BEOK CONTROLS WiFI-EP WiFi Thermostat User Guide

BEOK CONTROLS WiFI-EP WiFi Thermostat

Product Information

Specifications

• Model: 313 WIFI Thermostat
• Power Supply: 200-240Vac
• Max Load: 16A for electrical floor heating, 3A for water floor heating
• Temperature Range: 5-60°C
• Temperature Control Range: 5-99°C
• Temperature Accuracy: 0.5°C
• Power Consumption: 0.15W
• Sensor Type: NTC
• Quantity: 1 unit

Product Usage Instructions

1. Ensure the thermostat is properly installed and connected to the power supply.
2. Download and install the corresponding app on your phone (IOS or Android).
3. Open the app and follow the on-screen instructions to connect the thermostat to your phone via WiFi.
4. You can now control the temperature settings of the thermostat remotely using your phone.
5. Set the desired temperature range for your industrial, commercial, or domestic room.
6. You can also use the thermostat to control heating appliances, especially floor heating systems.

Frequently Asked Questions (FAQ)

1. Q: Can I control the thermostat using both IOS and Android phones?
   A: Yes, the WiFi thermostat is compatible with both IOS and Android systems, allowing you to control it with either type of phone.

2. Q: What is the power consumption of the thermostat?
   A: The thermostat has a power consumption of 0.15W, ensuring energy efficiency during operation.

3. Q: What is the temperature accuracy of the thermostat?
   A: The temperature accuracy of the thermostat is 0.5°C, providing precise temperature control for your space.

Product Summary:
WiFi thermostat can be controlled by phone. It is applied to temperature control of industrial, commercial and domestic room , and start of control heating appliances, especially floor heating systems. It can be controlled by phone. Phone systems are lOS and Android system optional.

Technical Parameter

Main Button Instruction
ON/OFF Switch;
M Mode Button: Switch between manual mode and program mode Long press to enter period setting.
Time set: Hour, minute and week setting.
Up button: To increase temperature.
Down button: To reduce temperature.

User Interface Explanation (Thermostat Port)

User Interface Explanation (Phone Port)

Model Spec

VIl.Wiring Diagram

TOL313WIFI-WPB
Please connect L and N to 220 voltage power, 5 and 6 to your gas boiler. 1 and 2 are for thermal actuators, please do not connect them to your gas boiler.
Remarks: please read wiring diagram carefully before connecting. If you connect it wrongly, there will be a short circuit. Your gas boiler board will be damaged!!!

Thermostat Operation Instruction

Setting the Programmable Mode.

Press and hold M into programmable mode. LOOP and 12345 will display.
Press to select the control way: 5+2 or 6+1 or 7 days programmable.
12345 display in the position of week means 5+2;
123456 display in the position of week means 6+1;
1234567 display in the position of week means 7 days programmable.
Press M to select the periods.
Press to change the temperature;
Press  to do time adjustment.
Press to change the time;
Press M again to select the weekend’s temp. If you want to make temporary adjustment in any period press M then . will flash. When finish the setting, all will confirm automatically.
Press M to switch operation between manual mode and programmable mode.

Remark:

1.  The defaulted temperature of period3 and period4 is the same as period2. Please change it according to the request.

Advanced Setting

In the state of power-off, long press and hold then press    into advanced setting mode. Then press M to set relative item.

For Opt:
When the thermostat connect with gas boiler, the terminal short circuit is extinguished, the open circuit is ignition. Then Turn to the reverse output ’01’.
When the Opt is adjusted to 00, thermostat can also be used in the water floor heating system, the water temperature is too low will prohibit the output (relay output 3A/200W), this function only suits for wifi linkage function thermostat.

DFI:
Explanation:
For example, If Room temp is 22°C, Hysteresis’DFI’=1.

when room temp rise to 23°C, the relay will stop outputting;
when room temp down to 21 C, the relay will output again and start heating.
DFT is hysteresis for room temp, factory set is 1,if 1 is too big for you, it can be adjusted to 0.5.

Phone Port Operation Instruction

Install APP on phone
For iOS system: Login in App Store, search ” Beok Home” , you can download it on your iphone.

Or scan below code to download:

For Android System: Login in Google Play, search”Beok Home”, you can download it on your phone.

Or scan below code to download:

Connection Thermostat with Phone
Thermostat Setting

Press up “ ” Hold on for 10 seconds

During the configuration process the WIFI icon flashes briefly to start the configuration network Valid for 2 minutes At this time, wifi symbol will be twinkling quickly and frequently. It means, you can connect thermostat with phone now. When wifi symbol stop twinkling, it means thermostat is successfully connected with phone.

Connection with Phone
Open ” Beok Home” APP on your phone, you can see APP welcome page.
Enter your wifi name and password, then start connection at below. When connection success, it will appear “Connection Success”.

After connection success, you need press “Search” key.

Then it will appear your wifi thermostat HVAC. HVAC is the factory setting name, whe want have more than 2 thermostats, you can change it to any name you want.

• Long press HVAC for 5 seconds, it will appear Edit Thermostat page.
• Press Modify Current Thermostat.
• You can change HVAC to room 1, Bedroom Bath room, or anything you like.

APP Interface on the Phone

Thermostat Setting through Phone Operation

Touch work loop: you can choose the week program mode: 5+2/6+1/7. Touch each time value: you can set the time of the period. Touch each temperature: you can set the temperature of the period.
Notice: When you choose the program mode to 7, Weekend program data set will no appear.

• 6. Advanced Setting: Long Press Senior  , you will go into Advanced Senior setting mode:

• 7. Switch of Manual mode and Auto mode: Press  to switch manual mode or Auto mode.

• 8. Power off : Press to turn on or off thermostat.

Attention to Phone WiFi Connection

1. After you press Configure, if connection fails:
   • Please confirm your mobile phone is set to WLAN mode, and ensure its (mobile data)3g/4g is turned off. Please connect to 2.4G wifi, not 5G wifi.
   • Please add your wifi router name, we recommend it does not include spaces or Chinese symbol.
   • Please check your wifi router password. We recommend not over 32 characters, no spaces, no blank password , no special symbols except letters and numbers.
   • AP config: AP thermostat hotspot configuration (operate FAC=12 in advanced settings).
   • Please confirm wifi password is correctly filled. We recommend you check password to be visible when it is input.
2. If it displays the following reminder, please go to Advanced Setting to reset corresponding setting.

Installation Instruction

This product is suitable for standard 80*80mm wall box and 60 mm european round box.

1. Open the main control board as shown in the figure, press the power part of the thermostat, gently lift it up, and separate it from the mounting board hook.
2. Connect the wires correctly according to the wiring diagram and secure the rear cover to the mounting plate with M4 screws
3. Connect the lower cover cable to the upper cover.
4. Insert the back into the four hooks of the mounting plate. Gently press down on the thermostat to lock the front housing and complete installation

NOTICE: The installation wire should be 1.5-2.5mm2.

XII. ATT:
Thank you for buying this product! Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.

In the box you will find:

Our Service:
We offer the warranty of 24 months from the sales day.
During the warranty, if it is belong to the quality issue, we will fix or replace them for you by free after test them.
If it is not quality problem or beyond the warranty time, we will charge for the after sales service.

Warning:
The symbol means the unit is being installed, it may cause electrical shock hazard during maintaining, so please make sure it is operated by the professional technical worker.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>