BASSHEADGarage BHG-WM Wattmeter Instructions
- August 31, 2024
- BASSHEADGarage
Table of Contents
BHG-WM Wattmeter
“`html
Specifications:
- AC Voltmeter: 0 – 200 V Rms
- AC Ammeter: 0 – 150 A Rms
- Power Factor: 0.50 – 1.00
- Max Wattage: 20,000+ Watts
- Frequency range: 15 – 100 Hz
- Display: 1.3” OLED Monochrome
- Connectors: 3.81 mm Plug connectors
- Case material: PETG Plastic
- Dimensions: Height: 1.1” – Width: 2.65” – Depth: 1.57”
Product Usage Instructions:
Wiring Diagram:
+ Battery Positive – Battery Ground
R – Remote (Head Unit)
V – Connect to Car Amplifier speaker output + & C – Connect
to the Current Transformer that goes around the positive or
negative speaker wire.
Functions:
Pressing the button allows you to change between various display
modes, each showcasing different information:
- Wattage
- Impedance
- Power factor
- AC Voltage
- AC Amperage
PEAK MODE: Holding the button for an extended
duration activates PEAK MODE, displaying the peak of each value. To
deactivate, hold the button again.
Display Modes:
| WATTAGE | 9583 W |
|---|---|
| iMPEDANCE | 1.6 OHM |
| VOLTAGE | 133 V |
| CURRENT | 83 A |
| APPARENT POWER | 11039 VA |
| POWER FACTOR | 0.87 |
FAQ:
Q: How do I activate PEAK MODE?
A: To activate PEAK MODE, hold the button for an extended
duration. The display will show the peak values of each parameter.
To deactivate, hold the button again.
Q: What are the different display modes available?
A: The product offers display modes for Wattage, Impedance,
Power Factor, AC Voltage, and AC Amperage. You can cycle through
these modes by pressing the button.
“`
Specifications:
AC Voltmeter: AC Ammeter: Power Factor: Max Wattage: Frequency range: Display: Connectors: Case material: Dimensions:
0 – 200 V Rms 0 – 150 A Rms 0.50 – 1.00 20,000+ Watts 15 – 100 Hz 1.3” OLED Monochrome 3.81 mm Plug conectors PETG Plastic Height: 1.1`’ – Width: 2.65” – Depth: 1.57”
Wiring diagram:
+ Battery Positive – Battery Ground R – Remote (Head Unit) V – Connect to Car
Amplifier speaker output + & C – Connect to the Current Transformer that goes
around the positive or negative speaker wire.
Functions:
Pressing the button allows you to change between various display modes, each
showcasing different information:
– Wattage – Impedance – Power factor – AC Voltage – AC Amperage
PEAK MODE – Holding the button for an extended duration activates PEAK MODE,
displaying the peak of each value. To deactivate, hold the button again.
Display modes:
WATTAGE
9583 W
iMPEDANCE
1.6
OHM
VOLTAGE
133
CURRENT
83
V
A
APPARENT POWER
11039 VA
POWER FACTOR
0.87
GARAGE
BASSHEADGARAGE.COM @BASSHEADGarage
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>