MINISO X16 Wireless Earbud User Manual
- August 30, 2024
- MINISO
Table of Contents
MINISO X16 Wireless Earbud
Take out and pair it
When using it for the first time, take out the left and right carpet light the
earphones Mash the internally, and the earphones will enter the automatic
pairing mode.
How to wear headphones correctly
Product Description
Specification of Product
- Model of Product: X16
- Version: V5.4
- Effective Distance: Approx. 10m
- Speaker Diameter: 6mm
- Impedance: 329
- Frequency Response: 20Hz-20KHz
- Microphone Sensitivity: -42dB‡3dB
- Earphone Input: 5V- 25mA
- Charging Case Input: 5V – 180mA
- Charging Case Output: 5V – 50mA
- Earphone Battery Capacity: 25mAh
- Charging Case Battery Capacity: 180mAh
- Duration: Approx. 3.5 H (Earphone)
- Earphone Charging Time: Approx. 1 H
- Charging Time of the Charging Case: Approx. 1 H
Touch Operation
Connect with Bluetooth device
Open the Bluetooth settings option of the Bluetooth device to be paired,
enter the options, and find the Bluetooth pairing name of the headset
“MINISO-X16”.Click the pairing name to pair.
Indicator Light Description
- When the headset is turned on: the red light and the blue light flash alternately
- When the headset is turned off:
- After the red light is on, it goes out
- Pairing status: red light and blue light flash alternately
- Connection successful: no light
- Headphone Charging: In the Charging case the indicator light is always blue, and the headset red light is always on. After being fully charged, the red light of the earphones goes out, and the Charging case indicator light goes out at the same time.
- Charging of the Charging case: The red light on the charging case indicator flashes, and the red light of the charging case indicator remains on after being fully charged.
Power On
Auto power on The earphones are taken out of the charging case, and the
Earphone will be powered on, with the prompt sound of “Du”. Manual power-on:
Long press for 3 seconds, and the Earphone will be powered on.
Power Off
Auto power off Put the Earphones in the charging case, and the Earphones will
be powered off.
Manual power off Long press for 5 seconds and the Earphones will be powered
off.
Note: After powering on, if it is not paired with a Bluetooth device for
3 minutes, it will automatically shut down; Exceeded the effective connection
distance and did not connect to the Bluetooth device, it will automatically
power off after 3 minutes.
Once Press
Double Press
Triple Press
Long Press
Item list
FCC ID: 2BHJR-X16
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
US REP
Company name: REP America LLC
Address: 1942 Broadway St. STE 314C, Boulder
CO 80302, United States
Contact Person: Ben Xu
Email: d.zeng@rep-europe.de
ContactPhone: 719-201-3314
Warranty Statement
MINISO product warranty card
The above guarantee does not apply to the following situations
- The validity period of the three guarantees has been exceeded;
- Altering of the warranty cards and product code does not match the product itself;
- Failure of damages caused by misuse, abuse, or improper transportation, use, maintenance, or storage;
- Failure of damages caused by force majeure (such as earthquake, war, fire, etc.) or accident;
- Zippers and tower buckles are damaged due to excessive force;
- Off-line or tear caused by overloading;
- Any damage caused by sharp objects;
- Products with signs of burn damage or waterlogging;
- Damage caused by unauthorized dismantling and modification;
- Aging, discoloration, wear, cracking, and other losses that occur during normal use of the product.
- If the product’s original logo or label is changed or damaged, this warranty will be invalid. The completeness and appearance of the product and accompanying materials are not covered by the warranty. You should inspect the product on-site when receiving it and raise objections to any discrepancies. MINISO Pro dict service policy If you encounter a problem, please contact our customer service to solve it. After-sales email: 7@hifi-earphone.com
Disclaimer
This manual does not come with any form of warranty, position expression, or
other implications. The products, specifications, and information mentioned in
this manual are for reference only, and the content will be updated on the
website at any time without prior notice.
Warranty statement
The following guarantee is made for the products attached to this document: If
the product is damaged due to quality defects under normal use within
twelve(12) months from the date of your purchase (the “Warranty Period”), and
if it can be repaired, it will be repaired free of charge; If the manufacturer
confirms that it cannot be repaired, it will be replaced free of charge; The
repaired product will continue to be covered by the warranty for the remaining
warranty period(a minimum of not less than 30 days).
The purchase date shall be based on the sales invoice date; if the purchase date cannot be determined, the warranty period shall be calculated as thirteen(13) months from the product production date. If you want to apply for a warranty, please call the product service hotline first and follow our instructions. When applying for a warranty, you are required to provide a valid sales invoice that is accurate, complete, and filled out.
Guidelines for safe and effective use
Note: Please read this information first before using your Bluetooth
headset. If the user makes modifications or modifications to this Bluetooth
headset without permission, the user will lose the right to continue to enjoy
the services included in the device
Electromagnetic interference
Electronic devices: To avoid the effects of electromagnetic interference or
configuration incompatibility, please turn off your Bluetooth device by the
regulations in place with clear instructions. Civil Aviation: After boarding
the plane, please turn off your Bluetooth headset according to the flight
attendant’s instructions. It is strictly prohibited to use Bluetooth headsets
during flight to avoid interference with the aircraft communication system.
Safety matters
Placement: It is recommended that when you are not using the Bluetooth
headset, place it in a place where it will not be squeezed. Squeezing may
cause damage to the product or personal injury. Children: Do not let children
play with Bluetooth headsets. Some of the small parts are detachable and may
be swallowed and cause danger.
Important safety tips
- Except for the operation methods specifically marked in the manual, please do not attempt to disassemble or replace any parts of the product.
- This product contains a built-in rechargeable battery, It is prohibited to hit, squeeze, Puncture, or short-circuit the battery.
- If there are abnormal phenomena such as excessive temperature, deformation, bulging, or leakage, please stop using them. Do not expose the battery to open flames or sunlight.
- Do not use the battery after it has been immersed in water or high-temperature or high-pressure environments such as the sun, heaters, or stoves.
- After using the earphones, do not place them earphones in a humid, dusty, oily smoke, steam, direct sunlight, or other high-temperature and high-pressure environment to avoid damage to the earphones and battery.
- The battery can be charged and discharged for a limited number of times and will eventually age. If the battery is used abnormally, it can be replaced with a new one.
- However, do not replace the battery by yourself. If the battery is not replaced properly, there is a risk of explosion. It can only be replaced by an after-sales service provider of the same or equivalent type. battery usage.
- After the product is used and scrapped, do not throw the product into a fire.
The waste should be disposed of in strict accordance with the garbage classification. Please use this product reasonably and correctly to avoid causing certain injuries and environmental damage. During the use of headphones, due to long distances, obstacles in the middle, or a series of interferences such as other radio signals, Bluetooth signals, WIFI signals, etc., the headphones are used when listening to music, watching videos, playing games, etc., there will be occasional lags, voice out-of-sync or disconnection. If this happens, please reconnect the headphones or stay away from interference.
When charging, please use a charging device with an output voltage of DC 5V/1A. You must choose a charging device from a regular manufacturer that has obtained CCC safety certification. Do not use a fast-charging charger to avoid excessive battery load, which may cause The battery to be damaged. Do not charge continuously for longer than the specified charging time. Do not use it while charging to avoid damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>