veratron VL Flex Series ViewLine Flex Gauge Owner’s Manual
- August 26, 2024
- veratron
Table of Contents
veratron VL Flex Series ViewLine Flex Gauge
Product Usage Instructions
Installation:
Follow the installation guide provided in the manual to set up the VL FLEX
SERIES device securely in your vehicle or desired location.
Configuration:
Use the Configurator Smartphone App to customize the display layout, alarms,
and other settings according to your preferences.
Display Layout:
You can choose between single or dual layout display options to view different
data simultaneously on the instrument.
Data Monitoring:
The VL FLEX SERIES supports various data inputs such as fuel level,
speedometer readings, battery status, engine parameters, and more for
comprehensive monitoring.
Battery Monitoring System:
If using the VL Flex IBM Kit, benefit from continuous monitoring of battery
status including voltage, current, temperature, state of charge, and battery
health.
All-in-one / universal / contactless device configuration / all-rounder
GENERAL FEATURES
- 52 mm instrument with 1.44″ TFT display
- 2 instruments in 1 with dual screen
- Wireless configurable with your smartphone
- Powerless configuration
- Custom alarms setup
- Color bar graphs for visual data display
- 9 different styling rings available
The VL Flex device can easily be configured to be the instrument you need – thanks to its sun-readable 1.44″ TFT display embedded into a standard 52 mm instrument housing. The supported analog inputs allow you to directly read from your engine sensors, and the NMEA 2000® or J1939 interface expands this possibility by allowing the device to read from the digital network. The simple but effective graphic design can be set up in a single or dual layout, presenting the data in a clear and intuitive form, while the colored bar graph and the alarm display allow you to visually understand your data.
CONFIGURATOR SMARTPHONE APP
- To configure the VL Flex, some parameters must be calibrated, like the gauge type, the sensor and its calibration or the warning threshold. This is possible through the »VL Flex Configurator« smartphone App.
- A simple and detailed explanation of the configuration process is also available as in-app instructions.
- Thanks to the passive embedded NFC receiver, the VL Flex 52 can be configured without power supply.
TECHNICAL DATA
DISPLAY LAYOUT
VL Flex combines two instruments in one,is cost-saving and practical
art. nr. B00111301 (white)
art. nr. B00043501 (Black)
NMEA 2000®
The supported analog inputs allow you to directly read from your engine sensors. In addition NMEA 2000® and LIN 2.0 interface expands this possibility by allowing the device to read from the digital network.
FEATURES
- NMEA 2000 interface
- Resistive and frequency inputs
- IBS port for Battery monitoring
art. nr. B00110901 (white)
art. nr. B00086001 (Black)
J1939
The supported analog inputs allow you to directly read from the sensors.
In addition, the J1939 and the LIN 2.0 interfaces make it possible for the VL
Flex to read from the digital networks as well.
FEATURES
- SAE J1939 CAN interface
- Resistive and frequency inputs
- IBS port for Battery monitoring
art. nr. B00084701 (12V Version)
art. nr. B00084801 (24V Version)
IBM
The Intelligent Battery Monitoring System informs you about the current energy
status, allowing you to plan your energy supply making it the key element of
the vehicle’s energy management.
FEATURES
- Flex display kit for Battery monitoring
- 1x Resistive input for Fuel or
- Fresh Water level
- Dedicated harness with pushbutton for screen scrolling
SUPPORTED DATA
J1939 SPNS
art. nr. B00084701 (12V Version) / B00084801 (24V Version)
VL Flex IBM Kit
- Includes: VL Flex 52 instrument, Intelligent Battery Sensor (IBS) (incl. Battery pole adapter), 6-meter long wiring harness
- Delivered Data: Voltage, Current, Battery temperature, State of charge,Battery health, Autonomy
- Benefits: Ready for connecting to Veratron dip-pipe liquid level sensors, Continuous monitoring of battery status, Support of battery maintenance, Easy configuration with the mobile app
Frequently Asked Questions
Q: Can I use the VL Flex with liquid level sensors?
A: Yes, the VL Flex supports connecting to Veratron dip-pipe liquid level
sensors for monitoring various liquid levels.
Q: How do I configure custom alarms on the VL Flex?
A: Use the Configurator Smartphone App to set up custom alarms based on
your preferences and requirements for timely notifications.
Q: What is included in the VL Flex IBM Kit?
A: The VL Flex IBM Kit includes the VL Flex 52 instrument,Intelligent
Battery Sensor (IBS), battery pole adapter, and a 6-meter long wiring harness
for easy installation and setup.
OUTDOOR INSTRUMENTATION ENGINEERED IN SWITZERLAND
Veratron AG / Industriestrasse 18 / 9464 Rüthi / Switzerland
T +41 71 7679 111
The information provided in this brochure contains only general descriptions or performance characteristics, which do not always apply as described in case of actual use or which may change as a result of further development of the products. This information is merely a technical description of the product. It is not meant or intended to be a special guarantee for a particular quality or particular durability. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. We reserve the right to make changes in availability as well as technical changes without prior notice.