NEBO NEB-TRI-01-G Tripod with Dual Head Crossbar User Manual
- August 27, 2024
- NEBO
Table of Contents
NEBO NEB-TRI-01-G Tripod with Dual Head Crossbar User Manual
INCLUDED
- NEBO TRIPOD
- DUAL-HEAD CROSSBAR
- CARRY BAG
SPECIFICATIONS
Dimensions Open (L/W/H): 1000 x 1000 x 1900mm
Dimensions Closed (L/W/H): 180 x 180 x 1060mm
Weight: 3500g
Carry Bag IP Rating: IPX4
SETTING UP THE TRIPOD
- Loosen the Leg Lock and fully extend the three tripod legs by pulling them out from the centre, then tighten the Leg Lock.
- Holding the tripod firmly in place, open the Quick Release Clamp, slide the tripod head to desired height level. Close the Clamp to lock the position.
CONNECTING YOUR LIGHT
- Using the NEBO Tripod Mounting Kit supplied with your NEBO Light. Insert the Quick Release Bolt into the Tripod Head slot (You will hear a click)
- To remove the light, pull the Upper Quick Release Clamp and lift the light upwards.
(Please refer to tripod mounting kit instructions supplied with the NEBO light)
USING THE DUAL-HEAD CROSS BAR
- Slot the Quick Release Bolt on the Cross Bar into the Tripod Head slot (You will hear a click).
- Connect up to 2 NEBO lights using the Quick Release Bolts (Refer to ‘Connecting Your Light’ instructions)
- To remove the Cross Bar, pull the Upper Quick Release Clamp and lift the Cross Bar upwards.
NEBO TRIPOD
COMPATIBLE WITH (LIGHTS SOLD SEPARATELY)
8,000 LUMEN RECHARGEABLE
CUBE AREA LIGHT
6,000 LUMEN RECHARGEABLE
DOME AREA LIGHT
5,000 LUMEN RECHARGEABLE
FLOOD LIGHT
8,000 LUMEN RECHARGEABLE
FLOOD LIGHT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>