CTA PAD Series Medical Floor Stand with VESA Plate and Paragon Enclosure Instruction Manual

PAD Series Medical Floor Stand with VESA Plate and Paragon Enclosure

“`html

Specifications:

• Product Name: Medical Floor Stand with VESA Plate and Paragon
  Enclosure

• Models: PAD-MFS, PAD-MFSPL, PAD-MFSPS

Product Usage Instructions:

1. Installation:

Setting up Base to Body A:

Lift or push down lever to lock or unlock wheels. Follow the
diagram provided in the manual for detailed instructions.

Attaching Enclosure to VESA:

Align base (A) to body as shown. Align enclosure (K or L or M)
holes to VESA plate holes. Screw in using provided tools.

Setting up Tray:

Insert the small mount component (J) from the base. Align tray
(C) to mount component (J) and tighten screws using the provided
allen key.

Setting up Basket:

Identify the metal plate around the center of the body. Align
holes to the basket holes (B) and tighten screws using the provided
tool.

Setting up Power Surge:

Follow the instructions provided in the manual for setting up
power surge in the allocated brackets.

Setting up Cable Routing:

Route cables through the body and connect to the power source as
shown in the diagram.

Setting up Device & Enclosure:

Plug in the tablet cord, route cables through the body, and
connect to power surge. Lock or unlock the tablet enclosure with
the security key.

2. Adjusting Height:

Rotate knob counterclockwise to loosen, slide up or down body
neck to desired height, then rotate knob clockwise to tighten
securely.

3. Adjusting Angles and Orientation:

Tilt up/down for preferred angles and rotate left and right for
preferred orientation as needed.

FAQ:

Q: Is the power surge included with the product?

A: No, the power surge is only for illustration purposes and is
not included with the product.

Q: How do I lock or unlock the tablet enclosure?

A: Use the provided security key to lock or unlock the tablet
enclosure as shown in the manual.

“`

Medical Floor Stand with VESA Plate and Paragon Enclosure
PAD-MFS / PAD-MFSPL / PAD-MFSPS
INSTRUCTION – MANUAL

CONTENTS:
B A
C D
INSTALLATION:
1. Setting up Base to Body A
**Lift or push down lever to lock or unlock wheels

E
M5 Nut
F
x4
M5 x 8

H
x4
M5 x 14
I

M5 Allen Key
G J
x4
M5 x 12

N K
(PAD-MFSPL) Enlcosure only for PAD-MFSPL Kit
Foam Adapter & Sheet Bundle
L
(PAD-MFS) Enlcosure only for PAD-MFS Kit
M
(PAD-MFSPS) Enlcosure only for PAD-MFSPS Kit

2. Attaching Enclosure to VESA

I

K L M or

or

G

M5 x 12
E
M5 Nut
I A

I

H

M5 Allen Key

D
M5 x 14 M5 Allen Key
1A. Align base (A) to body as shown. From below, rotate in screw (H) using provided tool (I) until securely tightened.

2A. Align enclosure (K or L or M) holes to VESA plate holes. Screw in (G) above using provide tool while holding hex nut (E) tool from behind with fingers.

3. Setting up Tray

J

J

A

J

C

I
3A. Using the small mount component (J), insert from the base (as shown above). Using your fingers, slide until preferred height.

F

I

x2

M5 Allen Key M5 x 8
3B. Align tray (C) to mount component (J),then rotate in screw (F) in from front as shown using provided allen key (I) until securely tightened.

718-963-9845

4. Setting up Basket
x2 M5 Allen Key M5 x 8
IF B

5. Setting up Power Surge (Not Included) in the Allocated Brackets
M5 Allen Key
I

**Power surge for illustration and NOT INCLUDED.

4A. Identify the metal plate around the center of the body. Align holes to the basket holes (B) as shown and rotate in screws (F) using provided tool (I) until securely tightened.

5A. Using provided tool (I), loosen brackets a bit but not too loose that they fall. Slide in power surge as shown. Push the bracket in towards the body, until tightly fitted against power surge. Next, tighten screws from side with tool (I) until securely tightened.

6. Setting up Cable Routing

**Power surge for illustration and NOT INCLUDED.

7. Setting up Device & Enclosure

K L M or

or

6A. Plug one end of the tablet cord into device, and route the other end through hole in the back as shown above.

6B. Cable route from enclosure to the hole at the top of the body as shown above.

6C. Fish the cable through the entire body & out the bottom. Route through the opening in the base &plug to power surge as shown.

Adjusting Height
Rotate knob counterclockwise to loosen, and slide up or down body neck to desired height. Rotate knob opposite direction to securely tighten.

**Tablet shown for illustration and NOT INCLUDED.
7A. Lock or unlock your tablet enclosure (K, L, M) with security key as shown
N

7B. Find the appropriate size foam padding / sheet (N) for the tablet you wish to use. Make sure device is compatible for the enclosure. Lay in device and connect any cables/cords as needed.
N

Adjusting Angles and Orientation
Tilt up/down for preferred angles as needed. Rotate left and right for preferred orientation.
**Tablet shown for illustration and
NOT INCLUDED.

**Tablet shown for illustration and NOT INCLUDED.
7C. If needed, lay-in correct included masking insert. Close and lock enclosure afterwards and you’re set
718-963-9845

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>