SENCOR SDA 512 Digital TV Outdoor Antenna User Manual

September 4, 2024
SENCOR

SENCOR SDA 512 Digital TV Outdoor Antenna

IMPORTANT SAFETY INSTRUCTIONS

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED“DANGEROUS VOLTAGE“ WITHIN THE UNIT´S CABINET THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE MANUAL ACCOMPANYINGTHE UNIT.
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACEDTHE APPARATUS.
THE APLIANCE COUPLER IS USED AS THE DISCONNECT DEVICE, THE DISCONNECT DEVICE SHALL REMAIN READILY OPERABLE.
ALWAYS REMEMBER TO REMOVE THE PLUG FROM THE MAINS SOCKET BEFORE DISCONNECTING THE POWER LEAD FROM THE BACK OF THE UNIT.
DO NOT PLACE NAKED FLAME SOURCES, SUCH AS CANDLES, ON THE TOP.

WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. NEVER ATTEMPT TO OPEN THE CABINET. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.

Suitable for outdoor use. Super quality reception for digital terrestrial signals (DVB-T) and radio programs (DAB radio programs) as well as FM radio signals.
Built in low noise and high gain circuit.
Gain control
Dual output
Easy to install and operate
Input voltage (AC110 – 120V or AC220 – 240V)
Working voltage (DC 5.0V / 0.55A / 2.75W)
Integrated 5G (LTE) Filter
Reception frequency: VHF: 47 – 230MHz, UHF: 470 – 694 MHz Gain: VHF: 12 dB / UHF: 12 dB

Note:
Do not use while thunderstorm and turn o the power.
If you do not use the device or you are not using it for a long time, turn o the device and unplug from power outlet.
If reception is not sufficient enough using this device, relocate the antenna to suitable place.

  1. Mounting bracket installation
    Attach mounting bracket to the antenna
    (see Fig. 1 ) using the two screws and tighten firmly
    Fig. 1

  2. Antenna installation
    Loose the wing nuts, put the mast between mounting bracket, then tighten the wing nuts. Fig. 2

  3. F–Connector installation
    (1) Thread the coaxial cable through waterproof cap
    (2) Snip o 10mm from the cover of coaxial cable
    (3) Fold back the braid and snip o 8mm foaming core of coaxial cable.
    (4) Thread the coaxial cable through F-type male plug.
    (5) Now finish installation

  4. Connect the F-type male plug to F-type female plug of antenna and then cover waterproof cap.

Connection and Usage

Connect the signal cable from the antenna to the signal input jack of the power supply, connect the power supply output jack to the digital receiver, plug the power adaptor with the power supply and connect to power socket, and finally join the TV and the digital receiver.

Connect the signal cable from the antenna to the signal input jack of the power supply, connect the power supply output jack to the TV, plug the power adaptor with the power supply and connect to power socket.

Connect the signal cable from the antenna to the signal input jack of the power supply, connect the power supply output jack to the TV, plug the power adaptor with the power supply and connect to power socket.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS
Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.
For business entities IN the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.

Hereby, FAST ČR, a.s. declares that the radio equipment type SDA 512 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.sencor.eu

Changes to the text, design and technical fisci cations may occur without prior notice and we reserve the right to make these changes.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals