REDRAGON B0C77NKDR6 M612 PRO RGB Gaming Mouse Instruction Manual

 REDRAGON B0C77NKDR6 M612 PRO RGB Gaming Mous

Dear user

Thank you for choosing our REDRAGON product. To protect your rights and for better customer service, we ask that you note our warranty rules.

1. Within the guarantee period, the repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into the water, plugging into improper current or voltage, and damage caused by natural disasters such:h fire, flood, or earthquake are not included.
2. Consumable parts (such a foot pads) and spare parts replacement are not included in our warranty.

Button Instructions

1. Left mouse button.
2. Right mouse button.
3. Scroll wheel (click as middle mouse button).
4. Side key, defaulted function: FORWARD key on the keyboard.
5. Side key, defaulted function: BACKWARD key on the keyboard.
6. DPI+ button (defaulted to speed up the cursor).
7. DPI- button (defaulted to slow down the cursor).
8. Report rate switch button(Click the button to switch the report rate from 25HZ/250HZ/SOOHZ/1 OOOHZ).
9. Fire button.
10. BT pair button.
11. BT/OFF/2.4G button

Installation

Plug the Nano receiver to the USB port on your computer. Make sure the switch on the bottom of the mouse is on •2.4G”. Press any key to get Mouse ready to work

Charging your mouse

The battery indicator LED located under the scroll wheel key, it is flashing slowly in RED while the gaming mouse is out of power, please connect the mouse and computer with the type CUSB cable,it is workable while charging,

Wake up your wireless mouse

To save power, the Mouse was programmed with a sleeping mode when it is out of work for 1 minute, Please press any key to wake up the mouse.

Wired connecting

Find the type C-USB cable in the packaging, switch the mode button to OFF (Located at the mouse bottom), and plug the mouse into the PC by cable for a wired connection, it is charging at the same time.

Pairing in BT mode

Switch the mode button to BT (located at the bottom of the mouse), press and hold the mouse pair button (Right next to the mode button)for 3 seconds, scan the device on PC /tablet/notebook/MAC, find the mouse device name or BT 5.1 mouse for pairing.

DPI adjustment Instructions

User mode indicator light: Located below the scroll wheel key.

• Red—— Gear 1 (500 DPI)
• Blue—- Gear 2 {1 on DPI)
• Green —- Gear 3 (2000 DPI)
• Purple — Gear 4 (3000 DPI)
• Yellow··- Gear 5 (8000 DPI)

Backlight adjustment

Press and hold the Middle button +Forward button to switch the mouse backlight in light ON/Breath/Flow/Neon/RGB ON/Mix color breath/OFF.

Software Instructions

Users can adjust the following settings through the software after downloading and\ installing it.

1. Adjust the DPI of the mouse at the user’s discretion.
2. Adjust the polling rate of the mouse at the user’s discretion. (range; 125HZ-250HZ-S00HZ-1 0OOHZ).
3. Macros: Record up to 59 actions and trigger with one key.
4. Continuous keystroke function: Set the number of dicks and delay time.
5. Customized 9 mouse buttons.
6. Customized RGB backlight in patterns/brightness/speed.

FAQs

1. If the mouse is not responding, please check whether the mouse is plugged correctly in the corresponding computer’s USB port, or try another USB port.
2. If the mouse is moving slowly, jumping, or with delay, please try another surface. Dark, dirty, un-flat, bright surfaces may affect the performance of the mouse. A mouse pad is strongly recommended.

FCC

FCC Statement

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cau.se harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1 )this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS{s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

BATTERY SAFETY GUIDELINES

• DO NOT replace the battery with a different model.
• DO NOT use this product if the battery shows signs of damage including, but not limited to tearing, deformation, leakage, or the smell of electrolytic material.
• DO NOT touch the battery if the material is leaking and seek immediate medical attention if any material comes into contact with your skin or eyes.
• DO NOT expose the battery to liquid, heat sources, electricity (outside of the product itself), or other non-standard operating conditions.
• DO NOT remove the battery except for proper disposal and recycling as required by local laws and regulations.
• DO NOT impact, bend, alter, disassemble, or otherwise damage the battery as the contents are volatile, hazardous, and harmful.

CAUTION

Failing to follow all .safety guidelines may result product damage, explosion, fire, and/or electric shock. Thls device contains license-exempt transmitter(s)/receiver{s) that comply with Innovation, Sdence and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1} This device may not cause interference. 12) This device must accept any Interference, Including Interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>