MCHOSE AX5 Gaming Mouse User Manual

MCHOSE AX5 Gaming Mouse

OVERVIEW

Note:
The images in this manual are all schematic diagrams and may deviate from the actual product. Please refer to the actual product for accuracy.

2.4GHZ CONNECTION MODE

• • Manual pairing dongle: The dongle is default paired. If you need to manually pair the dongle, please download the driver. Switch the toggle to the top position (2.4G) to enter 2.4GHz mode. Plug the included dongle into the desired device and connect the driver. Click the driver (Settings ), Click (Pairing), and simultaneously press the (Left), (Center), and (Right) buttons of the mouse for about 3 seconds. The [Indicator) will light yellow and enter Pairing Mode. Click [Start Pairing) to pair the device. If pairing is complete, the indicator light will be off.
• The drive can be downloaded from [www.mchose.store) → [Support) → [Driver download) → [AX5 Mouse driver)

WIRELESS CONNECTION MODE

• After pairing timeout (3 minutes), the blue light will turn off when exiting pairing.

INDICATOR LIGHT STATUS

• When the device is starting up, the indicator will light for 5 seconds and then light off.
• When switching to 2.4GHz mode, the indicator will stay GREEN for 5 seconds and then light off.
• When switching to Wireless mode, the indicator will stay BLUE for 5 seconds and then light off.
• When switching the DPI button, the corresponding gear indicator will light for 5 seconds and then light off.
• The indicator light is supporting adjustment by using the mouse driver in single color constant on/breathing/off.

WIRED CONNECTION MODE

When connected by cable, the mode will default to wired mode and charging power even if the toggle is in 2.4GHz mode or Wireless mode.

POWER SAVING MODE

The mouse will go to first-level Auto-sleep mode after 5 seconds of sitting idle and go to second-level Auto-sleep mode after 20 seconds of sitting idle. Press any button to wake it up. (When the computer enters sleep mode, the mouse also enters deep sleep. You need to click any button of the mouse to wake up the mouse itself, and then click any button to wake up the computer)

DPI

1. DPI gear: 400/800/1600/3200/6400/26000. (Default 1600)
2. DPI switching: Click the DPI switching button at the bottom of the mouse to cycle through six ranges of DPI.
3. DPI gear save: Automatically save the current gear after switching to the DPI gear for about 15 seconds.

CHARGE

• When the indicator light flashes red, please charge the mouse promptly.
• Connect the mouse to the computer through the equipped USB cable to charge the mouse. During the charging process, the indicator light will flash orange and light off when fully charged.

CHARGING INSTRUCTIONS

1. It is recommended to only use the computer USB interface to charge the mouse;
2. Do not use a fast-charging mobile phone charger to charge the mouse;
3. Do not use inferior non-standard power adapters to charge the mouse;
4. Do not use an overvoltage and overcurrent power adapter to charge the mouse;
5. Please stay away from high-temperature equipment when charging;
6. Please turn off the power switch when not in use for a long time.

The above charging instructions also apply to other devices with charging functions (keyboard/mouse/headphones/speakers, etc.)

SPECIFICATIONS

• Model: MCHOSE AX5
• Connectivity: Wireless / 2.4 Ghz / Wired
• Rated input: 5V = 0.5A
• Charging interface: Type-C

FCC STATEMENT

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

WARRANTY CARD

Thank you for purchasing our company’s products. If there are any quality issues with the products during the warranty period, please contact us. Please provide this warranty card when contacting us so that we can provide you with comprehensive after-sales service.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>