motorola XT2403 RAM GSM Unlocked International Version User Guide
- August 26, 2024
- Motorola
Table of Contents
motorola XT2403 RAM GSM Unlocked International Version
Product Specifications
- Model: XT2403-1/-2/-4/-5
- Features: Proximity Sensor, Microphone, Front Camera, Volume Buttons, Power Button, Fingerprint Sensor, SIM Card Tray, MainCamera ToF Lens, Telephoto Camera, Ultra-wide/Macro Camera, NFC Touchpoint Flash
- Wireless Charging: Yes
Product Usage Instructions
1. Inserting SIM Card and Powering On
- Insert the SIM tool into the tray hole to pop out the tray. Ensure you use the correct size SIM card without cutting it.
- Place the SIM card(s) with the gold contacts facing up and gently push the tray back into the slot.
- If using two SIM cards, turn the tray over for the second SIM slot.
- If your phone supports eSIM, contact your service provider for activation details.
- Press and hold the Power button to turn on your phone. Follow the on-screen prompts to set up your device.
2. Powering Off
To turn off your phone, simultaneously press the Power and Volume Up buttons.
3. Additional Information
For extended warranty coverage and features like accidental damage protection, consider Moto Care. Visit motorola.com/motocare (UK and Ireland only) for more details.
FAQs
Q: What should I do if my phone does not power on?
A: Ensure the battery is charged. Press and hold the Power button for an extended period to attempt a reboot. If the issue persists, contact customer support.
Q: Can I use a different size SIM card than recommended?
A: It is recommended to use the correct size SIM card to avoid any damage to the SIM card or the device. Cutting a SIM card to fit may cause issues.
OVERVIEW
XT2403-1/-2/-4/-5
Phone back
- Wireless Charging: Charge your phone using a Qi-certified wireless charger (sold separately).
- Use a headset: To use a headset, you’ll need one with a USB-C connector. If using a 3.5mm headset, you’ll need an adapter to connect a 3.5mm connector to USB-C. The headset and adapter may be sold separately.
Put in the card(s) & power on
- Insert the SIM tool into the tray hole to pop out the tray. Make sure you use the correct size SIM card and don’t cut the SIM card.
- 2 Insert the SIM card(s) with the gold contacts up, then gently push the tray into the slot.
- eSIM option: Your phone may have an eSIM (embedded SIM card) in addition to the physical SIM card. Contact your service provider for details if you want to activate and use it.
- 3 Press and hold the Power button to turn on your phone, then follow the prompts to get started. To turn off your phone, press the Power and Volume Up buttons at the same time.
MORE INFORMATION
Get answers, updates, and info:
- Help is here: From the home screen, swipe up and tap Settings > Help to learn how to use your phone and get support.
- Get more: Get software, user guides, and more at www.motorola.com/mymotoedge.
- Get apps: Tap Play Store to browse and download apps.
- Connect with 5G: 5G service plan and 5G network coverage required; available only in select areas; device not compatible with all 5G networks. Contact your service provider for details.
Caution: Screen protectors may reduce your phone’s touchscreen
sensitivity. Do not use screen protectors thicker than 0.5 mm.
Legal information. This guide provides important legal, safety, and
regulatory information that you should read before using your product. For the
complete legal information, from the home screen swipe up and tap Settings >,
then type Legal information, or visit www.motorola.com/device-
legal.
Water, splash, and dust resistance. Water, splash, and dust resistance
were tested to IP68 standards under controlled laboratory conditions.
Withstands immersion in up to 1.5 meters of fresh water for up to 30 minutes.
Resistance will decrease as a result of normal wear. Not designed to work
while submerged underwater. Do not expose to pressurized water, or liquids
other than fresh water. Do not attempt to charge a wet phone. Not waterproof.
For more about your phone’s water-repellent design and care, swipe up and tap
Settings > Help.
Charging and battery safety
To prevent possible burning and injury, the battery in your phone should only
be removed by a Motorola-approved service center or similar skilled personnel.
If your phone becomes unresponsive, press and hold the Power button until the
screen goes dark and your phone restarts. For fastest charging speeds, charge
your phone using a Motorola 125W (or higher) USB-C Power Delivery charger (may
be sold separately) and the USB-C to USB-C cable included in the box. Other
compatible chargers and cables may be used to charge the device. However, the
use of such chargers/cables is not recommended and may result in slower
charging speeds. Don’t charge your phone in temperatures below -20°C (-4°F) or
above 45°C (113°F). Chargers that do not comply with applicable national
standards may be unsafe, with a risk of death or injury, and may cause slow
charging or product damage. To view applicable standards and to learn more,
see the “Legal information” section of this guide, or visit www.motorola.com
/device-legal.
Warning about high volume usage. To prevent possible hearing damage, do
not listen at high volume levels for long periods. When your headset volume
reaches the high volume threshold, a warning shows. Tap OK to dismiss it, or
wait one to five seconds, then press the Volume Up button to dismiss the alert
and enable the volume to continue to be adjusted.
Disposal & recycling. For help recycling products and packaging
responsibly, visit
www.motorola.com/recycling.
Class 1 Laser. This device is classified as a Class 1 Laser product,
which is safe in normal use per IEC60825-1:2007 and IEC60825-1:2014. This
device complies with 21 CFR 1040.10 and 1040.11, except for deviations
pursuant to Laser Notice 50, dated June 24, 2007. Do not attempt to modify or
disassemble.
Extreme heat or cold. Don’t use your phone in temperatures below -20°C
(-4°F) or above 45°C (113°F). Don’t store/transport your phone in temperatures
below -20°C (-4°F) or above 60°C (140°F).
Legal disclaimers. Features, services, and applications are network-
dependent and may not be available in all areas; additional terms/charges may
apply. Product specifications and other information contained in this guide
are believed to be accurate at the time of printing or release. Motorola
reserves the right to correct or change any information without notice.
Arbitration. Your purchase is governed by a binding arbitration clause.
For more information and how to opt out, see the legal guide that came with
your phone.
SAR information (on e-label). To view specific absorption rate (SAR)
values for this phone, from the home screen swipe up and tap Settings > , then
type Regulatory labels, from your phone’s dial pad, type *#07# , or visit
www.motorola.com/sar.
Copyright & trademarks. MOTOROLA, the stylized M logo, MOTO, and the MOTO
family of marks are trademarks or registered trademarks of Motorola Trademark
Holdings, LLC. Google, Android, Google Play, and other related marks and logos
are trademarks of Google LLC. USB Type-C® and USB-C® are registered trademarks
of USB Implementers Forum. All other product or service names are the property
of their respective owners.
© 2024 Motorola Mobility LLC. All rights reserved. Product ID: Model
XT2403-1/-2/-4/-5) Manual Number: X-A.
- With moto care, extend your warranty coverage up to three years, and take advantage of features like accidental damage protection.
- Visit: motorola.com/motocare
- (UK and Ireland only)