Weimei DS Holder User Manual

Weimei DS Holder

Product Specifications

• Wireless charging support
• Bluetooth connectivity
• Compatibility: iOS, iPadOS, macOS
• Lithium battery Manufacturer: DISIDUW

FAQs

• Q: Is the DS Holder waterproof?
  • A: The DS Holder is not waterproof. Avoid exposing it to water or moisture to prevent damage.
• Q: How can I reset the DS Holder to factory settings?
  • A: To restore factory settings, click the power button four times, then press and hold it for several seconds until you hear a ringtone and see a quick white light flash.
• Q: What should I do if my DS Holder malfunctions?
  • A: If you encounter any issues, contact customer support for assistance or refer to the warranty information for product defects.

Operating Instructions

DS Holder Operating Instructions

• To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended.

How to set up the locator

• First, make sure WiFi and Bluetooth are turned on

PRODUCT USING INSTRUCTION

Make the DS Lable discovered following the steps:

1. Press the power button for 3 seconds, after the ringtone rings and the Controlling light blinks in white, the DS Holder is ready.
2. Turn on the Apple “Find My” App, Click “Add Item”, then click “Other Supported Item”
3. Bring the DS Lable close to the iPhone, identify the locator, and then click “Connect”
4. Customize the “name” and “emoji” of the DS Lable, then the setting is complete.

How to remove the locator

1. Turn on the Apple “Find My” App, Click “Items”, then Swipe left on the item you want to remove.
2. After removal, DS Lable will sound a tone and a white light will flash.

How to charge the locator

DS Holder supports a wireless charging function, you can use a wireless charger to charge it.

1. Align the battery coil position with the wireless charger.
2. When the DS Holder starts charging, it will sound a bell and light a red light.
3. When the DS Holder is fully charged, it lights green, so please remove it from the charger.

Safe electronic disposal

• The earth is our common home and DISIDUW attaches great importance to protecting the cleanliness of the environment and avoiding its pollution.
• When your device reaches the end of its useful life, please dispose of it at your locale-waste center to be recycled and properly discarded.

How to restore the factory setting

• Click the power button four times, and then press the power button for some seconds long;
• When the ringtone sounds, the light flashes in white quickly. That is completed.

Warning

1. This product is not a toy or edible.
2. Obstacles or large metal objects can interfere with the Bluetooth signal.
3. This product has a built-in lithium battery. Please do not put this product directly on fire or any place near heat or fire. Otherwise, the product may be damaged malfunctioned, or even be dangerous.

Disclaimer

• This is neither an anti-theft nor an anti-lost device.
• This device provides the last detected location.

Limited warranty

• DISIDUW offers a one-year limited warranty against product defects, effective from the time of delivery.
• Product defects do not include those resulting from accidents, product modification, or failure to follow instructions for use.

Leather Care Tips

1. Keep dry and avoid damp environments to prevent leather mold.
2. Avoid direct sunlight to prevent aging, discoloration, and cracking.
3. Avoid contact with alcohol, vinegar, lemon juice, and detergents to prevent leather corrosion.
4. Use a damp towel or soft cloth to clean surface stains, then air dry in a ventilated area.

FCC

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>