HYT T1 Series Smart Watch Instruction Manual
- September 2, 2024
- HYT
Table of Contents
- T1 Series Smart Watch
- Product Information
- Specifications:
- Product Usage Instructions:
- Precautions for Use:
- Quick Guide:
- Winding:
- Setting the Time:
- Setting the Time Counter Clockwise:
- Power Reserve Indicator:
- Display Examples:
- Q: What is the warranty period for the HYT watch?
- Q: Can I repair the watch at any service center?
T1 Series Smart Watch
“`html
Product Information
Specifications:
-
Brand: HYT
-
Model: T1 Series
-
Technology: Kairos Technology Switzerland (KTS) SA
-
Material: Highly resistant and flexible alloy, top-quality
glass -
Warranty: 5 years for manufacturing defects
Product Usage Instructions:
Precautions for Use:
Before using the watch, ensure you read and understand the
manual thoroughly.
Quick Guide:
Refer to page 5 of the manual for a quick guide on using the
watch.
Winding:
Follow the instructions on page 6 for winding the watch.
Setting the Time:
To set the time, follow the steps outlined on page 7 of the
manual.
Setting the Time Counter Clockwise:
If you need to set the time counter-clockwise, refer to page 8
for detailed instructions.
Power Reserve Indicator:
The watch features a power reserve indicator. Page 9 of the
manual provides information on this feature.
Display Examples:
For different display examples, check page 8 of the manual.
FAQ:
Q: What is the warranty period for the HYT watch?
A: The warranty is valid for 5 years from the date of purchase
if bought from an approved HYT dealer. It does not cover damage due
to misuse.
Q: Can I repair the watch at any service center?
A: For any service, repair, or maintenance work, only use
dealers approved by HYT or their customer service department.
Repairs by unauthorized parties void the warranty.
“`
INSTRUCTION MANUAL AND WARRANTY
T1 SERIES
TABLE OF CONTENT
GLOSSARY
p.2
WARRANTY
p.3
PRECAUTIONS FOR USE
p.4
QUICK GUIDE
p.5
WINDING
p.6
SETTING THE TIME
p.7
SETTING THE TIME COUNTER CLOCKWISE
p.8
DISPLAY EXAMPLES
p.8
POWER RESERVE
p.9
INDICATOR
1
HYTWATCHES.COM
KAIROS TECHNOLOGY SWITZERLAND (KTS) SA – PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND – CONTACT@HYTWATCHES.COM – OFFICE +41 32 552 55 58
GLOSSARY
Bellows: The bellows are the two reservoirs located at 6 o’clock. They are
made of a highly esistant and flexible alloy, which is four times f iner than
a human hair. The movement compresses the left bellow which is emptied of its
coloured liquid. The other bellow then fills up, and vice versa, moving the
liquid in the capillary, and with it the meniscus that shows the time.
Capillary: This tube, made f rom top quality glass, such as is used in the
medical industry, is circular and contains two immiscible liquids. A surface
treatment is applied to the inside of the capillary, which allows the two
liquids to move without adhering to the glass.
Fluid module: To create a liquid time indicator that is compact and wearable,
HYT has developed a completely new hi-tech concept, using two flexible bellows
at each end of a capillary tube. The system is sealed in accordance with the
strictest standards applied in the aerospace industry, with each bellow
containing immiscible liquids. The exclusive patented fluid module represents
this complete system. Protected by seven patents, this invention was honored
by the Grand Prix d’Horlogerie de Genève, which awarded it the Innovation
Prize in 2012.
Meniscus: The two liquids are separated by their intrinsic repulsive
properties. The meniscus marks the separation surface of the liquids in the
tube, showing the time.
Rewind: When the coloured liquid gets to 6 o’clock (zone II), it goes into
rewind mode and flows back to its original position (zone I).
2
HYTWATCHES.COM
KAIROS TECHNOLOGY SWITZERLAND (KTS) SA – PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND – CONTACT@HYTWATCHES.COM – OFFICE +41 32 552 55 58
WARRANTY
In this manual, you will find basic instructions for the use and maintenance
of your watch.
Each HYT watch has an individual identification number, which guarantees both
its authenticity and the fact that all work related to its creation was
supervised by a master watchmaker [sic].
Each HYT watch has a fluid module1. This mechanism allows the time to be
displayed through a meniscus. The meniscus marks the limit between the two
immiscible fluids in the capillary. The movement of the watch drives the
module through the bellow set on the main plate. Only a professional
watchmaker approved by HYT can replace this fluid system. It also has a unique
serial number.
On the card you received when you purchased your watch is a QR code that gives
you access to this document which serves as a warranty certificate for your
HYT watch.
The warranty is activated when you purchase from our network of HYT approved
dealers.
You must show your warranty card to be eligible to use the warranty for any
repairs or checks.
Your HYT watch is guaranteed against any manufacturing defect for f ive years
as of the date of purchase, if the watch was bought from an approved HYT
dealer. Nonetheless, this warranty does not cover damage caused by incorrect
handling or use of the watch.
For any service, repair or maintenance work, please make sure that you only
use dealers approved by HYT or our customer service department. You will f ind
the list of our network of approved dealers on our website www.hytwatches.com.
Any repair or maintenance work carried out by third parties not approved by
HYT automatically voids the warranty. The damage caused must then be repaired
at your expense.
3
HYTWATCHES.COM
KAIROS TECHNOLOGY SWITZERLAND (KTS) SA – PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND – CONTACT@HYTWATCHES.COM – OFFICE +41 32 552 55 58
PRECAUTIONS FOR USE
Your HYT watch is set and ready to wear.
The time is displayed with two liquids. One is coloured and the other is
transparent. One shows the time that has passed, while the other liquid shows
the time to come. Their meeting point is a meniscus in the capillary, i.e. the
time now.
Zone I
AB Zone II
Important: if you do not intend to wear the watch for some time, the coloured
liquid must be kept in its own Below (left piston).
To do this, unscrew the cron (A’) and pull it into position B, and turn it to
put the time forward to 06:15. Then turn it in the reverse direction to go
back to 06:00 precisely. You will note at that moment that the coloured liquid
goes into return mode up to its original position and the transparent liquid
takes its place.
Once the winding stage is finished (coloured liquid in «Zone I»), make sure
the crown remains in time-setting position B. Your watch can now be stored for
a long period.
It is normal to find that a little of the coloured liquid remains visible in
«Zone I».
Manufactured and tested applying very strict standards, the components of your
HYT watch form an airtight assembly. To ensure that it maintains these
properties, we recommend that you have the seals replaced during an inspection
by an approved dealer. Variations in temperature, humidity, perspiration or
repeated impacts can affect its water resistance over the years. We advise you
carry out an inspection every 5 years.
With its waterproof casing, your HYT watch is completely washable. It must be
cleaned regularly using warm soapy water, rinsed and then carefully dried with
a soft cloth.
Following exposure to sea water, rinse your HYT watch in fresh water. Make
sure you do not expose your watch to temperatures above 50°C (122°F) for too
long.
4
HYTWATCHES.COM
KAIROS TECHNOLOGY SWITZERLAND (KTS) SA – PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND – CONTACT@HYTWATCHES.COM – OFFICE +41 32 552 55 58
QUICK GUIDE
1
3
1. Time display by module
fluidic retro hours
2. Minutes display hand
A’ B A
3. Power reserve display (100% = 72 hours)
4. Crown settings 2
positions:
Pos A: screwed
4
Pos A’: winding
(unscrewed)
2
Pos B: time setting
(pulled out)
5
5. Unclip the strap (back side)
5
HYTWATCHES.COM
KAIROS TECHNOLOGY SWITZERLAND (KTS) SA – PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND – CONTACT@HYTWATCHES.COM – OFFICE +41 32 552 55 58
WINDING Pos. A
A A’
INTRODUCTION This function ensures that the power necessary to operate your
watch is stored by the movement. HOW TO USE Unscrew the crown and wind the
watch by turning it clockwise as in «A’».
6
HYTWATCHES.COM
KAIROS TECHNOLOGY SWITZERLAND (KTS) SA – PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND – CONTACT@HYTWATCHES.COM – OFFICE +41 32 552 55 58
SETTING THE TIME Pos. B
Turning the crown once is the equivalent of a change of around 15 minutes.
B
INTRODUCTION
This function allows the time shown on your watch to be set using the crown.
IMPORTANT
· The microfluids in the capillary move with the gentle rotation of the crown. · It is recommended that the fluid is moved by only 15 minutes by touching the crown.
HOW TO USE
· Unscrew the crown and pull it out to position «B». · Then turn the crown in
either direction until the coloured liquid (hour display)
and the minute hand are at the time required.
REWIND
The automatic return of the coloured liquid (rewind) is allowed by the pressure of the two bellows. It can take up to 1 minute for it to return f rom zone 2 to zone 1. It is strongly advised that you wait for the coloured liquid to return completely to zone 1 before you continue to set the time.
Zone I
Zone II
7
HYTWATCHES.COM
KAIROS TECHNOLOGY SWITZERLAND (KTS) SA – PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND – CONTACT@HYTWATCHES.COM – OFFICE +41 32 552 55 58
SETTING THE TIME COUNTER CLOCKWISE
IMPORTANT When the coloured liquid is in zone 1, do not correct the time in
the direction opposite to the watch hands.
Zone I
DISPLAY TIME EXAMPLES
Zone II
-
6:00
-
10:35
-
5:50
8
HYTWATCHES.COM
KAIROS TECHNOLOGY SWITZERLAND (KTS) SA – PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND – CONTACT@HYTWATCHES.COM – OFFICE +41 32 552 55 58
POWER RESERVE INDICATOR
A’
EMPTY
FULL (100% = 72 hours of power reserve)
INTRODUCTION
The display uses a small hand on the dial which moves in a circular arc from
the «full» (thick) indicator to the «empty» (thin) indicator.
HOW TO USE
· Full indicator · (72 hours’ power reserve). · To ensure optimal operation of
the watch, we recommend that you check it is fully wound
(see WINDING).
9
HYTWATCHES.COM
KAIROS TECHNOLOGY SWITZERLAND (KTS) SA – PREBARREAU 17 | 2000 NEUCHATEL | SWITZERLAND – CONTACT@HYTWATCHES.COM – OFFICE +41 32 552 55 58
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>