Innovink JH-803L2 Headphone User Manual
- September 5, 2024
- Innovink
Table of Contents
Innovink JH-803L2 Headphone
Specifications:
- Model name: JH-803L2
- Bluetooth version: Bluetooth 4.2
- Working distance: Up to 10 meters
- Frequency response: 20Hz – 20kHz
- Input Voltage: DC 5V
- Charging time: Approximately 2 hours
- Charging port: Type-C
- Speaker driver unit: 40mm
Product Usage Instructions
Power On/Off:
-
Power on: Press and hold the power button until the blue indicator light stays on for 3 seconds. The red and blue indicators will blink alternately, indicating pairing status.
-
Power off: Press and hold the power button for about 2 seconds until the red indicator turns on for about 1 second and then goes off.
Pairing:
Turn on the Bluetooth switch on your device and search for the pairing name
“JH-803L2”. Click on it to connect once it appears in the list. The blue
indicator will blink every 6 seconds once paired successfully.
EQ Mode Switch:
Select between Bass mode, Pop mode, and Vocal mode by clicking the EQ
switch button while playing music.
Frequently Asked Questions (FAQ):
-
Q: How do I reset the headphones?
A: Press and hold the volume up (+) and volume down (-) buttons simultaneously for about 3 seconds until the red and blue indicators blink alternately. -
Q: How do I switch between different EQ modes?
A: While playing music, click the EQ switch button to cycle through Bass mode, Pop mode, and Vocal mode.
Product function instructions
- “+”: Volume up/Next song
- “-”: Volume down/Previous song
- ” ”: Power on/off, Music play/pause
- 3.5mm jack
- Bluetooth indicator, charging indicator， LED light on/off
- Type-C charging port
- Microphone
- Call/EQ switch
Product operation instructions
Power on/off
- Power on:Press and hold “ ” around 2 seconds until the blue indicator is on 3 seconds ,then the red and blue indicator blinks alternately,it will be pairing status;
- Power off:Press and hold “ ” around 2 seconds,the red indicator will be on for around 1 second and goes off.
Pairing
- Turn on the Bluetooth switch of the mobile phone or other devices(such as PC,Tablet etc), and enter into the Bluetooth list , search for the pairing name “JH-803L2”;
- When seeing the pairing name “JH-803L2” on the list,click it to connect the headset with your device; Once paired successfully, the blue indicator would blinks every 6 seconds.
EQ mode switch
There are 3 different EQ modes for option, they are : Bass mode, Pop mode and
vocal mode. When playing music,click the ⑧ button to switch to different EQ
mode.
Music playing
- Volume up: Click the ① button to increase volume
- Volume down: Click the ② button to decrease volume
- Next song: Press and hold the ① button around 2 seconds
- Previous song: Press and hold the ② button around 2 seconds
- Music play/pause: Click the ③ button
Calling (Mobile)
- Answer call: Click the ⑧ button when call is coming
- End call: Click the ⑧ button when call is over
- Cancel call: Click the ⑧ button when calling
- Reject call: Press and hold the ⑧ button around 2 seconds when call is coming
- Redial: Double-click the ⑧ button to redial last call number
Reset:
Press and hold the “+” and ”-” button at the same time around 3 seconds until
the red and blue indicator blinks alternately.
Siri or Google Assistant:
In standby mode or music mode, Press and hold the ⑧ button for around 2
seconds
LED light on/off
LED indicator on/off: Double click the “ ” button
Bluetooth indicator instructions
| Connect successfully | The blue indicator blinks every 6 seconds |
|---|---|
| Pairing status | The red and blue indicator blink alternately |
| Reset | The red and blue indicator blink alternately |
| Listen to music | The blue indicator blinks every 6 seconds |
| Charge fully | The indicator will be off |
| Power off | The red indicator will be on around 1 second then goes off |
| Charging | The indicator will be solid red |
AUX mode
Connect one end of the 3.5mm audio cable into the audio jack of the headset；
Connect the other end into your mobile phones or other device,then can play
music directly
Note : The headphones will be power off once plug the 3.5mm audio cable
into audio jack(When headphones is power on),the 3.5mm audio cable must be
taken out from the headphone if need to turn on the headphone
Charging instruction
Before using, please check and assure the battery is enough.
While the headphones is in low battery, please use Type-C charging cable to
charge and the charging indicator will be red when charging. Once it’s fully
charged,the indicator will be off.
Technical parameters
| Model name | JH-803L2 |
|---|---|
| Bluetooth version | V5.3 |
| Working distance | >10m |
| Frequency response | 2402-2480MHz |
| Input Voltage | DC 5V,0.5A |
| Charging time | About 2H |
| Charging port | Type-C |
| Speaker driver unit | Φ 40mm,32Ω |
FAQ
-
Headphones can’t be turned on
Please ensure the battery is enough. -
Pairing failure
Please ensure the headphone is in power on and pairing status, and the mobile or other device is located within 1 m range, And then redo again. -
Connect automatically
The headphones will automatically connect the mobile or other devices used last time -
The sound cut off/stuck
Check whether the mobile or other devices locate valid range (10m) and whether there are obstacles between the headphones and the mobile. -
Charging way
Please ensure the charging adaptor is DC 5V/1A,or Car charger or power bank to charge the headphones.
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note :This equipment has been tested and found to comply with the limits for a class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>