CHESTERTON EN600491 Connect Gauge User Guide

June 3, 2024
CHESTERTON

CHESTERTON logo QUICK START GUIDE
Chesterton Connect™ Gauge
CHESTERTON EN600491 Connect Gauge

Installation

A. Install provided battery.
CHESTERTON EN600491 Connect Gauge - Figure 1 B. Apply thread sealant on the 1/4″ NPT threads.
Install the pressure sensor.
WRENCH TIGHTEN 2-3 TURNS PAST FINGER TIGHT POSITION.CHESTERTON EN600491
Connect Gauge - Figure 2

Download Chesterton Connect™ App

Follow setup instructions in the mobile app.CHESTERTON EN600491 Connect
Gauge - Figure 3http://kaywa.me/IQjf8
http://kaywa.me/Nk4Zt

Device Registration

  • Select the Chesterton Connect Gauge to be added to the Chesterton Connect Cloud
  • Enter a name (i.e. location) then select the desired Chesterton Connect Cloud account and select “Register”.

CHESTERTON EN600491 Connect Gauge - Figure 4 ¹Note: Chesterton Connect™ Gateway required for syncing to the Chesterton Connect™ Cloud
²Note: Chesterton Connect™ Cloud account required prior to setup

Warnings and Cautions

  • Product is intended for use in industrial or commercial environments.
  • Before installation, please verify that the product matches its intended use, especially the pressure fittings and pressure range.
  • Chesterton Connect™ Gauge uses a coin cell CR2050 battery. Follow local laws for proper treatment and disposal of this product and components.
  • Disable the product if it is damaged or operates incorrectly.
  • Make sure the product is used as specified and within its advertised operating limits.
  • Do not drop the Chesterton Connect™ Gauge product. Dropping the product may affect its ability to function properly.
  • Follow all nearby PPE and equipment safety requirements when installing, troubleshooting or removing the sensor and its components.
  • Ensure the process fluid is compatible with the stainless-steel sensor pressure port.
  • Sensitive diaphragm inside. Do not insert anything into the pressure port or attempt to clean using compressed air or liquids.

For support visit: connect.support@chesterton.com
Inside USA: 833-677-7343
International: +1 83 367 77343CHESTERTON logoChesterton Connect™ is a trademark of A.W. Chesterton Company. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by A.W. Chesterton is under license. Apple, the Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple inc. Google Play, the “Android” name, the Android logo, the “Google play” brand, and other Google trademarks, are property of Google LLC.
To view Chesterton’s privacy policy please visit: chesterton.com/en- US/Pages/Privacy.aspx
© 2022 A.W. Chesterton Company.
®Registered trademark owned by A.W. Chesterton Company in USA and other countries, unless otherwise noted.

A.W. Chesterton Company, 860 Salem Street, Groveland, MA 01834 USA
Telephone: 781-438-7000,
Fax: 978-469-6528, chesterton.com
Form No. EN600491
Chesterton Connect™ Gauge Quick Start Guide

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals