cablematic ve10100-01 Stand Fan Instruction Manual

clematis ve10100-01 Stand Fan

Read this manual carefully before using the device and save it for future reference. To reduce the possible risk of fire, electric shock, or personal injury, keep in mind the following instructions:

GENERAL INFORMATION

• Before operating this appliance, read the following instructions. Keep the manual in a safe place so you can consult it at any time.
• After removing the packaging, check that the appliance is in good condition, and if you have any questions, do not turn it on.
• Contact your distributor or seller for the return of the appliance.
• This device is packed for protection against any damage or damage that may be caused by transportation.
• The packaging is made up of plastics and other materials that can be dangerous. Keep out of reach of children.
• These materials are recyclable and must be delivered in a unit of the appropriate recycling, respecting the environmental laws.
• This appliance has been designed for DOMESTIC USE only and must not be used with any other appliance, such as in a commercial, industrial or any other non-residential installation.
• Do not handle the appliance with wet hands and do not immerse it in water or any other liquid.
• Unplug the appliance from the mains before cleaning it.
• This device is not intended to be used by people (including children) with reduced physical capacities, sensory or mental, or lack of experience and knowledge unless they have received instructions regarding the use of the device or are accompanied by a responsible person.
• Keep the device out of the reach of children under 8 years.
• Children should be supervised during use, to make sure they do not play with the appliance.
• Do not continue using the appliance if you notice that it is not working properly.
• Turn it off immediately and look for the manufacturer or an authorized technical service so that a qualified technician can evaluate the damage and repair it if necessary.
• If the power cord is damaged, it must be replaced by the manufacturer or by a qualified technician to avoid the risk of electric shock.
• Turn off the appliance and disconnect the power cord from the power outlet before replacing any part or accessory, or before touching the moving parts of the device.

IMPORTANT SAFETY INSTRUCTIONS

• Connect the device only to an AC power source. The voltage indicated on the rating plate that is on the device, must match the voltage of the power supply.
• Always disconnect the appliance from the socket after use, to disassemble or clean it.
• Always mount and use the appliance on a stable and secure surface.
• Never place the appliance on or near heat sources, such as a gas / electric stove or inside a hot oven. Keep the power cord away from these sources of heat or sharp objects.
• Never handle the power cord with wet hands.
• The use of accessories or parts not recommended by the manufacturer may cause a fire, an electric shock, or serious injuries.
• This device is manufactured to be used indoors. Never use it outdoors or outside parts of the house.

FEATURES

• Power: 45W
• Speeds: 3 levels
• Fixed or oscillating position
• security grill
• Blade diameter: 40cm
• Heights: min.100 – max.120cm
• Oscillating

FAN PARTS

1. Fan base
2. Plastic cover – union with the base
3. Bar
4. Measurement adjustment thread
5. Interior bar
6. Nut
7. Power switches
8. Connection box
9. Engine cover
10. Oscillation button
11. Axis
12. The base of the lid
13. Nut for the base of the lid
14. Helix
15. Nut for the base of the lid
16. Cover of the grid

ASSEMBLY INSTRUCTIONS

1. Remove all packaging carefully. Avoid scratching the plastic covers with scissors or knives.
2. Mount the bars of the fan base crossing them. Be sure to align the four orifices.
3. Press the four screws from the bottom to the top with the main bar.
4. Insert the plastic trim
5. Put the base of the rear cover of the motor and then use a nut to hold it. Place the propeller on the front axle of the engine and then use the nut to secure it.
6. Cover it with the front protection using the screw to secure it to the base.
7. Insert the completed fan body into the inner tube. And finally, use the nut to lock the body with the fan.

RUNNING

• Through the 3-speed system you can start the fan, this system is designed to give you maximum flexibility. You can also activate the oscillation function using the oscillation slider.
• POSITION 0: OFF position, no button pressed.
• POSITION 1: first gear
• POSITION 2: second gear
• POSITION 3: third gear
• SWING: swing button / set direction (num.10)

IMPORTANT NOTES

• Place the fan on a flat, dry surface.
• Before connecting the device to the network, make sure that the switch is in the “0” position.
• Plug the power cord into the outlet 220-240V ~ 50/60Hz
• If you do not use the fan for a long time, please unplug the power cord from the outlet.
• Never try to disassemble the device where the motor is located.
• If you notice any abnormality (such as unusual fan noise), turn off the device and unplug it immediately.
• Make sure that no objects or liquids enter the interior of the fan through any openings.
• The fan should only be used in dry environments.
• Protect the device from dust, moisture, sunlight, and direct heat.

CLEANING AND MAINTENANCE

• Make sure the appliance is unplugged before cleaning.
• Clean with a soft damp cloth, without detergent, aggressive liquids, or solvents.
• Do not immerse the fan in water or any other liquid.
• If the fan is not going to be used for a long period, protect it and store it, or after cleaning, in a dry place.

WASTE
This symbol on the product or in the instructions means that your electrical and electronic equipment must be disposed of at the end of its useful life in a specialized container; Do not dispose of it in the usual household waste container. In the EU there are special waste collection systems for subsequent recycling. For more information, contact the local authority or the retailer from whom you purchased the product.

THE INVOICE IS THE PRODUCT WARRANTY
THE MANUFACTURER DECLINES ALL RESPONSIBILITY DUE TO AN INCORRECT INSTALLATION OF THE APPLIANCE.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>