AJ Madison DM3012POSL Contemporary Vanity with Cabinet Door Installation Guide

DM3012POSL Contemporary Vanity with Cabinet Door

“`html

Product Information

Specifications:

• Wall hung unit height: 850mm (including basin height)
• Drawer operation: Metal drawers with button release
• Hinge adjustment: Vertical, Lateral, Horizontal
• Mirror cabinet and Storage unit distance: 300-400mm from
  basin

Product Usage Instructions

Wall Hung Unit Installation:

1. Measure the distance (L) between each bracket on the unit and
adjust the height (H) as per customer’s request.

2. Secure the unit to the wall using suitable fixings provided
in the box.

3. Ensure the standard height of 850mm (including basin height)
from the floor to the wash basin.

Drawer Operation:

To Remove the metal drawer:

1. Press the button as indicated (Step A).
2. Pull out the drawer in a level position.

To Install the metal drawer:

1. Press the button as indicated (Step A).
2. Push in the drawer in a level position.

Hinge Adjustment:

For Vertical Adjustment:

1. Loosen screw ‘A’ on all hinges.
2. Adjust the door and retighten screw ‘A’.

For Lateral Adjustment:

1. Loosen screw ‘B’.
2. Adjust the door and retighten screw ‘B’.

For Horizontal Adjustment, follow similar steps as for Lateral
Adjustment.

Mirror Cabinet and Storage Unit Installation:

1. Measure the distance (L) and height (H) between each
pre-drilled hole on the products.

2. Fix them using the plug screws with chrome covers provided in
the box.

3. Maintain a distance of 300-400mm between the mirror cabinet
and the basin.

4. Adjust the height of the storage unit as per customer’s
request.

Frequently Asked Questions (FAQ)

Q: How should I secure the wall hung unit to the wall?

A: Use suitable fixings provided in the box and ensure to
measure and adjust the height as needed.

Q: What should I do if the drawer position needs altering?

A: Follow the steps provided for removing and installing the
metal drawer, and adjust as necessary based on Step B or C for
drawer position on the unit.

“`

BATHROOM FURNITURE FITTING GUIDE
Tools required for installations
Note: For safety reasons Unit must be secured to the wall using suitable fixings (pre-drilled holes provide in back panel of unit) When fitting a basin to a unit, a bead of silicone should be applied to the top edge of the basin unit to seal between the basin and unit.

Hinge Adjustment

A – Ve r t i c a l
Loosen screw`A’on all hinges. Adjust door and retighten screw.

B-Lateral
Loosen screw`B’.Adjust door and retighten screw.

C-Horizontal
Loosen screw B’ ½ turn. Turn screwC’until door is positioned correctly and retighten screw`B’.

Drawers Remove/Install
To Remove the metal drawer: press the button as follow Step A, then pull out in level position ; To Install the metal drawer: press the button as follow Step A, then push in in level position Drawer position: if drawer position needs altering follow Step B or C according to the drawer positon on unit.

pull out/lock
A

B

C

Wall hung unit installation.( fixings in box)
Please measure the L distance between each brackets on unit. and H ( height as customers request. The standard height is 850mm (including basin height) from floor to wash basin

1

2

3

2

1

L

L

request hight

4

5

6

!

24h

handle in middle position

Mirror cabinet and Storage unit. ( plug screws with chrome covers in box) Please measure the L&H distance between each pre-drilled holes on products.and fixing them as below steps.the distance will be 300-400 the mirror cabinet to basin as below . the distance from floor to bottom of storage as customer requests.

1

L

2

L

3

1

2

H

H

request hight

4

5

6

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>