MCHOSE G98 Mechanical Keyboard User Guide

MCHOSE G98 Mechanical Keyboard

Mode switch:

• Keyboard turning off : Switch the toggle to (OFF) and unplug the cable to disconnect.
• Keyboard return rate: Wired mode 1000Hz, 2.4GHz mode 1000Hz, wireless mode 125Hz.
• Attention : The images in this manual are all schematic diagrams and may deviate from the actual product. Please refer to the actual product for accuracy.

2.4GHZ CONNECTION

• Manual pairing dongle: Switch the toggle to the position (2.4G) to enter 2.4GHz mode. Press (FN+~] and hold for 3 seconds.
• The indicator will quickly flash GREEN to enter the pairing mode. Plug the included dongle into the desired device. The indicator stays GREEN for 2 seconds and completes the 2.4GHz pairing.
• Note : When connecting to 2.4GHz, search first and then plug the receiver. The dongle is default paired.

WIRELESS CONNECTION

• G98 version: The wireless device names for channels 1, 2, and 3 are [MCHOSE G98 3.0) or [MCHOSE G98 5.0) •
• G98 PRO version: The wireless device names for channels 1, 2, and 3 are [MCHOSE G98 PRO 3.01 or [MCHOSE G98 PRO 5.01 .
• The combination key of wireless channel 2 is [FN+2@1, and the [indicator light] is blue;
• The combination key of wireless channel 3 is [FN+3#], and the [indicator light) is blue;
• Press the combination key and hold for about 3 seconds until the corresponding wireless channel indicator light flashes quickly, indicating that the keyboard has entered detect pairing or search mode, and can be paired and connected to the device;
• Press the combination key “Fn” + number keys “1! “, “2@”, or “3#” to switch devices.

Wired Connection

1. Switch the toggle to [OFF] to enter the wired mode.
2. Connect the cable to Type-C port of the keyboard.
3. Connect the cable to the USB port of the computer. The keyboard is ready to use.

POWER SAVING MODE
In wireless/2.4GHz mode, the mouse will go to Auto-sleep mode after 1 minute of sitting idle. Press any button to wake it up.

BACKLIGHT EFFECT

Press the “FN” +” \I” key combination to switch 15 RGB backlights and light off, a total of 16 lighting effects:
Following the flow (restoring default rear light effects), following the shadows, sinusoidal light waves, spinning windmills, colorful waterfalls, blooming flowers and wealth, game mode, off, Constant light mode, breathing mode, dreamy rainbow, ready to explode, strolling in the rain, button ripples, starry dots, an endless stream. In conjunction with the driver’s RGB lighting effect with music rhythm, there are 10 lighting modes to choose from under this lighting effect.

FN KEY COMBINATION DESCRIPTION (LIGHTING FUNCTION)

• Fn+Win=Lock/Unlock Win Key (In Windows systems, the indicator light remains on when the Win key is locked, and the Win key cannot be used).
• In the Windows system, if switching to Mac/iOS system mode, the Win and Left Alt keys will be swapped, and F1-F12 is the multimedia button function.
• Fn+1!=wireless device 1, short press to switch, long press for 3 seconds to pair.
• Fn+2@=wireless device 2, short press to switch, long press for 3 seconds to pair.
• Fn+3#=wireless device 3, short press to switch, long press for 3 seconds to pair.

WINDOWS SYSTEM: FN KEY COMBINATION INSTRUCTIONS (MULTIMEDIA FUNCTIONS)

In the Windows system. after switching to the Mac system. the Win and Left Alt kevs will be swapped.

ANDROID SYSTEM: FN KEY COMBINATION INSTRUCTIONS (MULTIMEDIA FUNCTIONS)

In the Windows system, after switching to the IOS system, the Win and Left Alt keys will be swapped.

POWER DISPLAY

In 2.4GHz/wireless mode (without USB inserted), the RGB ambient light bar can display the keyboard battery level by pressing FN+B. When fully charged, it will be displayed in green. As the battery level decreases, the green color will gradually decrease, and when low, it will be displayed in red.

CHARGING

Connect the keyboard to the computer through the equipped USB cable to charge the keyboard. During charging, the RGB ambient light strip flash flowing. When the keyboard is fully charged, the light will stay GREEN. When the ambient light bar stays RED, please charge the keyboard on time.

SPECIFICATIONS

• Product model: G98 / G98 PRO
• Connectivity: wireless/2.4GHz/Wired
• Charging interface: Type-C
• Charging voltage/current: DC 5V =-= 1.5A

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

CHARGING INSTRUCTIONS

1. It is recommended to only use the computer USB interface to charge the keyboard;
2. Do not use a fast charging mobile phone charger to charge the keyboard;
3. Do not use inferior non-standard power adapters to charge the keyboard;
4. Do not use an overvoltage and overcurrent power adapter to charge the keyboard;
5. Please stay away from high-temperature equipment when charging;
6. Please turn off the power switch when not in use for a long time. The above charging instructions also apply to other devices with charging functions (keyboard/mouse/headphones/speakers, etc.)

WARRANTY CARD
Thank you for purchasing our company’s products. If there are any quality issues with the products during the warranty period, please contact us. Please provide this warranty card when contacting us so that we can provide you with comprehensive after-sales service.

• Product model:
• User Name:
• Factory number:
• Warranty address:
• Purchase date:
• Warranty contact person:
• Purchase address:
• Salesperson:
• Contact phone number:
• Postal Code.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>