beok-controls TGM50 Smart WiFi Underfloor Thermostat User Guide

TGM50 THERMOSTAT USER GUIDE

TGM50 Smart WiFi Underfloor Thermostat

This thermostat is suitable for water heatiing,electric heating and boiler
Welcome
Thank you for your trust and support!
We have adopted advanced technology and perfect craftsmanship so that your new thermostat will provide you with a suitable temperature environment every day in the future.

Main Functions and Characteristics

1. WIFI for Android & Apple iOS
2. Full-screen display and touchscreen
3. Power-off memory function
4. Real-time data save function
5. 5+2 or 6+1 or 7days six periods program schedule
6. Anti-freezing function
7. 3 sensor modes can be setting
8. Child lock function

Product Packaging

Model Spec

Technical Parameter:

≤16A(electric heating)
Power Consumption|  <1W
External Material| PC+ABS (flame retardant）
Sensing Element| NTC
Dimension| 5-95℃
Ambient Temp.| ±1℃ (adjustable 0.5-10℃)(Defaults)
Storage Temp.| 86x86x12.5mm
Set Temp. Range|  0-45℃,5-95％RH(Non-condensing）
Temperature hysteresis| -5~55℃
Timing Error| <1％

User Notes

1. Please read this manual carefully. Improper operation may damage the product or cause dangerous conditions.
2. The installation personnel must be well-trained and experienced service technicians.
3. After installation, please read this manual carefully and operate the product according to the instructions.

Caution: Risk of electric shock

Wiring Diagram

Installation Instruction

This product is suitable for standard 86*86mm wall box and 60 mm european round box.

1. Connect the power box according to the wiring diagram.
2. Separate the power supply from the control board cable.
3. Screw the power supply into the box of 86.
4. Connect the power board to the board line, and align the buckle at 30 degrees to complete the installation.

Description of display & icon

Operation Instruction

1. Power on/off
   Press to turn on/off the thermostat .

2. Set Temperature
   Press or to set the temperature.

3. Switch modes
   Press M key to switch between Manual and Leave mode Manual mode:means non- programmable mode. display on the screen, it is in Manual mode. Leave mode:one click to set temperature to 16°C display on the screen, it is in Leave mode. To change the Manual mode or Leave mode to the programming mode,you need to use Tuya Smart or Smart Life  APP.

4. Set the Child Lock
   Simultaneously press and for 5 seconds to add or cancel the child lock.

5. WiFi link
   In power on state,press and hold the key for 5-8 seconds. the Wi-Fi icon flashes on the thermostat display,and the thermostat enters the Wi-Fi configuration state.

6. Time programming instructions
   Please set up via Tuya Smart or Smart Life app

Working
day| 1| | 6:00| 20℃
2| | 8:00| 16℃
3| | 11:30| 16℃
4| | 12:30| 16℃
5| | 17:00| 22℃
6| | 22:00| 22℃
Rest day| 1| | 8:00| 16℃
2| | 23:00| 16℃

Remark:

1. The defaulted temperature of period3 and period4 is the same as period2. Please change it according to the request.
2. Do not set the last time point in the day beyond 23:59

Advanced Option Setting

In the state of power-off,press the key and the   key for 5 seconds to enter the advanced option setting.
Press key to enter the next option, press and to adjust, and press to save and exit.

Display Code| Function| Setting And Options| Factory Defaults
---|---|---|---
1| Temperature calibration| -9.9-9.9°C| -2°C
2| Sensor selection| IN:Use the internal sensor
OUT:Use the external sensor
ALL: Use both internal and external sensors.| IN
3| Limit temperature value modification| 35-60°C| 60°C
4| Temperature hysteresis| 0.5-10°C| 1°C
5| Antifreeze function| OFF:Close anti-frozen
ON:Open anti-frozen| OFF
6| Weekly programming mode setting| 7: 7 working days
6: 6 working day+1 rest day
5: 5 working day+2 rest day
OFF:turn off programming| 5
7| Main and auxiliary reverse selection (optional)| 00:close the main and auxiliary reversal function
01:indicate the auxiliary reversal
ATT:it is not recommended to adjust without professional guidance| 0
8| Standby backlight brightness| 00:turn off the backlight
01:low brightness
02:medium brightness
03:high brightness| 3
9| Set temperature upper limit| 15-95°C| 60°C
10| Sound| ON:turn on the sound
OFF:turn off the sound| ON
11| Window opening dection| ON:turn on the function OFF:turn off the function| ON
12| Power outage memory function| 0:Thermostat switch status is the same as before power failure
1:Thermostat opens after power restoration
2: Thermostat closed after power restoration| 0
13| Reset| long press button.After the drop sound, press the button to exit. Thermostat completes reset|

Note:
02 Sensor selection:
If no external sensor is connected, do not set it to OUT or ALL, otherwise Er will appear on the screen.And the thermostat will stop heating till the problem is solved.
If there is error of sensor Er will also appear on the screen.
05 Antifreeze function:
If Antifreeze function is turned on,when you turn off the thermostat,the room temperature and key is still displayed.
11 Window opening dection:
When the window opening detection is turned on,if the room temperature drops by 6 °C within 4 minutes,then window opening mode will be triggered. At this time,the thermostat will stop heating, and the window opening detection icon is displayed.
After the window opening mode is triggered,in the following three conditions, the mode will be exited:

1. the room temperature rises by 3 °C
2. 48 minutes after triggering
3. manual

Phone Port Operation Instruction

Preparation before Wi-Fi connection
APP download and account registration:
1.Download APP
For iOS system: Login in App Store, search “Tuya Smart”, you can download it on your iphone.
For Andriod system: Login in Google Play, search “ Tuya Smart” , you can download it on your phone.
Or scan below code to download:http://smart.tuya.com/download

2. Register Account
If you do not have an APP account yet, you can choose toregister or log in via SMS verification code. Click “Creat a new account”, you will enter the Tuya Smart Platform Privacy Policy page.
After you click Agree, you will officially enter the mobile phone registration page. The system automatically determines the current country/ region.You can also select the country/region manually. After entering your mobile phone number or email address, click “get verification code”. Enter the received verification code, then enter the password, and click “Finish” to register successfully. WIFI connection

1. Turn on your mobile phone‘s Bluetooth and wifi  (please make sure your mobile phone connect to 2.4Ghz Wi-Fi).

2. Activate the thermostat WiFi module:When the thermostat is turned on,press and hold the button for 5 seconds,the WIFI icon flashes on the thermostat display,and the thermostat enters the code matching state

3. Add Device
   There are 3 ways to add a device
   Method 1. Enter the Tuya APP. The main page automatically pops up “Device to be added” (as picture 1) and click “Add”. Method 2: Enter the Tuya APP,Click “Add Device” or “+” (as picture 2) on the upper right corner of the APP homepage,and enter the “Add Device” interface.It will prompt: find the deviceto be added (as picture 3) and follow the prompts. Method 3:Enter the Tuya APP,Click”+”on the upper right corner of the APP homepage,Find the temperature control product (Bluetooth + WIFI model)in the (small household appliance).(as picture 4)
   As picture 5 ignore the content of the page and tap Next. As picture 6 Ignore the content of the page and click Next
   As picture 7 tick confirm the indicator is blimking click Next

4. Enter Wi-Fi information
   Enter the name and password of the 2.4Ghz Wi-Fi (please make sure that the Wi-Fi name and password contain only numbers and letters and not special symbols) Follow the prompts to the next step,you can see the device is being added,and after a few seconds,you will see that the device is added successfully (the length of time will depend on the strength of the wifi signal).

5. Display of temperature controller APP interface

If you encounter any problems during the use of the product, please feel free to contact us through the purchase platform, we will try our best to help you.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>