SONGJUNG DD7602H Basic 15 Channel Tilting Emitter Instructions
- August 26, 2024
- SONGJUNG
Table of Contents
SONGJUNG DD7602H Basic 15 Channel Tilting Emitter
OVERVIEW
Technical Specification
WARNING
- The emitter couldn’t be exposed to moisture or be struck heavily or else the emitter’s life will be affected.
- If the emitter is not so sensitive or the radio range becomes shorter, please check whether to change the battery.
- It’s forbidden to use different type battery to avoid any dangerous risk.
- Dispose of used batteries properly.
Jog / Tilt Mode
The jog up and jog down buttons only control the channel where the current
emitter is located.
Lock / Unlock Combo-key Operation
The factory default is unlock status. When the combo keys are locked, if you
press the combo keys, the emitter won’t send any signal.
Battery Check Function
Motor Percentage Running
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 5 mm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Industry Canada Statement
This device complies with RSS-247 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Industry Canada Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 5 mm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>