iCON WM2.1, WM2.2 Professional Wireless Microphone Owner’s Manual

: August 27, 2024
: Icon

Table of Contents

What’s in the package?
Instructions for use
Specifications
Features
Precautions
Services
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**iCON WM2.1, WM2.2 Professional Wireless Microphone Owner’s Manual

**

What’s in the package?

WM 2.1 microphone
Receiver
Type-C charging cable
6.35 to 3.5mm adapter
18650 Battery
Handheld microphone anti-skid ring

Instructions for use

Instructions:

Plug the receiver into the microphone input of the speaker or amplifier;
Turn on the receiver power switch:
Turn on the power switch of the handheld microphone (install a 18650 Battery).

FM operation:

If you need frequency modulation, please operate with the receiver turned on:
When FM, just press the FM switch to adjust to the next frequency;
To operate on the frequency, turn on the power switch of the handheld microphone and the receiver at the same time, wait for about 3 seconds, when the signal light of the receiver flashes, the connection is successful.
Multi- channel use: simultaneously press and hold the switch of the handheld microphone and the SET button for about 8 seconds, the screen will display a horizontal line to lock the receiver.
In multi-channel operation, other receivers and transmitters need to be turned off at the same time, and only the receivers and transmitters that need to be paired are reserved.

Troubleshooting:

When there is no sound or the sound is weak, first check the power supply to ensure that the receiver is connected properly, the handheld microphone has sufficient power, and the battery is inserted in the correct way. When the power is normal or the sound is faint, please increase the volume of the speaker or amplifier.
When there is distortion or excess noise, check whether there are interfering devices nearby, such a CD players, computers, digital devices, earplug monitoring systems, etc, try to remove the device first. H multiple systems are used, the frequency interval between the systems can be increased.

Specifications

System specification parameters

Modulation mode| Digital frequency modulate
Frequency range| UHF 640-690 MHz
Receiving frequencies| 30(auto paring)
Frequency response| 75 Hz-18 kHz +3 dB
Max.deviation Range| ±50kHz(with level limiting)
Thd| <1.0 k@1kHz
Signal-to-noise ratio| > 98 dB
Working range| Up to 30-50 m
Rf carrier stability| ±0.005%(-10℃ -50℃ )
Receiver parameters

Power supply| 3.7V/18650 lithium battery
Power consumption| 100 mA
Battery life| Up to 6 hrs
Recharging time| About 3 hours (5V/1A)
Power supply| USB
Output| 3.5mm/6.35mm
Transmitter parameters

Features

Audio output:
6.35 mm male header.
switch:
Push up to open, push down to close.
Charging interface:
Use USB data cable to charge.
Receive antenna:
Receive the signal from the transmitter.
A channel indicator:
The signal light is on when channel A receives a signal.
Channel B indicator:
The signal light is on when channel B receives a signal.
Power Indicator:
It displays blue and the battery is full and the light goes out.
When the receiver is turned on,
it shows red, when charging receiver power switch when charging)
battery cover:
Built-in 18650 replaceable battery, open the battery cover and replace directly.

Precautions

Do not place the product in water or fire.
Do not use in places with signal interference, such as hospitals, airports, etc.t
Please do not disassemble the product without authorization, otherwise, you will lose the warranty qualification.
If the product fails, please contact the dealer.

Services

If your WM 2.1/WM 2.2 needs servicing, follow these instructions.
Check our online Help Center at http://support.iconproaudio.com, for information, knowledge, and downloads such as:

FAQ
Download
Product Registration
Video Tutorials
Very often you will find solutions on these pages. If you don’t find a solution, create a support ticket at our online Help Center at the link below, and our technical support team will assist you as soon as we can.
a ticket.
Once you have submitted an inquiry ticket, our support team will assist you to resolve the problem with your ICON Pro Audio device as soon as possible.
To send defective products for service:
Ensure the problem is not related to operation error or external system devices.Keep this owner’s manual. We don’t need it to repair the unit.
Pack the unit in its original packaging including end card and box. This is very important. If you have lost the packaging, please make sure you have packed the unit properly. ICON is not responsible for any damage that occurs due to non-factory packing.
Ship to the ICON tech support center or the local return authorization.
See our service centers and distributor service points at the link below:
If you are located in the United States please visit our help centre – https://support.iconproaudio.com and submit a ticket to the technical support team.
If you are located in Europe, please email the support team and wait for a response before sending the product to:
Sound Service GmbH European Headquarters Moriz-Seeler-Straße3
D-12489 Berlin
Telephone: +49 (0)30 707 130-0
Fax: +49 (0)30 707 130-189
E-Mail: service@sound-service.eu
If you are located in Hong Kong, please email the support team and wait for a response before sending the product to:
ASIA OFFICE: Unit F, 15/F., Fu Cheung Centre, No. 5-7 Wong Chuk Yueng Street, Fotan, Sha Tin, N.T., Hong Kong.
Tel: (852) 2398 2286
Fax: (852) 2789 3947
Email: info.asia@icon-global.com
For additional update information please visit our website at: www.iconproaudio.com