BDS1790H 8 Inch Lift Kit with 4 Link Installation Guide

September 2, 2024
BDS

Product Information

This product is designed to optimize the ride height of your
vehicle for improved performance and handling. It is crucial to
measure the distances specified in the pre-installation section for
accurate installation and adjustment.

Specifications

  • Function: Ride height adjustment
  • Compatibility: Universal
  • Material: High-strength steel
  • Color: Black

Product Usage Instructions

Pre-Installation Measurements

Before installing the product, measure the following distances
from the wheel axle center up to the fender lip for each corner of
your vehicle:

  • Left Front: ____
  • Right Front: ____
  • Left Rear: ____
  • Right Rear: ____

These measurements are essential for addressing any ride height
concerns that may arise post-installation. Keep these measurements
ready to provide to Technical Support if needed.

FAQ

Q: What should I do if my vehicle’s ride height is not as

expected after installation?

A: If you encounter any issues with the ride height after
installation, refer to the pre-installation measurements and
compare them with the current settings. If adjustments are needed,
follow the manufacturer’s guidelines for proper adjustment.

Q: Can this product be used on all vehicle models?

A: This product is designed to be compatible with a wide range
of vehicles. However, it is recommended to check the compatibility
with your specific vehicle model before installation.

pre installation
Measure from the WHEEL AXLE CENTER up to the FENDER LIP
Left Front__ Right Front__ Left Rear__ Right Rear___ Left Front__ Right Front__ Left Rear__ Right Rear__
FENDER LIP
WHEEL AXLE CENTER
**These ride heights will be required if you have any ride height concerns after installation. Please be prepared to provide these to Technical Support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals