KONCAR UPO708DM Built in Oven Owner’s Manual

KONCAR UPO708DM Built-in Oven

SPECIFICATIONS

• Model : UP0708DM
• Usable Volume : 68L
• Rated voltage : 220-240V~
• Rated frequency : 50Hz-60Hz
• Electric power : 2.1 kW

Product Information

The UPO708DM is a built-in oven designed for installation in kitchen cabinets. It comes with various safety features and is suitable for indoor use only. The oven heats up quickly and evenly for efficient cooking.

Product Usage Instructions

Safety Instructions:

1. During the first use, it is normal to experience some smoke and odor. Wait until the odor dissipates before placing food in the oven.
2. Operate the product only in a well-ventilated room.
3. Avoid touching hot surfaces during and after use.

Installation:
For installation in a tall kitchen cabinet:

• Ensure minimum ventilation space around the oven.
• Follow the specified dimensions for the cabinet cutout.

Regular Use:

1. Avoid opening the oven door frequently during cooking.
2. Always supervise children around the oven, especially when the grill function is in use.

Cleaning and Maintenance:
Regularly clean the oven according to the instructions provided in the manual. Ensure the oven is cool before cleaning to prevent burns.

IMPORTANT SAFETY INSTRUCTIONS

THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY. PLEASE READ THEM CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE.
To maintain the EFFICIENCY and SAFETY of this appliance, we recommend:

• Call only the Service Centers authorized by the store where you buy the cooker
• Always use original Spare Parts

1. When the oven is first switched on, it may give off an unpleasant smell. This is due to the bonding agent used for the insulating panels within the oven. Please run the new empty product with the conventional cooking function, 250°C, for 90 minutes to clean oil impurities inside the cavity.
2. During the first use, it is completely normal that there will be slight smoke and door. If it does occur, you should wait for the smell to be cleared before putting food into the oven.
3. Please use the product in an open environment.
4. The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Chil-dren less than 8 years of age shall be kept away unless continu-ously supervised.
5. If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
6. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appli-ance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
7. During use, the appliance becomes very hot. Care should be taken to avoid touching heating elements inside the oven.
8. Do not allow children to go near the oven when it is operating, especially when the grill is on.
9. Ensure that the appliance is switched off before replacing the oven lamp to avoid the possibility of electric shock.
10. The means for disconnection must be incorporated in the fixed wiring by the wiring specifications.
11. Children should be supervised to ensure that they do not play with the appliance.
12. This appliance is not intended for use by persons (including chil-dren) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
13. Accessible parts may become hot during use. Young children should be kept away.
14. An all-pole disconnection means must be incorporated in the fixed wiring by the wiring rules.
15. If the supply cord is damaged, it must be replaced by the manu-facturer, its service agent, or similarly qualified persons to avoid a hazard.
16. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in the shattering of the glass.
17. Only use the temperature probe recommended for this oven.
18. A steam cleaner is not to be used.
19. The appliance is not intended to be operated using an external timer or a separate remote control system.
20. The instructions for ovens that have shelves shall include details indicating the correct installation of the shelves.
21. Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet hands or feet.
22. For oven: The oven door should not be opened often during the cooking period.
23. The appliance must be installed by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement, and installation by unauthorized personnel.
24. When the door or drawer of the oven is open do not leave anything on it, or you may unbalance your appliance or break the door.
25. Some parts of the appliance may keep its heat for a long time; it is required to wait for it to cool down before touching onto the points that are exposed to the heat directly.
26. If you will not use the appliance for a long time, it is advised to plug it off.

DECLARATION OF COMPLIANCE
When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it: contact a professionally qualified person. Keep packing materials such as plastic bags, polystyrene, or nails out of the reach of children because these are dangerous to children.

PRODUCT INSTALLATION

If there is any discrepancy between the illustration and the actual product, please refer to the actual product.
Cabinet Diagram (Standing Cabinet)

1. The thickness of the cabinet board is 20 mm.
2. If the power socket is installed on the back of the appliance, the depth of the cabinet opening shall be increased from a minimum of 590 mm to 620 mm.
3. The dimensions in the figures are in mm.

Cabinet Diagram (Ground Cabinet)

If the appliance is installed under the hob, the minimum thickness of worktop A is shown below:

1. The thickness of the cabinet board is 20 mm.
2. If the power socket is installed on the back of the appliance, the depth of the cabinet opening shall be increased from a minimum of 590 mm to 620 mm.
3. The dimensions in the figures are in mm.

Installation Important Instructions

Content that means [Mandatory]

• The safe operation of this appliance can only be guaranteed if it has been installed to a professional standard by these installation instructions. The installer shall be liable for any damage resulting from incorrect installation.
• The entire installation process requires two professional installers. Wear dry protective gloves during installation to avoid scratches or electric shock.
• Fitted units must be heat-resistant up to 90°C, and adjacent unit fronts up to 70°C.
• Please use a 16A socket.

Content that means [prohibit ]

• Do not install the appliance behind a decorative door or the door of a kitchen unit, as this may cause the appliance to overheat.
• Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transit.
• Do not block the vent of the appliance and the gap between the cabinet and the appliance.
• Use extreme caution when moving or installing the appliance. It is very heavy, do not lift the appliance by the door handle.
• If the power cord or power plug is damaged, stop using the appliance immediately, to avoid fire, electric shock, or other injuries.

Content that means [note]

• Be very careful when moving or installing the appliance to avoid damage to the appliance or damage to the cabinets.
• Before starting up the appliance, remove all packaging materials and accessories from the cavity.
• The power socket shall be accessible to users (such as next to the cabinet) for easy power-off.
• After installation is complete, make sure that the power plug is firmly inserted into the socket.
• Please refer to the “Cabinet Diagram” for the requirements of net depth of the cabinet. The clearance between the cabinet bottom board and the rear board (or wall) shall not be less than 50 mm.

Installation steps

1. Please customize the cabinet according to the “Cabinet Diagram”.
2. Before installation, please check for normal power sockets and appropriate grounding, and check whether the cabinet dimension meets the installation requirements.
3. Place the appliance in designated locations in the kitchen, install it in a vertical cabinet, and connect the power supply.
4. To locate the mounting fixing holes, open the appliance door and look at the side frame of the appliance(position shown above).
5. Fix the appliance to the cabinet with two rubber plugs A and screws B provided with the appliance.

PRODUCT INTRODUCTION

Oven
When removing food, please wear heat-insulating gloves to prevent burns!
At the moment of opening the door of the furnace, pay attention to the steam. Please open the door at a small angle to avoid the steam on your face.

Accessories

Accessories used (Only for some models)
For the oven to work properly, the grill rack and Grill tray should only be placed between the first and fifth levels. When used together, place the Grill tray under the grill rack.

Control Panel

• Turn knob K1 to select the cooking function.
• Turn knob K2 to adjust the time.
• Turn knob K3 to adjust the temperature.

Before using it for the first time

1. The oven must not be operated until it has been correctly installed.
2. To avoid fire, remove all transport protection materials and ensure that the oven is free of residual packaging items and accessories (e.g. foam, cardboard, grill tray, grill rack, etc.).
3. Clean the oven cavity and accessories with soapy water and a soft cloth.
4. Open kitchen windows and cooker hoods to maintain high ventilation.
5. Do not let children or pets into the kitchen and close the doors of adjacent rooms.
6. After connecting the power, activate the oven mode, time, and temperature in the table below to remove odors in the cavity.
7. After the first use, please open the oven door at a small angle and wait for the cooling to complete.

Regular operation

1. Turn knob K1 to select the cooking function.
2. Turn knob K2 to adjust the time.
3. Turn knob K3 to adjust the temperature.
4. When cooking is finished, turn all knobs to the “  position.

CLEANING AND MAINTENANCE

Cleaning
Disconnect the power supply before cleaning and maintenance. To ensure the life of the oven, clean it in time after cooking.

The cleaning steps are as follows:

1. After cooking, wait for the oven to cool completely.
2. Remove oven accessories, rinse with warm water, and dry.
3. Remove food residues and oil stains from the oven cavity.
4. Clean the oven surface with a soft cloth dampened with detergent and dry.
5. Start the water clean function as follows:
6. Add about 250 ml of purified water and an appropriate amount of dish soap to the cavity and stir well.
7. With the oven door closed, turn Knob 1 to the “  position.
8. Turn knob K2 to the “30 minutes” position.
9. Turn knob K3 to the “100°C” position.
10. After the water clean function is completed, wait for the oven to cool completely. Then dry the furnace oven cavity with a clean absorbent sponge or soft cloth.

NOTES

• Do not use sharp cleaning tools, hard brushes, and corrosive cleaning products, so as not to damage the oven and its accessories.
• Do not use a rough scrubbing agent or a sharp metal spatula to clean the door glass.

Lamp Replacement

1. Switch off and disconnect the power from the oven. Ensure that the internal parts are cool before touching the internal parts.
2. Remove the lamp cover by turning it counter-clockwise (note, that it may be stiff), and replace the bulb with a new one of the same type.
3. Insert the new bulb, which should be resistant to 300°C. For replacement bulbs contact your local service center.
4. If in any doubt, consult a qualified electrician for help.

Warning
To avoid electric shocks-please ensure that the electricity supply to the appliance is switched off and the appliance is fully cold. before removing the lamp lens.

TROUBLESHOOTING

If the problem cannot be solved or other problems occur, please contact the after-sales service.

Unable to start

| Power is not connected| connect power supply
The main power switch is not turned on| Turn on the power switch
The oven door is not closed| Close the oven door
the lamp does not come on| It’s broken| Contact after-sales service
Has a pungent odor or smoke| first use| No processing required

Food is not cooked

| Temperature is too low| Use a higher temperature
The food portion is too large| Cook food in smaller pieces or extend the cooking time.

Burnt or uneven food

| The temperature is set too high or the heating time is too long| Adjust the cooking temperature or time
The food is too close to the heating tube| Adjust the placement layers of accessories
The fan did not stop working after stopping the heating| Fan delays blowing for heat dissipation| No processing required

PRODUCT RECYCLING

This symbol on the product or instruction manual indicates that your device should be disposed of separately from your household waste at the end of its useful life. There is a separate recycling system locally for recycling. For more information, please contact the local authority or retailer where you purchased the product.

When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it: contact a professionally qualified person. Keep packing materials such as plastic bags, poly tires, or nails out of the reach of children because these are dangerous to children.

KONČAR – KUĆANSKI APARATI d.d. Slavonska avenija 16 , 10001 Zagreb , Hrvatska tel : ++ 385 1/2484 555 fax : ++ 385 1/2404 102  www.koncar- ka.hr

FAQ’s

Q: What should I do if there is smoke during the first use?
A: It is normal to experience some smoke during the initial use. Wait for the odor to dissipate before using the oven for cooking.

Q: How often should I clean the oven?
A: It is recommended to clean the oven regularly, especially after spills or heavy use. Refer to the manual for detailed cleaning instructions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>