Tulpar Notebook T7 Series Pro Gaming Laptop User Manual

Tulpar Notebook T7 Series Pro Gaming Laptop

Product Information

Specifications

• Dimension: 395.7263.630.05mm
• Weight: 2.5kg +/- 5%
• Processor: i7-12650H
• Graphic Card: 8 GB RTX 4060
• Memory: DDR4 3200MHz
• Display: 17.3″ 1920×1080, IPS/72% 144Hz
• I/O Ports:
  • DC-in x 1
  • USB Type A @Right side x 2
  • USB 3.2 (Gen1) x 1 (Power off mode support USB power, but w/o bc1.2 protocol)
  • USB Type A @Left side x 1: USB 2.0
  • USB Type C @Rear side x 1 USB 3.2 (Gen2) (Power off mode support USB power, but w/o bc1.2 protocol)
  • RJ45 x 1
  • HDMI x 1 (HDMI 2.1)
  • Mini DP x 1
  • Mic / Audio Combo x 2
  • Card Reader x 1 (USB 3 interface, SD/SDHC/SDXC, UHS-I speed Connecter: Full SD size)
• Audio: Realtek ALC256
• Speaker/Mic Input: x 1
• Keyboard: x 1
• Pointing Device: x 1

Product Usage Instructions

Safety Instructions

1. Avoid subjecting the computer to heavy pressure or strong impacts to prevent damage.
2. Ensure air vents are not covered or blocked to maintain proper ventilation.
3. Avoid direct sunlight exposure to keep the computer in optimal operating condition.
4. Avoid exposure to liquid, rain, moisture, and magnetic fields as they can affect device performance.

Regulations Information
To prevent hearing loss, it is recommended to listen to music at safe volume levels and for limited durations.

FCC Information
To comply with FCC regulations, follow the guidelines on antenna orientation and equipment separation.

Conventions For This Manual
Follow caution messages for safe operation and note special information for specific situations.

Regulations Information

CE compliance
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and ofce. The CE-mark approves the conformity by the EU-guidelines:

• – EMC Directive 2014/30/EU,
• – Low Voltage Directive 2014/35/EU(equals A2 : 2013),
• – RF Directive 2014/53/EU

Rechargeable Battery Notice
Do not

1. Throw into fire or a hot oven, or mechanically crush or cutting of a BATTERY
2. Throw or immerse into water
3. Heat to more than 60°C
4. Repaire or disassemble
5. Leave in an extremely low air pressure environment
6. Leave in an extremely high-temperature environment

A power cord is connected to a socket-outlet with earthing connection. The unit can be operated at an ambient temperature of max. 35°C (95°F). Do not subject it to temperatures below 5°C (41°F) or above 40°C (104 °F).

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. PREVENTION OF HEARING LOSS

CAUTION : Listening to music at high volume levels and for extended durations can damage one’s hearing. In order to reduce the risk of damage to hearing, one should lower the volume to a safe, comfortable level, and reduce the amount of time listening at high levels. Headsets should comply with EN 50332-2 requirements.

FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment  does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION : Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

Safety Information

1. Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer’s components or otherwise cause it to malfunction.
2. Never cover or block the air vents including those located at the base of the computer. Never cover your computer or AC adaptor with any object.
3. To keep your computer in prime operating condition, protect your work area from direct sunlight.
4. Do NOT expose to or use near liquid, rain, or moisture. Do NOT use the modem during electrical storms.
5. Do not use or expose this device around magnetic felds as magnetic interference may affect the performance of the device.

Conventions For This Manual

• CAUTION : This message contains important information that must be followed for safe operation.
• NOTE : This message contains information for special situations.

Getting To Know The Basics

Product Specification
This User’s Manual provides technical information of instructions and illustra-tions on how to operate this notebook for the customer. Please read this manual carefully before using this notebook.

Physical Characteristic

Dimension Weight| 395.7263.630.05mm

2.5kg +/- 5%

Processor – CPU
Support Processor| i7-12650H
Graphic Card – GPU
Graphic Card| 8 GB RTX 4060
Memory
RAM| DDR4 3200MHz
Display
LCD| 17.3” 1920×1080, IPS/72% 144Hz
I/O Port
DC-in USB| x 1

USB Type A @Right side x2

USB 3.2 (Gen1) (Power off mode support USB power, but w/o bc1.2 protocol)

USB Type A @Left side x1: USB 2.0 USB Type C @Rear side x1

USB 3.2 (Gen2) (Power off mode support USB power,but w/o bc1.2 protocol)

I/O Port

RJ45 **** x 1

HDMI **** x 1 (HDMI 2.1)

Mini DP **** x 1

Mic / Audio Combo **** x 2

Card Reader **** x 1 USB 3 interface, SD/SDHC/SDXC, UHS-I speed Connecter: Full SD size

Audio
Codec: Realtek ALC256 Speaker/Mic| Azalia standard support, D3 mode support Build-in 2 speakers, Speaker : 2W/each Digital Microphone support
Input
Keyboard| Membrane single zone RGB backlight support,
 | 340109.23.6mm
Pointing Device| TD1470 TP mylar, Enable/Disable area :10mmx10mm, Palm
 | Rejection: Support Controller IC change to 1836, support
 | Windows update
Communication Port
LAN

Wireless LAN +BT

| Supports 10/100/1000 Mb/sec, PCI-E interface, Power Down Mode D1~D3 support, PCIe ASPM L1.1, L1.2 support, UI for network package management

INTEL AX201

Webcam
HD Webcam| HD webcam with D-MIC*1
Power
AC Adapter| Automatics Voltage adjustment between 100 and 240VAC
 | 50/60Hz, 230 Watts (19.5V/11.8A)3 Pins
Battery| Li- polymer Battery, SW Gas Gauge IC, soft pack
 | 4 cells (4s1p 4100 mAh) 62Wh

CAUTION : MODEL IS DESIGNED TO USE WITH THE DC INPUT: 230 Watts (19.5V/11.8A)3 Pins

Preparing your Computer

1. Connect the AC adaptor’s DC output plug to the DC IN jack.
2. The display panel can be opened to a wide range of angles for optimal viewing.
3. Press the power button to turn on your notebook computer.

Product Overview

Please become familiar with each component before you operate the computer.

Top-Open View
NOTE: The product’s color/ LED color, I/O port, indicator location, and specification will depend upon the actually shipping product.

1. Webcam
   A device that allows you to record video or take photographs with your computer.

2. Camera Status LED
   The Camera Status LED shows the Camera status.

3. Microphone
   Built-in microphone

4. LCD Screen
   Displays of your notebook computer.

5. Caps Lock Status LED

   • Default : ON (White)
   • Charging / Battery Indicator
   • Charging (Power On): White
   • Charging (Power off) : White
   • Battery low ( <6%): White (3 Sec/Cycle)
   • Charging finish: Off
   • Power off : Off

6. Power Button
   Press this button to turn the computer’s power on or off.

7. Turbo / Balance / Office Mode Switch

   • Office mode: OFF (Default)
   • Balance mode: White (Bottom light)
   • Turbo mode: Both white (All lights)
     CAUTION : When you are not using the computer, keep the LCD screen closed to protect it from dust.

8. Keyboard
   The keyboard provides keys with comfortable travel (The keyboard legend will depend on the spec/region).

9. Touchpad LED indicator/ Touchpad switch
   Please refer to the description at the end of the manual.

10. Touchpad/Click pad
    Touch-sensitive pointing device which functions like the mouse.

Right Side View

1. Card Reader
   USB3 interface, SD/SDHC/SDXC, UHS-I speed

   • Connecter : Full SD size

2. USB Port
   Connects an USB device (such as USB Zip drive, keyboard or mouse) into this jack. With charging function.

3. Vents
   The thermal vents are designed to cool the internal components and avoid overheating.

Left Side View

1. Kensington® Lock Port
   To be secured using Kensington® Lock Port security products.

2. Vents
   The thermal vents are designed to cool the internal components and avoid overheating.

3. USB Port
   Connects an USB device (such as USB Zip drive, keyboard or mouse) into this jack. With charging function.

4. Mic In Jack
   Connects amplified speakers into this jack.

5. Audio Combo
   Connect the 3.5mm audio combo jack/ headphones to this port.

Bottom Side View
NOTE The product’s thermal vent will depend upon the actually shipping product.

1. Vents
   The thermal vents are designed to cool the internal components and avoid overheating.

2. Speaker

CAUTION:
To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation.

Compartment View
NOTE Specification will depend upon the actually shipping product.

Front Side View

Back Side View

1. Vents
   The thermal vents are designed to cool the internal components and avoid overheating.

2. Mini Display Port
   Supports high-defination digital video connection.

3. USB Port Type C
   Connects an USB device (such as USB Zip drive, keyboard or mouse) into this jack.

4. HDMI port
   Connected to the screen, or home theater system.

5. Network Jack
   This jack lets you connect to a LAN.

6. Power Connector
   Connects the AC adapter into this connector.

Getting Started

AC Adapter
Please be noted that it is strongly recommended to connect the AC adapter and use the AC power while using this notebook for the first time. When the AC adapter is connected, the battery is being charged immediately. Attach the AC adapter when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power.

Note that the AC adapter included in the package is approved for your notebook; using other adapter model may damage either the notebook or other devices attached to it.

CAUTION:
The use of inferior extension cords may result in damage to your notebook. Your notebook comes with its own authorized AC adapter. Use of a different AC adapter or cable extension which is not authorized for use will void warranty protection if damage to hardware is found in association to said adapter or extension cable.

NOTE: The power adapter can become hot when in use. Please be sure the AC adapter is not covered with any materials keep it away from exposed parts of your body. The AC adapter appearance may vary depending on your region.

Knowing The Keyboard
The following define the colored hot keys on the Keyboard. The colored command can only be accessed by frst pressing and holding the function key while pressing a key with a colored command.

NOTE: The number of keys available on your keyboard will depend on the country/region in which the keyboard was designed and built.

For Keyboard Users
To activate these functions, press the hot key associated with the desired function as below :

Using the touchpad / clickpad
The touchpad / clickpad is a rectangular electronic panel located just below your keyboard. Click twice left corner will open or close (light) touchpad functionality. You can use the static-sensitive panel of the touchpad / clickpad and slide it to move the cursor. You can use the buttons below the touchpad as left and right mouse buttons. Press the left and right buttons located on the edge of the touchpad / clickpad to make selections and run functions. These two buttons are similar to the left and right buttons on a mouse. Tapping on the touchpad / clickpad produces similar results.

BIOS Setup

About BIOS Setup

1. When To Use Bios Setup?
   You may need to run the BIOS Setup when:

   • An error message appears on the screen during the system booting up and is requested to run SETUP.
   • You want to change the default settings for customized features.
   • You want to reload the default BIOS settings.

2. How to Run BIOS Setup ?

   • To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST procedure.
   • If the message disappears before you respond and you still wish to enter Setup, either restart the system by turning it OFF and ON, or simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
   • Be noted that the screen snaps and setting options in this chapter are for your references only.The actual setting screens and options on your Notebook may be different because of BIOS update.
   • The setup function only can be invoked by pressing [Del] or [F2] key during POST that provide a approach to change some setting and configuration the user pre-fer, and the changed values will save in the NVRAM and will take effect after the system rebooted. The setup uses a menu interface to allow the user to configure their system and the features are briefly listed as follow.
   • Press [F7] key for Boot Menu.

NOTE The drivers, BIOS and utilities bundled in the support DVD may vary by models and are subject to change without notice.

BIOS Setup Menu
Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. Select the tags to enter the other menus.

• Main Menu

  • Show system overview about memory size and setting of system time and date. Advanced Menu
  • To select the XD feature enable or disable XD feature only work with Intel plat-form + Windows.

• Security Menu
  Install or clear the password settings for supervisor and user.

• Boot Menu
  Configure Settings during System Boot.

• EXIT Menu
  Save or discard the changes before leaving the BIOS Setup Menu.

Main Menu

• System Time
  This item allows you to set the system time. There is a small internal (CMOS) bat-tery which is designed to maintain your system clock. It is designed to maintain time even when the PC is powered down or in sleep mode. The time format is [hour:minute:second]. Use [+] or [-] to configure system Time.

• System Date
  This item allows you to set the system date. The date format is [day:month:date:year]. Use [ENTER], [TAB] or [SHIFT-TAB] to select a field.

  • Day Day of the week, from Sun to Sat, which is determined by BIOS (read-only).
  • Month (Month) The month from 01 (January) to 12 (December).
  • Date (Date)date from 01 to 31.
  • Year (Year) The year can be adjusted by users.

• Total Memory
  This allows you to see the total amount of memory.

Advanced Menu

• Operating system support [UFEI OS]: If will support UEFI mode compatible operating systems.
• NVME device: AHCI NVME SSD info will be displayed.
• Intel Virtualization Technology: When enabled, VMM can take advantage of additional hardware features provided by Vanderpool technology.
• Operating mode (optional): Enable Office Mode / Balance Mode / Turbo Mode.

Security Menu

Change Administrator Password
When this item is selected, a message box shall appear on the screen as below:

Enter New Password

Type a maximum of 20-digit password and press [Enter]. The password typed now will replace any previously set password from CMOS memory. You may also press [ESC] to abandon new password setting. It is extremely important to keep record for any BIOS password which is set as it can not be reset even with the removal of a CMOS battery for the security of your PC. Select Change User Password to give or to abandon password setting same as Change Administrator Password item above.
Note that Administrator Password field allows users to enter and change the settings of the BIOS SETUP UTILITY, while User Password field only allows users to enter the BIOS SETUP UTILITY without having the authorization to make any change. The Password Check item is used to specify the type of BIOS password protection that is implemented. To clear a set Administrator Password/ User Password, just press [Enter] under Change Administrator Password/ Change User Password field when you are prompted to enter the password. A message box will pop up confirming password will be disabled. Once the password is disabled, the system will boot and user can enter setup without entering password.

Key Management:
Enables expert user to modify Secure Boot Policy variables without full authentication.

Boot Menu

Boot Configuration: Configure Settings during System Boot.

• Set Boot Priority (1st/2nd/3rd/….. Boot) Specifes the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu.
• Hard Disk Drive / USB Hard Disk Drive Specifes the Boot Device Priority sequence.

Exit Menu

• Save Changes and Reset
  Exit system setup after saving the changes. F10 key can be used for this operation.

• Discard Changes and Exit
  Exit system setup without saving any changes. ESC key can be used for this operation.

• Restore Defaults
  Restore/Load Defaults values for all the setup options. F9 key can be used for this operation

FAQ

Q: How can I ensure the longevity of my device?
A: Avoid exposing the device to heavy pressure, liquid, direct sunlight, and magnetic fields. Always maintain proper ventilation and handle with care.

Q: What should I do if I experience audio issues?
A: Check the audio settings on your device, ensure proper connections, and consider updating audio drivers if necessary.

References

• Your request has been blocked. This could be due to several reasons.
• Microsoft Support
• Microsoft Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>