Studio Titan STA-01-350LW-10 Leg Weight Set Owner’s Manual
- August 30, 2024
- Studio Titan
Table of Contents
Studio Titan STA-01-350LW-10 Leg Weight Set
Specifications
-
STA-01-350LW-10 Leg Weight Set
Specification:- Material composition: The weight and bolt are made of steel.
This product does not contain lead.
- Material composition: The weight and bolt are made of steel.
-
STA-01-350LW-15 Leg Weight Set
Specification:- Material composition: The weight and bolt are made of steel.
This product does not contain lead.
- Material composition: The weight and bolt are made of steel.
-
STA-01-350LW-10 Leg Weight Set
Specification:- Material composition: The Vertical and Horizontal columns are made of aluminum. Counterweight is S20C steel. The nuts and bolts are made of steel. The casters are polyurethane. This product does not contain lead.
Product Usage Instructions
Intended Use
This product is intended for use by professional and commercial
photographers in a studio environment. Some assembly is required, and we
recommend using an assistant during the initial product assembly. Please read
all documentation prior to assembly.
Component Identification
Component Identification: STA-01-350-LW10 / STA-01-350-LW-15
Assembly Steps
STA-01-350LW-10 / STA01-350LW-15 Leg Weight Set
- Locate the hex key and remove the hex screw from the leg weight. Note the order of fastener connection: [Screw and then, Lock washer and then Flat washer.], [See: DIAGRAM: A]
- Locate the hole in the leg of the base. Position the leg weight under the leg. Lift the leg weight and position it under the leg hole so you can see the integrated nut in the leg weight. With the hex key tighten the fastener. Repeat for the two remaining legs.
FAQ
-
Q: What is the intended use of this product?
A: This product is intended for use by professional and commercial photographers in a studio environment. -
Q: What are the material compositions of STA-01-350LW-10 and STA-01-350LW-15 Leg Weight Sets?
A: STA-01-350LW-10 Leg Weight Set is made of steel, while STA-01-350LW-15 Leg Weight Set has vertical and horizontal columns made of aluminum, counterweight made of S20C steel, nuts and bolts made of steel, and casters made of polyurethane.
Imported by: STEPHANIE MCNEIL CORPORATION
250 Augusta Avenue – Suite 204 Toronto, Ontario, M5T 2L7 Canada
647-879-7837
info@studiotitanamerica.com
studiotitanamerica.com
Made in: South Korea
CAUTION
INSPECT BOXES AND INTERNAL COMPONENTS FOR SHIPPING DAMAGE PRIOR TO ASSEMBLY
WARNING
READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND OPERATION
CAUTION: Use leather work gloves supplied with the camera stand and
safety glasses when handling the box, when opening the box and when assembling
the product.
HAZARD: Strapping is under tension and can jump when cut. Strapping and
Buckles, Protective Edging, Plastic Walls, Plastic Caps and Product Components
and parts should be handled with care. Work slowly, use extra caution to avoid
any sharp edges.
Additional Tools may be Required: The essential tools are included. The
following tools are recommended to be on site: Box Cutter, Scissors, Screw
Driver, Plyers or Adjustable wrench, Metric Hex / Allen Key set
CAUTION
TIPPING HAZARD
!!!! WARNING !!!! TO AVOID DANGER OF SUFFOCATION, KEEP PLASTIC BAGS SUPPLIED WITH THIS PRODUCT AWAY FROM BABIES AND CHILDREN!
Transit Damage:
Each package is inspected prior to being shipped from the warehouse to
insure that is in perfect condition. Some packaging includes engineered
plastic walls. Wearing work Gloves, while following the Assembly Steps,
carefully inspect the contents inside the boxes. If anything seems unusual,
!!!STOP!!! Send images to:
info@studiotitanamerica.com for a second
opinion. If there are damaged OR Loose parts, do not assemble the product, you
may injure yourself. If the damage is noticeable such as cracks or loose or
broken parts contact your dealer for exchange. If the damage is minor or
cosmetic and does not compromise the safe assembly or operation of the stand
send images of the parts that are affected to:
info@studiotitanamerica.com.
Arrangements will be made to provide you with replacement parts to restore the
product to new condition.
CAUTION
INSPECT BOXES AND INTERNAL COMPONENTS FOR SHIPPING DAMAGE PRIOR TO ASSEMBLY
Product Identification
Product Nameplate / Label is located on the vertical column assembly.
The label information is indicated below:
STUDIO TITAN AMERICA
No. [Model Number] – [Manufacture Date] Imported by / Importe par
STEPHANIE MCNEIL CORPORATION
250 Augusta Ave, Suite 204
Toronto, ON MST 2L7 CANADA
Manufactured in / Fabrique en
SOUTH KOREA
Label examples are indicated below:
Intended use:
This product is intended for use by professional and commercial photographers
in a studio environment. Some assembly is required, we recommend using an
assistant during the initial product assembly. Please read all documentation
prior to assembly.
WARNING
READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND OPERATION
Component Identification: STA-01-350-LW- 10 / STA-01-350-LW-15
Assembly Steps: STA-01-350LW-10 / STA- 01-350LW-15 Leg Weight Set
- Locate the hex key and remove the hex screw form the leg weight. Note the order of fastener connection: [Screw and then, Lock washer and then Flat washer.], [See: DIAGRAM: A]
- Locate the hole in the leg of the base. Position the leg weight under the leg. Lift the leg weight and position it under the leg hole so you can see the integrated nut in the leg weight. With the hex key tighten the fastener. Repeat for the two remaining legs.
STA-01-350LW-10 Leg Weight Set Specification
- Individual Leg Weight : 3 x 10kg / 22lbs
- Total Weight : 30 kg / 66 lbs
Material composition:
The weight and bolt is made of steel. This product does not contain lead.
STA-01-350LW-15 Leg Weight Set Specification
- Individual Leg Weight : 3 x 15kg / 33lbs
- Total Weight : 45 kg / 99 lbs
Material composition:
The weight and bolt is made of steel. This product does not contain lead.
STA-01-350LW-10 / STA-01-350LW-15 Leg Weight Set Specification &
Directions for Materials Recycling
-STA-01-350LW-10 Leg Weight Set Specification
- Individual Leg Weight : 3 x 10kg / 22lbs
- Total Weight : 30 kg / 66 lbs
-STA-01-350LW-15 Leg Weight Set Specification
- Individual Leg Weight : 3 x 15kg / 33lbs
- Total Weight : 45 kg / 99 lbs
Material composition: The Vertical and Horizontal columns are made of
aluminum. Counter weight is S20C steel. The nuts and bolts are made of steel.
The casters are polyurethane. This product does not contain lead. STUDIO TITAN
KOREA RESERVES THE RIGHT TO MAKE PRODUCT CHANGES AND PRODUCT
ENHANCEMENTS. PRODUCTS SUPPLIED MAY NOT BE DELIVERED EXACTLY AS ADVERTISED OR
SHOWN ON THE WEBSITE OR IN THE MANUAL.
- The column box blue outer plastic material is Poly- propylene, abbreviated as PP, is a recyclable thermo- plastic polymer widely used in many different products. PP is rugged. PP’s resin identification code is 5, and it is recyclable.
- Plastic bags are made of LDPE (Low-Density Polyethylene) – Recyclable plastic (check Local Authority) LDPE can be recycled. However, check with your Local Authority to ensure it is recycled in your area. This is described as a hard flexible plastic.
- The Corrugated cardboard box can be recycled at depots, in municipal curbside collection programs and through private recyclers.