FIFINE X3 Wireless Headset User Manual

: August 27, 2024
: fifine

Table of Contents

FIFINE X3 Wireless Headset
WIRELESS NOISE-CANCELING STEREO HEADPHONES
CHARGING
POWER ON
BLUETOOTH PAIRING
MULTI-POINT CONNECTION
RESET BLUETOOTH SETTINGS
VOLUME CONTROL
SPECIFICATION
WARRANTY
FCC Statement
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FIFINE X3 Wireless Headset

Dear Customer
Thank you for purchasing X3 Wireless Headphones!\ To use this product properly and safely, please read this user’s manual before using the unit. After reading this document, be sure to keep it in a safe place where it can be referenced at any time.

WIRELESS NOISE-CANCELING STEREO HEADPHONES

Detachable Microphone

CHARGING

Connect the headphones to the PC or power adapter (5V, 1A) (sold separately) using the included cable, and turn on the power
The indicator will light up and flash slowly in red. It takes 2.5 hours to charge from O to 100%. When fully charged, the indicator will turn white and stay on for 10 minutes before going out.
Unplug the USB cable

POWER ON

Press and hold the Power button for at least 2 seconds in a power-off state, you will hear the voice guidance saying “Power ON” from the headphones, and the indicator will light up in white for 2 seconds and then flash continuously

POWER OFF
Press and hold the Power button for at least 2 seconds to turn off the power, the indicator will turn from white to red after 1 second, then turn off. You can hear the voice guidance saying “Power OFF” from the headphones.

BLUETOOTH PAIRING

The indicator flashes white light quickly when the headphones is turned on for the first time, and the headphones automatically enters the Bluetooth pairing mode
Open your media device and enter the settings.
Turn on your phone’s Bluetooth and search for the headphones
Choose “fifine x3” from the list.
You will hear the voice guidance saying “Connected” from the headphones, which means the Wireless pairing is successful. The indicator will also turn white and flash every 5 seconds
If the headphones has been paired once, it will automatically connect with the previous device next time.
When the headphones is disconnected from your media device, you will hear the voice guidance saying “Disconnected” from the Headphones

MULTI-POINT CONNECTION

The multi-point connection allows you to connect your headphones with two different devices via Wireless simultaneously.

After turning on the headphones, pair the headphones with the first device
Turning off the headphones, press and hold the Power button for at least 5 seconds to turn on the headphones again and enter multi-point pairing mode, then pair the headphones with the\ second device.
Reconnect to the first device by selecting the headphones from the Bluetooth device list.
Enjoy the convenience of the multi-point connection

RESET BLUETOOTH SETTINGS

Press and hold the Volume button and ANC button for at least 3 seconds (white light stays on for 2 seconds).
All Bluetooth settings will be deleted.

PLAYING

Make sure the headphones and media device are connected, then open the music app, press the Power button to play or pause the music.
Press the Power button two times to play the next song.
Press the Power button three times to play back the previous song.

VOLUME CONTROL

Press the Volume Control to turn up the volume.
Press and hold the Volume Control to turn down the volume

CALL ANSWERING

Make sure the headphones and mobile phone are connected. When a call comes in, press the Power button to answer it. When you finish the call, press the Power button again to end it.
Press and hold the Power button for at least 1 second to reject the call.

ANC Mode ON
Press the ANC button in a power-on state, until you hear the voice guidance saying “ANC On” from the headphones. It will keep you away from the outside noises.

ANCModeOFF
Press the ANC button in a power-on state, until you hear the voice guidance saying “ANC Off” from the headphones

Transparency Mode:

Press and hold the ANG button until you hear the voice guidance
saying “Transparency Mode” from the headphones. It will reduce the
the volume of the music and let you hear your surroundings without taking off the headphones.

Temporary Transparency Mode:

When the headphones is connected, press and hold the Right
Touchpad to turn on transparency mode. It will reduce the volume of
the music and let you hear from your surroundings without taking off
the headphones. Release the Right Touchpad to turn off transparency mode

Bass Mode:
off transparency mode When the headphones is connected and in the ANC on state, quickly tap the Right Touchpad twice to turn on / off the bass mode.

Gaming Mode:
When the headphones is connected, and the headphones is not in a call state, quickly tap the Right Touchpad three times to turn on the gaming mode. You will hear the voice guidance saying “Gameplay Mode” from the headphones.

CONNECTING TO OTHER AUDIO DEVICES WITH 3.5MM CABLE
Use the included 3.5mm cable to connect the headphones to the device you like to play your audio

SPECIFICATION

Model Number: X3
Connection Type: Wireless / 3.5mm
Frequency Range: 20 Hz – 20 kHz
Impedance: 32Q±15%
Charging Voltage Range : DC 4.8-6.2V
Charging Electric Current: <450 mA
Battery Capacity: 600mAh
Usage hours: When connecting via the Wireless device
Music playback time: Max. 33 hours (100% volume)
Communication time: Max. 40 hours
Standby time : Max. 65 hours
Charging time: Approx. 2.5 hours
Operating temperature: 5 °C to 40 °C
Included items : Wireless Noise Canceling Stereo Headphones (1)
- USB-A to USB-C Cable (1)
- 3.5mm Audio Cable (1)
- Detachable microphone(1)

COMMUNICATION SPECIFICATION

Communication system: Wireless Specification version 5.3
Maximum communication range: Line of sight approx. 32.8ft / 1 Om
Frequency band: 2.4 Ghz band (2.4000 Ghz – 2.4835 Ghz)
Compatible Bluetooth profiles: A2DP / AVRCP / HFP / HSP

WARRANTY

Every Fifine product comes with a Limited Warranty that in normal use of product will be free of any defects in material or workmanship for a period of one year from its original date of purchase. For detailed warranty info, please refer to the warranty policy on our website, or contact us directly.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

CERTTFICA TION