ShoppyHub HP30 Projector User Manual
- August 27, 2024
- ShoppyHub
Table of Contents
USER’S MANUAL
Thanks for reading!
Enjoy your time with this projector!
Packing list
PS: Thank you very much for purchasing our company’s products.
Please check the products you have received,Whether the physical object is
consistent with the list; If the products and accessories you receive do not
match the list, please Contact the purchasing platform promptly. PS:Due to
different model versions, there may be certain differences in appearance and
functionality. Please refer to the actual product for accuracy.
Projector component and functions
*PS
- Do not place objects within 20cm near the heat dissipation holes.
- If lifting, please use screws of the specified specifications and choose a suitable bracket.
- Please do not look directly at the lens.
Common external devices
3.5mm headphone jack: speaker, headphone USB interface: USB flash drive,
2.5-inch portable hard drive HD IN: computer/laptop, TV box
Warning:
Running this device in a residential environment may cause radio interference.
Safety notice
Do not install in non ventilated places. Do not install in high temperature or humid places. Do not block the ventilation holes (intake or exhaust) Do not install in dusty or smoky places.
Remote control
PS:
Please pair the Bluetooth remote control first to facilitate the use of the
remote control and mouse functions.
- After turning on the machine, press the V- and F- buttons on the remote control at the same time, and the remote control indicator light will enter a flashing state.
- Use the remote control to operate the projector to enter the setting interface and enter the Bluetooth interface to search.
- Search for the name: BT Keyboard, and click Connect. It can be used after the connection is successful.
- If you cannot search for the relevant name, please repeat steps 1 and 2.
Warning tatement
This device com plies with part 15 of the FCC Rules. Operation is subject to
the following two conditio ns: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received ,
including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for com pliance could void the user’ s authority to operate the equipment.
Note: This equipm ent has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of th e FCC Rules. These lim
its are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not
occur in a particular installation. If this equipm ent does cause harmful
interference to radio or television reception, which can be de termined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorien t or relocate the receiving an tenna.
- Increase th e separation between the equipm ent and receiver.
- Connect the equipm ent into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>