Erommy WQG043 20x40ft Party Tent Instruction Manual

INSTRUCTION MANUAL

20x40FT Party Tent

SKU: WQG043

ATTENTION:

1. Please check the manual carefully and make sure you have received all the parts.
2. If there is any missing, please let us know the letter of the parts you need.
3. If there is any damage, please send clear photos to us, we will check and offer you best solution soon.

Box A

Part number

| Photo| Part name| Quantity (pcs)
---|---|---|---
27| | Roof|

1

28

| | Sidewalls| 12
29| | Endwalls|

2

Box C

Part number

| Photo| Part name| Quantity (pcs)
---|---|---|---
1| | 1#Pipe|

14

2

| | 2#Pipe| 14
4| | 4#Pipe|

11

6

| | Reinforcement bar A| 4
21| | Steel wire|

24

Box D

Part number

| Photo| Part name| Quantity (pcs)
---|---|---|---
3| | 3#Pipe|

30

4

| | 4#Pipe| 3
7| | Reinforcement bar B|

7

Box B

Part number

| Photo| Part name| Quantity (pcs)
---|---|---|---
5| | Clamps|

28

8

| | 140° 3way-connectors| 2
9| | 140° 4way-connectors|

5

10

| | 110° 3way-connectors| 4
11| | 110° 4way-connectors|

10

12

| | Footplate| 10
13| | Corner footplate|

4

14

| | Peg| 54
15| | Peg|

24

16

| | Spiral peg| 4
17| | Rope|

4

18

| | Hook| 14
19| | Bungee ball|

116

20

| | Clamp| 8
22| | Turn buckle|

12

23

| | Screw M6x30mm| 8
24| | Screw M6x80mm|

14

25

| | Screw M6x50mm| 28
26| | Screw nut|

50

Warning:

1. In order to prevent rusting from air exposure, oil is applied to the surface of the pipes. Before setting up the tent, please carefully remove the oil to keep the cover clean..
2. Take note that the tent needs to be handled carefully to avoid damage.
3. Do not force the frame as it may be damaged in the process.
4. Tents are designed as temporary shelters and should be evacuated in extreme weather conditions.
5. The windows may be slightly sticky to each other, when you unfold the windows, please do as softly as you can. Or the windows may crack during the process.

Please select a suitable site for the tent to avoid the damage to underground sprinkler systems, water, gas, or electrical lines.

Tips:

Here’s a brief summary of the order in which to assemble this party tent:
First, assemble the entire roof frame.
Second, assemble the frame of only one side of the window so that the top cloth and the two roller shutters can be easily fixed to the frame without the help of a ladder.
Third, assemble the frame for the window on the other side.
Finally, assemble the bottom frame and use ground nails to secure the entire party tent.
Both roller shutter doors can be opened, and the number of windows can be determined according to your needs.

Now let’s start installing this party canopy!

STEP 1

Insert part (2) into part (1) and make sure the holes are aligned.

[1] x14

[2] x14

STEP 2

Use two pieces of (5) part, align its holes with the holes of (1) part and (2) part, and secure with (25) screws and (26) nuts.

[5] x28

[25] x28

[26] x28

STEP 3

Connect the (8) connector to pole (1) and the (10) connector to pole (2).

[8] x2
140°

[10] x4
110°

STEP 4

Connect the (9) connector to pole (1) and the (11) connector to pole (2).

[9] x5
140°

[11] x10
110°

STEP 5

Attach a reinforcing rod (7) to the rod (1) using screws (24) and (26).

[7] x7

[24] x14

[26] x14

STEP 6

Use the two ends of one crossbar (3) to connect the two joints (9), then use the two ends of the two crossbars (3) to connect the two joints (11), and so on. The crossbars on both sides are connected to joints (8) and (10), and the entire top frame is assembled.

[3] x18

STEP 7

Combine (21) with (22) and secure them to the (2) pole.

[21] x24

[22] x12

STEP 8

Attach the (4) pole to the (10) and (11) connectors on one side.

[4] x7

STEP 9

Cover the frame with the roof (27).

[27] x1

STEP 10

Use elastic balls (19) to secure the top cloth (27) and the door (29) to the frame.
Pay attention to the tension of the bungee balls, because if you use too many bungee balls on one side of the tent, the other side may be too tight to tie down.

[29] x2

[19] x28

STEP 11

Attach the (4) pole to the (10) and (11) connectors on the other side.

[4] x7

STEP 12

Connect the (12) footplate and (13) corner footplate to the (4) vertical rod.

[12] x10

[13] x4

STEP 13

Connect the footplates on both sides with (3) pipes.

[3] x12

STEP 14

Use clamps (20), screws (23) and nuts (26) to connect the reinforcing rod (6) to the horizontal rod (3) and vertical rod (4).

[6] x4

[20] x8

[23] x8

[26] x8

STEP 15

Use U-shaped ground nails (15) to secure the frame firmly to the ground.

[15] x24

STEP 16

Fix the hanging cloth on the vertical pole (4) with hook (18).
There are Velcro strips on the hanging fabricc27 for fastening.

[18] x14

STEP 17

Use elastic balls (19) to fix the window (28) and the top cloth (27) on the crossbar (3) together. Velcro on the window is used to secure the window securely to the vertical pole (4).

[28] x12

[19] x84

STEP 18

Use L-shaped ground nails (14) to secure the extended window, and use ropes (17) and ground nails (16) to secure the party tent firmly to the ground.

[14] x54

[16] x4

[17] x4

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>