Cablematic ve11600-01 Stand Fan Pedestal Fan Instruction Manual
- September 2, 2024
- CABLEMATIC
Table of Contents
Cablematic ve11600-01 Stand Fan Pedestal Fan
Product Specifications
- Power: 60W
- Safety Features: Safety grill, Silent operation, Non-slip feet
Product Usage Instructions
- Read the manual carefully before using the device.
- Do not allow children to play with the device.
- Disconnect the device from the power outlet before cleaning.
- Always operate and mount the device on a firm and stable surface.
- Secure the base using the provided safety screws.
- Adjust the height of the stand fan as desired.
- Protect the device from dust, moisture, sunlight, and direct heat.
- If not in use for an extended period, unplug the fan from the power outlet.
- Do not attempt to disassemble the motor housing.
FAQ
- Q: Can children use this stand fan?
- A: This appliance can be used by children aged 8 years and above under appropriate supervision.
- Q: What should I do if the fan is not in use for a long time?
- A: If not using the fan for an extended period, unplug it from the power outlet.
- Q: How many speed settings are available on this fan?
- A: The fan offers variable speed settings for personalized comfort.
INSTRUCTION MANUAL
Read this manual carefully before using the device and save it for future
reference. To reduce the possible risk of fire, electric shock or personal
injury, keep in mind the following instructions:
GENERAL INFORMATION
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given appropriate supervision or training concerning use of the appliance in a safe and They understand the dangers involved. Children must not play with the appliance. Cleaning and maintenance to be carried out by the user must not be carried out by children without supervision. Before operating this appliance, read the following instructions. Keep the manual in a safe place so you can consult it at any time.
- If the power cord is damaged, it must be replaced by the manufacturer or by a qualified technician to avoid the risk of electric shock.
- After removing the packaging, check that the appliance is in good condition, and if you have any questions, do not turn it on.
- Contact your distributor or seller for the return of the appliance.
- This device is packed for protection against any damage or damage that may be caused by transportation.
- The packaging is made up of plastics and other materials that can be dangerous. Keep out of reach of children. These materials are recyclable and must be delivered in a unit of the appropriate recycling, respecting the environmental laws.
- This appliance has been designed for DOMESTIC USE only and must not be used with any other appliance, such for example in a commercial, industrial or any other non-residential installation.
- Do not handle the appliance with wet hands and do not immerse it in water or any other liquid.
- Unplug the appliance from the mains before cleaning it.
- Do not continue using the appliance if you notice that it is not working properly. Turn it off immediately and look for the manufacturer or an authorized technical service so that a qualified technician can evaluate the damage and repair it if necessary.
- Turn off the appliance and disconnect the power cord from the power outlet before replacing any part or accessory, or before touching the moving parts of the device.
IMPORTANT SAFETY INSTRUCTIONS
- Connect the device only to an AC power source. The voltage indicated on the rating plate that is on the device, must match the voltage of the power supply.
- Always disconnect the appliance from the socket after use, to disassemble or clean it.
- Always mount and use the appliance on a stable and secure surface.
- Never place the appliance on or near heat sources, such as a gas / electric stove or inside a hot oven. Keep the power cord away from these sources of heat or sharp objects.
- Never handle the power cord with wet hands.
- The use of accessories or parts not recommended by the manufacturer may cause a fire, an electric shock or serious injuries.
- This device is manufactured to be used indoors. Never use it outdoors or in outside parts of the house.
FEATURES
- Power: 60W
- Speeds: 3 levels
- Fixed or oscillating position
- security grill
- Blade diameter: 40cm
- Adjustable height
- Silent / Anti-slip
FAN PARTS
- Front grille
- Grid Circle
- Blade holder nut
- fan blade
- Grid support nut
- Rear rack
- Driveshaft
- Engine mounting.
- Control set
- fixing screw
- inner tube
- Height adjustment screw
- Outer tube
- Foundation
- Foundation Board
- Base security screw
ASSEMBLY INSTRUCTIONS
- Remove all packaging carefully, and avoid scratching plastic covers with scissors or knives.
- Assemble the base of the fan, joining it to the lower telescopic tube.
- Place on the motor shaft following the following order: the rear part of the grille, the propeller, and the front part of the grille using the corresponding nuts and washers to hold the parts together as shown in the upper diagram.
- To fix both grids use the ring, and fix it with the security screw.
- Finally, insert the part of the propeller with the motor into the tube of the telescope and then use the fixing screw to hold it all together.
- HEIGHT ADJUSTMENT: Loosen the union thread to insert the body, once you have defined the desired height, retighten said thread to fix the position.
RUNNING
ON/OFF
- The on/off button, first press this button, and the fan will turn on. Press again and the fan will stop to function.
SPEED
- By pressing this button, the fan will start at a low speed (speed 1) and the lights will turn on indicating said speed.
- Repeatedly press the button and the speed will increase, passing by a “1-2-3” order cycle, at the same time, the control panel, will show the light according to the selected speed.
MODE
- There are three modes of air movement: Normal, Natural, and Sleep. Select the one that best suits your taste using the MODE button.
- On the control panel, you can see which MODE has been activated.
TIMER
- With the timer, you can program a specific time of operation.
- It has four times, 0.5, 1, 2, and 4 hours.
- On the control panel, you can see what TIME you have programmed.
SWING
-
By pressing this button, the fan will oscillate to the right. to the left, and vice versa.
-
To stop the fan in a specific direction, you have to turn it again. press the same SWING button.
IMPORTANT NOTES
- Place the fan on a flat, dry surface.
- Before connecting the device to the network, make sure that the switch is in the “0” position.
- Plug the power cord into the power outlet 220-240V~50Hz
- If you do not use the fan for a long time, unplug the cord from the power outlet.
- Never try to dismantle the device where the motor is located.
- If you notice any abnormalities (such as unusual fan noise), turn off the device and unplug it immediately.
- Make sure that no objects or liquids enter the inside of the fan through any openings.
- The fan should only be used in dry environments.
- Protect the device from dust, moisture, sunlight, and direct heat.
CLEANING AND MAINTENANCE
- Make sure the appliance is unplugged before cleaning.
- Clean with a soft, damp cloth, without detergent, aggressive liquids, or solvents.
- Do not immerse the fan in water or any other liquid.
- If the fan is not going to be used for a long period, protect it and store it or after cleaning it, in a dry place.
WASTE
This symbol on the product or in the instructions means that your electrical
and electronic equipment must be disposed of at the end of its useful life in
a specialized container; Do not dispose of it in the usual household waste
container. In the EU there is special waste collection systems for subsequent
recycling. For more information, contact with the local authority or the
retailer from whom you purchased the product.
WARRANTY
EDM guarantees all its products and declines all responsibility for damages caused by improper installation/use of its articles.. This warranty applies only if the instructions for use have been followed, and it is voided if the device has been forced or used improperly, or if it has been repaired by an unauthorized person.
THE INVOICE IS THE PRODUCT WARRANTY
THE MANUFACTURER DECLINES ALL RESPONSIBILITY DUE TO AN INCORRECT INSTALLATION
OF THE APPLIANCE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>