euromet ELPMB84 Tilt Adaptor User Guide
- August 28, 2024
- euromet
Table of Contents
euromet ELPMB84 Tilt Adaptor
Product Specifications
- Product Name: ELPMB81 Tilt Adaptor
- Model Number: V12H006AE0
- Email: info@euromet.com
- EM 23400
- Material: Steel and Brass
- Weight: 6 kg
- Max Load: 250 kg (certified)
- Standard VESA: Yes (both sides)
- Dimensions: 340 x 180 x 180 mm
- Packaging Dimensions: 360 x 200 x 200 mm
Product Usage Instructions
General Information and Compatibility:
The ELPMB81 Tilt Adaptor is designed to hang the ELPMB84 from a truss and provide projection orientation adjustments. It is equipped with fastening systems to secure the desired position. The adaptor uses a Clamp with a diameter of 50mm.
The ELPMB81 Tilt Adaptor has the standard VESA and a male thread knob, making it compatible with all optional Euromet products with Standard VESA and female thread. It can be used with the following products: 22000 and 22500 MATRIX, 21400 KITE, 20900 KALIBRO, and 22740 RAIL.
Maintenance
- Hardware’s Inspection: Do not attempt to service the product yourself unless specified in the User’s Guide. Seek assistance from qualified service personnel for any other servicing needs.
- Cleaning: Use a soft, dry cloth to gently wipe down the mount’s surfaces to remove dust or dirt. For tough stains, lightly dampen the cloth with water or a mild cleaner. Avoid harsh chemicals that could damage the mount’s finish. Ensure the mount is completely dry before reattaching the projector to prevent electrical issues.
- Lubrication of Moving Parts (if applicable): If the mount includes moving parts like hinges or swivel mechanisms, apply a small amount of recommended lubricant to ensure smooth operation and prevent damage to components.
- Conclusions: By following this maintenance plan, you can keep your mount adapter in optimal condition, prolonging its lifespan and ensuring reliable performance for your presentations or entertainment needs.
FAQ
- Q: Can the ELPMB81 Tilt Adaptor be used with other projector models?
- A: The ELPMB81 Tilt Adaptor is specifically designed to work with the ELPMB84 and may not be compatible with other projector models.
- Q: What is the maximum weight capacity of the ELPMB81 Tilt Adaptor?
- A: The ELPMB81 Tilt Adaptor has a certified maximum load capacity of 250 kg.
Safety Precautions
DANGER
- Failure to comply with these safety precautions results in death or serious injury;
- ELECTRICAL SHOCK HAZARD! Always turn off, disconnect, and disengage all power sources to the projector before servicing;
- Maximum projector weight limit is 45kg (99 lbs).
WARNING
Failure to comply with these safety precautions may result in serious injury.
- At least two qualified people should perform the installation procedure. Personal injury and/or property damage can result from dropping or mishandling the projector;
- If mounting to ceiling studs, make sure that the mounting screws are anchored into the center of the ceiling studs. Use of an edge-to-edge stud finder is recommended;
- Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there are no electrical wires in the wall;
- Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of impact.
General information and compatibility
M-tilt is an OPT making it possible to hang Matrix to a truss and provide projection orientation:
- by tilting +/-10° on 2 rotation axes (pitching, rolling);
- by rotating by 360° (yaw).
This item is also equipped with fastening systems to secure the desired
position.
It uses Clamp wit 50mm of diameter.
Dimensions
| List of components included | M-TILT (nothing other) |
|---|---|
| Dimensions | 340 x 180 x 180 [mm] |
| Packaging dimensions | 360 x 200 x 200 [mm] |
| Material | Steel and Brass |
| Weight | 6 [kg] |
| Max load | 250 [kg] (certified) |
| Standard VESA | YES (both of side) |
M-TILT has the standard VESA and the unlosable knob (male thread), so you can use with all the optional Euromet with Standard VESA and female thread.
You can use M-TILT with:
- 22000 and 22500 MATRIX;
- 21400 KITE;
- 20900 KALIBRO;
- 22740 RAIL.
Optional Tilt Adaptor
Optional Tilt Adaptor (code: ELPMB81 V12H006AT0)
The ELPMB81 Tilt Adaptor is an option that makes it possible to hang the ELPMB84 from a truss and provide projection orientation adjustments:
- by tilting +/-10° on 2 rotation axes (pitching, rolling);
- by rotating 360° (yaw).
This item is also equipped with fastening systems to secure the desired position.
The following paragraph explains how to use the ELPMB81:
- Loosen the 2 grub screws (014) and remove the safety pin (013);
- Remove the ELPMB81 female connector (017) where the clamp has already been fastened and secure it to the truss;
- Place ELPMB84 frame on an even surface with the base plate turned upwards;
- Apply the ELPMB81 Tilt Adaptor to the base plate of the frame and screw the thumb screws (015) into the 4x female M8 threaded holes with 100x100mm distance (tighten the 4 thumb screws manually);
- Insert the male pin (016) into its counterpart (017) again and insert the previously removed safety pin (013) into the specific hole;
- The ELPMB84 frame can now rotate 360° horizontally. Choose the desired position and secure the rotation by tightening the 2 grub screws (014) (in the diagram the grub screws (014) are fully removed from the female insert for an easier understanding, but it is only necessary to loosen them enough as to remove the male insert);
- Once the ELPMB84 frame is secured to the truss, use the 4x ELPMB81 adjustment pins (018) to adjust pitching and rolling. When you have chosen your desired position, you can secure it in place.
Maintenance
Do not try to service this product yourself, except as specifically explained in this User’s Guide. Refer all other servicing to qualified service personnel.
HARDWARE’S INSPECTION
- The ELPMB81 tilt adapter does not require special maintenance, but a visual inspection must be conducted before each installation involving the system.
- Please conduct a visual inspection to ensure that all screws are in the correct positions and none are missing. Tighten any loose hardware as needed to maintain stability and prevent the risk of the projector falling or becoming misaligned.
- Ensure that screws, nuts and all components are not bent, damaged, or broken.
- Please use the appropriate tool to check that all screws are securely tightened.
- If any parts are broken or missing, please contact the seller to obtain the necessary spare parts.
CLEANING
Use a soft, dry cloth to gently wipe down the mount’s surfaces, removing any dust or dirt. For stubborn stains or dirt buildup, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals that may damage the mount’s finish. Ensure that the mount is completely dry before reattaching the projector to prevent any electrical issues.
LUBRICATION OF MOVING PARTS (IF APPLICABLE):
If the projector mount includes moving parts such as hinges or swivel mechanisms, apply a small amount of lubricant to ensure smooth operation. Use a lubricant recommended by the manufacturer to prevent damage to the mount’s components.
CONCLUSIONS
By following this maintenance plan, you can keep your mount adapter and in optimal condition, prolonging their lifespan and ensuring reliable performance for your presentations or entertainment needs.
email: info@euromet.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>