Eve Systems 20ECM8301 Eve Energy Outdoor Smart Plug Instruction Manual
- August 31, 2024
- Eve Systems
Table of Contents
Eve Systems 20ECM8301 Eve Energy Outdoor Smart Plug
Safety Instructions
Eve Energy Outdoor may only be connected, installed and commissioned by an authorized electrician. Before installation, ensure the system is disconnected from the power supply!
Max. continuous load: 10 A / 2300 W. Do not connect appliances to this remote controlled socket-outlet if the instruction manual of the appliances prohibits being remote controlled (for example appliances according to EN 60335-2-9 like grills, toasters and similar portable cooking appliances, or portable kitchen appliances, or appliances with heating elements like ovens or heaters, etc.). Do not connect any appliances to this remote controlled socket-outlet which are radiating heat and may cause ignition or burning of surrounding materials (for example radiation heaters, portable heaters, portable floodlights, desk lamps, etc.). Take into consideration that connected appliances might be moved by pets, cleaning staff or other persons who are not aware of the remote control functions.
Meet Eve Energy Outdoor
Get started
Switch off the circuit breaker for your outdoor outlet in your fuse box.
Preparation
Remove your current outdoor outlet, if available.
Install the mounting frame
Eve Energy Outdoor can be wired via the top or bottom.
Position the mounting frame and trace the screw holes.
Remove the mounting frame and drill into your tracings.
Mount the mounting plate using suitable fastening material.
Prepare the wiring
Run the stripped wires through the rubber cap with the embossed membrane.
Wire the power unit
Attach the wires to the corresponding terminals.
Use IEC 61386 compliant conduits with an outer diameter of 13.1±0.2mm.
Attach the power unit
Align the power unit, depending on whether it is wired via the top or bottom. Slide the spare rubber cap over the spare opening of the mounting frame.
Now slide the power unit with the wires and rubber cap with embossed membrane into the mounting frame. Make sure that the rubber cap holding the cables is flush with the mounting frame.
Attach the cover
Slide the cover over the mounting frame and power unit and attach it, using the four screws supplied.
Make sure that the flap opens upwards.
Add Eve Energy Outdoor to the platform of your choice and make sure to have a compatible Thread Border Router.
Learn more at evehome.com/hub
You can also use the button to switch Eve Energy Outdoor on and off.
Enjoy
Monitor energy consumption
Access Eve Energy Outdoor using the Eve app, or the apps or voice assistants
of your preferred platforms.
Feature sets may vary, depending on your platform.
More information at evehome.com/eve-energy-outdoor
Eve is designed to safeguard your privacy. Eve does not harvest your personal
data by forcing you to set up an account or registering your devices. No Eve
cloud or any proprietary technology can ever breach your most personal data.
Learn more at evehome.com/privacy.
Specifications
Input / Output : AC 220-250 V, 50 Hz
Type of load : Resistance & incandescent lamp load
Max. current (peak) : 16 A / 3680 W
Max. continuous load : 10 A / 2300 W
Incandescent Tungsten Lamp Load : Max. 1 A / 240 W
Standby power consumption : 0.15W
Frequency range (BLE) : 2402 – 2480 MHz
Frequency range (Thread) : 2405 – 2480 MHz
Max EIRP : 10 dBm
Ambient temperature : -25°C – 40°C
Dust and water protection : IP44
Pollution degree : 2
Rated impulse withstand voltage : 2.5 kV
Circuit disconnection : micro disconnection (μ)
Proof Tracking Index (PTI) : 175
Level of glow wire test : 850 degree
Number of operating cycles : 10.000 cycles
Reset
Alles bestens?
Happily connected?
Moment Zeit:
Excellent. Please take a moment to:
Stay in touch and discover more via:
CUSTOMER SUPPORT
Write a review
von Eve Tell your friends
Facebook
facebook.com/meeteve
X
@meeteve
Eve Newsletter
evehome.com/newsletter
YouTube
@MeetEve
Instagram
@meet_eve
Eve Blog
blog.evehome.com
Hereby, Eve Systems declares that this device is in compliance with the
essential requirements and other relevant
provisions of Directive 2014/53/EC. The declaration of conformity is available
at www.evehome.com/doc
Eve Systems GmbH, Rotkreuzplatz 1, 80634 München, Germany
Product: 10ECM8351 • Model: 20ECM8301 • Part: 51ECM8351
Please keep your Matter setup code in a safe place. You need it to securely
add Eve to your home, and nobody but you has a copy.
References
- Eve Blog | evehome.com
- Contact Us | evehome.com
- Which hub is right for me? | evehome.com
- Newsletter | evehome.com
- Declaration of Conformity | evehome.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>