MCHOSE GX87 Mechanical Keyboard User Guide
- August 26, 2024
- MCHOSE
Table of Contents
MCHOSE GX87 Mechanical Keyboard
Keyboard turning off: Switch the toggle to (OFF] and unplug the cable to disconnect.
Keyboard return rate: Wired made 1000Hz, 2.4GHz mode 1000Hz, Wireless
mode 125Hz
Note: The images in this manual are all schematic diagrams and may
deviate from the actual product. Please refer to the actual product for
accuracy.
2.4GHZ CONNECTION
Manual code pairing: Turn the upper switch to [2.4G model, then press the
combination key [FN+QI until the indicator light at the bottom of the Q key
flashes quickly to enter the code pairing state.
At this time, insert the USB receiver into the computer port, and after a
successful connection, the keyboard will restore the backlight effect,
completing the code pairing.
Note: First, put the keyboard into 2.4G pairing mode, and then plug the
USB receiver into the computer; When checking the code, it is necessary to
place the keyboard close to the receiver.
WIRELESS CONNECTIVITY
- Ine polling names or wireless channels, c, and s are all loxor suor labor o.01
The combination key for Wireless channel 2 is [Fn+E] The combination key of Wireless channel 3 is [Fn+R]
- Long press the combination key for about 3 seconds until the corresponding Wireless channel indicator light flashes quickly no dating matte keyboard has entered the painting of seared mode, and con de-palled and connected to the device.
- Press the combination keys entwv, t, or k to switch dences.
WIRED CONNECTION
- Switch the toggle to [OFF] to enter the wired mode
- Connect the cable to the Type-C port of the keyboard
- Connect the cable to the USB port of the computer. The keyboard is ready to use
POWER SAVING MODE
The keyboard automatically enters power-saving mode without any operation for
1 minute in wireless/2.4G mode. Click the button to wake up the keyboard.
LIGHT EFFECT DESCRIPTION
constant lion mode – treating mode – fantasy rainbow – keady to limonite –
Vialking in the rain – Kaindow wheel – button ripple – Star dots – Flowing
continuously- Follow the Current (default) – Follow the Shadow – Dazzling
LightWave – Rotating Windmill – Colorful
Waterfall – Blossoming
Wealth – Game Mode (default four directional keys 9 keys for WIA/S/D and ESC
to light up blue light (with driver to achieve customized button light color)
– turn off the light.
FN KEY COMBINATION DESCRIPTION
Fn+Win=Lock Unlock Win Key in Windowssystemss, the indicator light remains on
when the Win key is locked. and the Win key cannot be used.
In the Windows system, switching to Mac System mode, ne wi and Lent all keys
will be swapped, and F1-r12 is the
Minimonie Milton mini
- enter-wireless device 1, suppress to swallow tong press tor 3 seconds to the dollar
- Fn+E=Wireless device 2, short press to switch, long press for 3 seconds to pair.
- Fner Wireless device 3, short press to switch, long press tor 3 seconds to pair.
WINDOWS SYSTEM: FN KEY COMBINATION INSTRUCTIONS (MULTIMEDIA FUNCTIONS)
- [F131 Press the initial function to [return to desktop] –
MAC SYSTEM: FN KEY COMBINATION INSTRUCTIONS (MULTIMEDIA FUNCTIONS)
“In the Windows system, after switching to the Mac system, the Win and Left Alt keys will be swapped.
POWER DISPLAY
- In 2.4GHz/wireless mode (without USB inserted), press and hold the FN+B keys to check the battery power level.
- When fully charged, the number keys 1 to 0 will all light up with a green light.
- The green light for battery consumption gradually decreases, and when my battery power is low, the red button backs up. Release the PiN+8 keys to restore the light effect.
CHARGING
- By connecting the keyboard to the computer through the equipped USB cable, the keyboard can be charged.
- When charging, the status indicator light will display a marquee light, which is always green when fully charged
- When the status indicator light flashes red, please charge the keyboard promptly.
SPECIFICATIONS
- product model. oxo,
- Connectivity: Wireless/2.4GHz/Wired
- Charging interface: Type-C
- Charging voltage/current: DC SV m 1.5A
FCC STATEMENT
NOTE : This equipment has been tested and rounded to comply with the limits for a Class 8 digital device, under part 15 of the Fee Rules. These limits are designed to provide reasonable protection against harmless Interference In a residential institution. Inis equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the securement and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio I technician to help
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the Foc Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and the unis device must accept any interference received, including interferencee that may cause undesired operation.
CHARGING INSTRUCTIONS
- It is recommended to only use the computer USB interface to charge the keyboard;
- Do not use a fast-charging mobile phone charger to charge the keyboard;
- Do not use inferior non-standard power adapters to charge the keyboard;
- Do not use an overvoltage and overcurrent power adapter to charge the keyboard; |
- Please stay away from high-temperature equipment when charging:
- Please turn off the power switch when not in use for a long time.
- The above charging instructions also apply to other devices with charging functions (keyboard/mouse/- headphones/speakers, etc.)
WARRANTY CARD
Thank you for purchasing our company’s products. If there are any quality
issues with the products during the warranty period, please contact us. Please
provide this warranty card when contacting us so that we can provide you with
comprehensive after-sales service.
Product model:
Factory number:
Purchase date:
Purchase address:
Salesperson:
User Name
Warranty address
Warranty contact person
Contact phone number
Postal Code