the label.

• The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.).
• If the product contains removable shelf guides (wire racks) and the user manual includes recipes like yoghurt, the wire racks shall be removed and the oven operated in the defined cooking mode. Removal of the Wire Shelf  information is included in the CLEANING AND MAINTENANCE section.

instructions for the inStaller General instructions

• After removing the packaging material from the appliance and its accessories, ensure that the appliance is not damaged. If you suspect any damage, do not use it and contact an authorised service person or qualified technician immediately.
• Make sure that there are no flammable or combustible materials in the close vicinity, such as curtains, oil, cloth etc. which may catch fire.
• The worktop and furniture surrounding the appliance must be made of materials resistant to temperatures above 100°C.
• The appliance should not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer.

Installation of the Oven
The appliances are supplied with installation kits and can be installed in a worktop with the appropriate dimensions. The dimensions for hob and oven installation are given below.

After making the electrical connections, insert the oven into the cabinet by pushing it forward. Open the oven door and insert 2 screws in the holes located on the oven frame. While the product frame touches the wooden surface of the cabinet, tighten the screws.

Electrical Connection and Safety
WARNING: The electrical connection of this appliance should be carried out by an authorised service person or qualified electrician, according to the instructions in this guide and in compliance with the current local regulations.
WARNING: THE APPLIANCE MUST BE EARTHED.

• Before connecting the appliance to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the appliance’s power rating (also indicated on the identification plate).

• During installation, please ensure that isolated cables are used. An incorrect connection could damage your appliance. If the mains cable is damaged and needs to be replaced this should be done by a qualified personnel.

• Do not use adaptors, multiple sockets and/or extension leads.

• The supply cord should be kept away from hot parts of the appliance and must not be bent or compressed. Otherwise the cord may be damaged, causing a short circuit.

• If the appliance is not connected to the mains with a plug, a all-pole disconnector (with at least 3 mm contact spacing) must be used in order to meet the safety regulations.
  The appliance is designed for a power supply of 220-240V If your supply is different, contact the authorised service person or a qualified electrician.

• The power cable (H05VV-F) must be long enough to be connected to the appliance, even if the appliance stands on the front of its cabinet.

• Ensure all connections are adequately tightened.

• Fix the supply cable in the cable clamp and then close the cover.

• The terminal box connection is placed on the terminal box.

PRODUCT FEATURES

Important: Specifications for the product vary and the appearance of your appliance may differ from that shown in the figures below.

List of Components

1. Control Panel

2. Oven Door Handle

3. Oven Door
   Control Panel

4. Oven Function Control Knob

5. Timer

6. Oven Thermostat Knob

7. Water Tank Cover

USE OF PRODUCT

oven ControlS

Left knob

• Long push: Switch on / off
• Short push: Pause cooking
• Turn right: Key lock
• Turn left: Undo / Go to previous menu Right knob
• Push: Select / Start Cooking / Start manual steam operation
• Turn Right: Menu Navigation / Increase Temperature
• Turn Left: Menu Navigation / Decrease Temperature

Oven Functions

• The functions of your oven may be different due to the model of your product.

Oven Lamp: Only the oven light will switch on. It will remain on for the duration of the cooking function.
Static Cooking Function: The oven’s thermostat and warning lights will switch on, and the lower and upper heating elements will start operating. The static cooking function emits heat, ensuring even cooking of food. This is ideal for making pastries, cakes, baked pasta, lasagne and pizza. Preheating the oven for 10 minutes is recommended and it is best to use only one shelf at a time in this function.

• Fan Function: The oven’s thermostat and warning lights will switch on, and the upper and lower heating elements and fan will start operating.

• This function is good for baking pastry. Cooking is carried out by the lower and upper heating elements within the oven and by the fan, which provides air circulation, giving a slightly grilled effect to the food.
  It is recommended that you preheat the oven for about 10 minutes. The fan and lower heating function is ideal for baking food, such as pizza, evenly in a short period of time. The fan evenly disperses the heat of the oven, while the lower heating element bakes the food.

• Pizza Function: The oven’s thermostat and warning lights will switch on, and the ring, lower heating elements and fan will start operating. This function is ideal for baking food, such as pizza, evenly in a short time. While the fan evenly disperses the heat of the oven, the lower heating element ensures baking of the food.

• Grilling Function: The oven’s thermostat and warning lights will switch on, and the grill heating element will start operating. This function is used for grilling and toasting foods on the upper shelves of the oven. Lightly brush the wire grid with oil to stop food sticking and place food in the centre of the grid. Always place a tray beneath the food to catch any drips of oil or fat. It is recommended that you preheat the oven for about 10 minutes.

• Warning: When grilling, the oven door must be closed and the oven temperature should be adjusted to 190°C.

• Faster Grilling Function: The oven’s thermostat and warning lights will switch on, and the grill and upper heating elements will start operating. This function is used for faster grilling and for grilling food with a larger surface area, such as meat. Use the upper shelves of the oven. Lightly brush the wire grid with oil to stop food sticking and place food in the centre of the grid. Always place a tray beneath the food to catch any drips of oil or fat. It is recommended that you preheat the oven for about 10 minutes.
  Warning: When grilling, the oven door must be closed and the oven temperature should be adjusted to 190°C.

• Double Grill and Fan Function: The oven’s thermostat and warning lights will switch on, and the grill, upper heating elements and fan will  start operating. This function is used for faster grilling of thicker food and for grilling of food with a larger surface area. Both the upper heating elements and grill will be energised along with the fan to ensure even cooking. Use the upper shelves of the oven. Lightly brush the wire grid with oil to stop food sticking and place food in the centre of the grid. Always place a tray beneath the food to catch any drips of oil or fat. It is recommended that you preheat the oven for about 10 minutes.

• Warning: When grilling, the oven door must be closed and the oven temperature should be adjusted to 190°C.

• Defrost Function: The oven’s warning lights will switch on and the fan will start to operate. To use the defrost function, place your frozen food in the oven on a shelf in the third slot from the bottom. It is recommended that you place an oven tray under the defrosting food to catch the water accumulated due to melting ice. This function will not cook or bake your food, it will only help to defrost it.

• Turbo Function: The oven’s thermostat and warning lights will switch on, and the ring heating element and fan will start operating. The turbo function evenly disperses the heat in the oven so all food on all racks will cook evenly. It is recommended that you preheat the oven for about 10 minutes.

Manual Aiding Steam Function:
This function can be used any other cooking functions.
It is used for cooking all types of vegetables, smaller chunks of meat, fruit, and side dishes (rice, pasta).

The advantages;

• Crispy and shiny surface on foods
• Minimum loss of water
• Almost no loss of nutrients
• Low-fat cooking

You can select the desired function and steam density. Steam density table is on the next page.

Filling the Water Tank

• The water tank volume is 300 ml. This amount allows 3 cycles of steam aiding. For each cycle around 100 ml water is used.

• Push the tank cover to open

• Pull the water tank out slightly. The tank must not be taken out

• Add the minimum 100 ml water into the tank before usage.

The maximum water level is indicated as “MAX” on the tank.

• Push on the tank cover to close.

Vap clean+ function
Vapclean+ function provides easy cleaning. You will find this function under ‘Cleaning’ menu. Before running this function please add 300 ml water into the tank. For adding water please follow the instruction given under title ‘Filling Water Tank’.

Cooking table

*If available cook with roast chicken skewer.

Us e of the Smart LCD Control Unit
Ready Cook is designed to help home users to implement professional cooking recipes easily using the built-in auto cooking functions.
The Ready Cook menus, such as Manual Cooking, Auto Cooking, Favourites, Cleaning, and Settings, are described below.

You can adjust every cooking setting in Manual Cooking mode, including the 7 different cooking functions, the temperature, the boost function, the cooking duration, and the cooking end time. Follow the steps listed below to navigate the Manual Cooking menu.

The main menu

• Rotate the right knob in either direction until “Manual Cooking” is highlighted.
• Press the right knob to select the highlighted option.

Oven function

• Rotate the right knob in either direction to navigate between the available oven functions.
• Press the right knob to select the highlighted option.

Steam Aid Cooking

• Rotate the right knob in either direction to highlight Steam aid cooking “ON” or “OFF”.
• Press the right knob to select the highlighted option.
• Press the right knob to select to “1 steam injection”.
• Add 100 ml of water into the water tank. Press the right knob to select to “Add 100 ml water”.
• Rotate one times the right knob to 2 steam injection.
• Press the right knob to select the highlighted option.
• Add 200 ml of water into the water tank.
• Press the right knob to Add 200 ml water.
• Rotate two times the right knob to 3 steam injection.
• Press the right knob to select the highlighted option.
• Add 300 ml of water into the water tank.
• Press the right knob to Add 300 ml water.
• Rotate two times the right knob to auto steam injection.
• Press the right knob to select the highlighted option.
• Add 100ml of water into the water tank.
• Press the right knob to Add 100 ml water.

Temperature

• Rotate the right knob in either direction to navigate between the available temperature settings.
• Press the right knob to select the highlighted option.

Boost

• Rotate the right knob in either direction to highlight Boost “ON” or “OFF”.
• Press the right knob to select the highlighted option.
• Use this function to heat the oven the desired temperature as quickly as possible. This mode is not appropriate for cooking.

Cooking duration

• Rotate the right knob in either direction to change the cooking duration.
• Press the right knob to set the cooking duration.
• NOTE: If the cooking duration is set to 00:00, cooking will continue until you manually stop it.

Cooking end time

• Rotate the right knob in either direction to change the cooking end time.
• Press the right knob to set the cooking end time.

The cooking end time cannot be set when the grill functions are activated. If the cooking end time was set before activating the grill functions, the cooking end time will be canceled after the grill functions are selected.

The information screen

• Cooking will begin within 10 seconds of the last action, or when the right knob is pressed.
• Rotate the left knob anti-clockwise to go back to the previous setting.

The animation screen displays:

• Cooking time
• Temperature
• Cooking start and end time
• Cooking function information.

The animation screen

• Press the left knob to stop cooking.
• Press the right knob to start / continue cooking.
• Rotate the right knob in either direction to change the temperature.
• Rotate the left knob anti-clockwise, while any cooking function is active, to display the oven function, temperature, and cooking time setting screen.
• To stop cooking and return to the main menu, press the left knob then rotate it anti-clockwise.

Auto Cooking
Ready Cook has built-in, previously determined, recipe functions that can be selected in the Auto Cooking menu. You will only be able to select the name of the desired meal. It will not be possible to alter any of the recipe settings, including cooking duration and temperature, as these are automatically set by Ready Cook.
Follow the steps below to perform auto cooking.

The main menu

• Rotate the right knob in either direction until “Auto Cooking” is highlighted.
• Press the right knob to select the highlighted option.

Food categories

• Rotate the right knob in either direction to navigate between the available recipes.
• Press the right knob to select the highlighted option.

Recipe selection

• Rotate the right knob in either direction to navigate between the available recipes.
• Press the right knob to select the highlighted option.

Steam injection

• Rotate the right knob in either direction to highlight Steam injection On or Off.
• Press the right knob to select the highlighted option.
• Add 200 ml of water into the water tank.
• Press the right knob to Add 200 ml water.

Food weight

• Rotate the right knob in either direction to change the weight value.
• Press the right knob to set the weight.

Cooking end time

• Rotate the right knob in either direction to change the cooking end time.
• Press the right knob to set the cooking end time.

The information screen

• Cooking will start within 10 seconds of no activity, or when the right knob is pressed.
• Rotate the left knob anti-clockwise to go back through the previous setting screens.
• Place food on the middle shelf to achieve the best cooking results.

The animation screen

• Press the left knob to stop cooking.
• Press the right knob to start and continue cooking.
• To stop cooking and return to the main menu, press the left knob and rotate it anti-clockwise.

Favorites
It is possible to save your manual cooking settings, allowing you to quickly select the same cooking settings at any time. At the end of the Manual Cooking menu, after the cooking duration setting, you will be asked whether you want to save the settings to your favourites.
To create a favourite cooking setting, use the edit function in the Favourites menu.
To select and begin a favourite function, follow the steps below.

On the main menu

• Rotate the right knob in either direction until ‘Favourites’ is highlighted.
• Press the right knob to select the highlighted option.

Favorites

• Rotate the right knob in either direction to navigate between the available options.
• Press the right knob to select the highlighted option.
• The settings stored in the favourite will be displayed at the bottom of the screen.

The run/edit screen

• Rotate the right knob to highlight “Run”.
• Press the right knob to select “Run”.

Cooking end time

• Rotate the right knob in either direction to change the cooking end time.
• Press the right knob to set the cooking end time.

The information screen

• Cooking will start within 10 seconds of no activity, or when the right knob is pressed.
• Rotate the left knob anti-clockwise to go back through the previous setting screens.
• Place food on the middle shelf to achieve the best cooking results.

The animation screen

• Press the left knob to stop cooking.
• Press the right knob to start and continue cooking.
• To stop cooking and return to the main menu, press the left knob and rotate it anti-clockwise.

To edit any Favourites settings, follow the steps below.

The main menu

• Rotate the right knob in either direction until “Favourites” is highlighted.
• Press the right knob to select the highlighted option.

Favorites

• Rotate the right knob in either direction to navigate between the available options.
• Press the right knob to select the highlighted option.
• The settings stored in the selected ‘Favourite’ will be displayed at the bottom of the screen.

The run/edit screen

• Rotate the right knob to highlight “Edit”.
• Press the right knob to select “Edit”.

Oven function

• Rotate the right knob in either direction to navigate between the available oven functions.
• Press the right knob to select the highlighted option.

Temperature

• Rotate the right knob in either direction to navigate between the available temperature settings.
• Press the right knob to select the highlighted option.

Boost

• Rotate the right knob in either direction to highlight Boost “ON” or “OFF”.
• Press the right knob to select the highlighted option.
• Use this function to heat the oven the desired temperature as quickly as possible. This mode is not appropriate for cooking.

Cooking duration

• Rotate the right knob in either direction to change the cooking duration.
• Press the right knob to set the cooking duration.

Oven shelf

• Rotate the right knob in either direction to navigate between the available oven shelves.
• Press the right knob to select the shelf
• For the same cooking results each time, oven shelf information is important.

The information screen

• Rotate the left knob anti-clockwise to go back through the previous setting screens.

Save to favorites

• Rotate the right knob to highlight “Save” (to save the settings) or “Cancel” (to discard the settings).
• Press the right knob to select the highlighted option.

Cleaning
With the Vapclean function, dried residue within the oven will be softened with vapour. To perform Vapclean, pour a glass of water onto the oven shelf at the bottom of the oven, then follow the steps listed below.

On the main menu

• Rotate the right knob in either direction until “Cleaning” is highlighted.
• Press the right knob to select the highlighted option.

The function selection screen

• Press the right knob to select “Vapclean”.

Steam injection

• Add 300 ml of water into the water tank.
• Press the right knob to Add 300 ml water.
• Time default is 60 minutes.

The information screen

• Cleaning will start within 10 seconds of no activity, or when the right knob is pushed.
• Rotate the left knob anti-clockwise to go back through the previous setting screens.

The animation screen

• Press the left knob to stop cleaning.
• Press the right knob to start and continue cleaning.
• To stop cleaning and return to the main menu, press the left knob and rotate it anti-clockwise.

Settings
The settings menu allows you to change and set the date, time, screen brightness, buzzer tone, and language option.

The main menu

• Rotate the right knob in either direction until ‘Settings’ is highlighted.
• Press the right knob to select the highlighted option.

The languages menu

• Rotate the right knob in either direction to change the language.
• Press the right knob to set the desired language.

The date menu

• Rotate the right knob in either direction to change the date.
• Press the right knob to set the date.
• The date is set in the format: month, day, year.

The clock menu

• Rotate the right knob in either direction to change the clock.
• Push the right knob to set the clock.
• Clock is set in the format: minute and hour.
• After setting the clock,secreensaver settings menu is shown on the display for standby.
• Rotate the right knob in either direction to highlight Secreensaver “ON” or “OFF”.
• Press the right knob to select the highlighted option.

The brightness menu

• Rotate the right knob in either direction to change the screen brightness between the levels 0 and 4.
• Press the right knob to set the screen brightness.

On the buzzer tone menu

• Rotate the right knob in either direction to choose from 3 different buzzer tones.
• Press the right knob to set the desired buzzer tone.

The software version menu

• The software version will be displayed as information only. It cannot be changed.

Key lock
The key lock is used to avoid unintentional changes being made to the oven settings. To activate or deactivate the key lock, rotate the left knob anti- clockwise and hold it for 3 seconds. While the key lock is active, only the “ON/OFF” button can be activated. All other buttons will be locked.

Acc ess ories
The EasyFix Wire Rack
Clean the accessories thoroughly with warm water, detergent and a soft clean cloth on first use.

• Insert the accessory to the correct position inside the oven.
• Allow at least a 1 cm space between the fan cover and accessories.
• Take care removing cookware and/or accessories out of the oven. Hot meals or accessories can cause burns.
• The accessories may deform with heat. Once they have cooled down, they will recover their original appearance and performance.
• Trays and wire grids can be positioned on any level from of 1 to 7.
• Telescopic rail can be positioned on levels T1, T2, 3, 4, 5, 6, 7.
• Level 3 is recommended for single level cooking.
• Level T2 is recommended for single level cooking with the telescopic rails.
• Level 2 and Level 4 are recommended for double level cooking.
• The turnspit wire grid must be positioned on Level 3.
• Level T2 is used for turnspit wire grid positioning with the telescopic rails.

Accessories may vary depending on the model purchased.

The Deep Tray
The deep tray is best used for cooking stews.
Put the tray into any rack and push it to the end to make sure it is placed correctly.

Wire Rack with Easyfix Full Extension Telescopic Rail
The telescopic rail extends out fully to allow easy access to your food.

Telescopic rails
Clean the accessories thoroughly with warm water, detergent and a soft clean cloth on first use.

• Positioning of the telescopic rails on the wire rack is secured with the fastening tabs on the fasteners.
  

• Remove the side runner. See section “Removal of the wire shelf”.

• On each telescopic rail there are top and bottom fasteners that allows you to reposition the rails.

• Hang the telescopic rail top fasteners on the side rack level reference wire and simultaneously press the bottom fasteners until you clearly hear the fasteners clip into the side rack level fixing wire.

• In order to remove, hold the front surface of the rail and follow the previous instructions in reverse.

The Wire Grid
The wire grid is best used for grilling or for processing food in oven- friendly containers.

WARNING
Place the grid to any corresponding rack in the oven cavity correctly and push it to the end.

Soft-Close Oven Door
The oven door closes slowly by itself when it is released just before the closed position.

The Water Collector
In some cases of cooking, condensation may appear on the inner glass of the oven door. This is not a product malfunction.
Open the oven door into the grilling position and leave it in this position for 20 seconds.

Water will drip to the collector.
Cool the oven and wipe the inside of the door with a dry towel. This procedure must be applied regularly.

Removal of the Inner Glass
You must remove the oven door glass before cleaning, as shown below.

1. Push the glass in the direction of B and release from the location bracket (x). Pull the glass out in the direction of A.
   To replace the inner glass:

2. Push the glass towards and under the location bracket (y), in the direction of B.

3. Place the glass under the location bracket (x) in the direction of C.

If the oven door is a triple glass oven door, the third glass layer can be removed the same way as the second glass layer.

Removal of the Oven Door
Before cleaning the oven door glass, you must remove the oven door, as shown below.

1. Open the oven door.
2. Open the locking catch (a) (with the aid of a screwdriver) up to the end position.
3. Close the door until it is almost in the fully closed position, and remove the door by pulling it towards you.

Removal of the Wire Shelf
To remove the wire rack, pull the wire rack as shown in the figure. After releasing it from the clips (a), lift it up.

CLEANING AND MAINTENANCE

Cleaning

WARNING: Switch off the appliance and allow it to cool before cleaning is to be carried out.

General Instructions

• Check whether the cleaning materials are appropriate and recommended by the manufacturer before use on your appliance.
• Use cream cleaners or liquid cleaners which do not contain particles. Do not use caustic (corrosive) creams, abrasive cleaning powders, rough wire wool or hard tools as they may damage the cooker surfaces.
• Do not use cleaners that contain particles as they may scratch the glass, enamelled and/or painted parts of your appliance.
• Should any liquids overflow, clean them immediately to avoid parts becoming damaged.
• Do not use steam cleaners for cleaning any part of the appliance.

Cleaning the Inside of the Oven

• The inside of enamelled ovens are best cleaned while the oven is warm.
• Wipe the oven with a soft cloth soaked in soapy water after each use. Then, wipe the oven over again with a wet cloth and dry it.
• You may need to use a liquid cleaning material occasionally to completely clean the oven.

Cleaning the Glass Parts

• Clean the glass parts of your appliance on a regular basis.
• Use a glass cleaner to clean the inside and outside of the glass parts. Then, rinse and dry them thoroughly with a dry cloth.

Cleaning the Stainless Steel Parts (if available)

• Clean the stainless steel parts of your appliance on a regular basis.
• Wipe the stainless steel parts with a soft cloth soaked in only water. Then, dry them thoroughly with a dry cloth.
• Do not clean the stainless steel parts while they are still hot from cooking.
• Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the stainless steel for a long time.

Cleaning Painted Surfaces (if available)

• Spots of tomato, tomato paste, ketchup, lemon, oil derivatives, milk, sugary foods, sugary drinks and coffee should be cleaned with a cloth dipped in warm water immediately. If these stains are not cleaned and allowed to dry on the surfaces they are on, they should NOT be rubbed with hard objects (pointed objects, steel and plastic scouring wires, surface-damaging dish sponge) or cleaning agents containing high levels of alcohol, stain removers, degreasers, surface abrasive chemicals. Otherwise, corrosion may occur on the powder painted surfaces, and stains may occur. The manufacturer will not be held responsible for any damage caused by the use of inappropriate cleaning products or methods.

Maintenance

WARNING: The maintenance of this  appliance should be carried out by an authorised service person or qualified technician only.

Changing the Oven Lamp
WARNING: Switch off the appliance and allow it to cool before cleaning your appliance.

• Remove the glass lens, then remove the bulb.
• Insert the new bulb (resistant to 300 °C) to replace the bulb that you removed (230 V, 15-25 Watt, Type E14).
• Replace the glass lens, and your oven is ready for use.
• The product contains a light source of energy efficiency class G.
• Light source can not be replaced by end user. After sales service is needed.
• The included light source is not intended for use in other applications.

The lamp is designed specifically for use in household cooking appliances. It is not suitable for household room illumination.

TROUBLESHOOTING&TRANSPORT

TroubleShootinG

If you still have a problem with your appliance after checking these basic troubleshooting steps, please contact an authorised service person or qualified technician.

tranSport
If you need to transport the product, use the original product packaging and carry it using its original case. Follow the transport signs on the packaging. Tape all independent parts to the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance, especially the external surfaces of the product, is protected against external threats.

TECHNICAL SPECIFICATIONS

Energy Fiche

MALLORCA VIETNAM COMPANY LIMITED Showroom:
279 Nguyen Van Troi Street, Ward 10, Phu Nhuan District,
HCM City Tel: (84) 28 39975 893 / 94
Fax: (84) 28 38447 102 – (84) 28 38633 882
Email: info@malloca.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>