Blackstar HT-5R MK III 12 Inch 5 Watt Tube Combo Amplifier User Guide

Blackstar HT-5R MK III 12 Inch 5 Watt Tube Combo Amplifier

Specifications

• Model: HT-5R MK III

• Power Output: 5 Watts RMS

• Mains Input: 120V ~ 60Hz, 220V-240V

• Speaker Outputs: 1 x 16 Ohm, 1 x 8 Ohm or 2 x 16 Ohm

• USB Audio: Stereo, fully processed guitar signal with speaker
  cabinet emulation and stereo reverb

• Footswitch Compatibility: FS-16

Product Usage Instructions

Setting Up

1. Connect the mains lead to the amplifier Mains Input.
2. Ensure the power outlet meets the voltage, power, and frequency requirements specified on the rear panel.
3. Plug your guitar into the Input socket.
4. Switch on the amplifier using the Power Switch.

Tone Selection

The Blackstar HT-5R MK III offers various tone options:

1. Clean Voice: Choose between ‘American’ or ‘British’ clean voice.
2. Overdrive Voice: Choose between ‘Classic’ or ‘Modern’ overdrive voice.
3. ISF Control: Blend your EQ between UK and American sound using Blackstar’s patented ISF control.

Output and Connectivity

• Power Reduction: Reduce output stage power from full to 10% power.
• USB Audio: Connect to a computer for the stereo signal with speaker emulation and reverb.
• Speaker Outputs: Connect speakers based on the specified impedance ratings to avoid amplifier damage.
• Effect Loop: Connect external devices for effects processing at professional or guitar levels.

CabRigTM and Footswitch

Utilize the CabRigTM settings for DSP speaker simulation and control channel and voice with the FS-16 footswitch.

Frequently Asked Questions (FAQ)

• Q: Can I connect headphones to the amplifier?
  A: Yes, you can connect headphones using the stereo LINE OUT with a TRS cable for private listening.

• Q: How do I save custom presets on the amplifier?
  A: Use Blackstar’s Architect software to deep edit, load, and store your favorite settings on the amplifier.

• Q: What is the purpose of the ISF control?
  A: The patented ISF control allows you to blend EQ settings between UK and American sound characteristics for tonal flexibility.

SET- UP GUIDE
Congratulations on buying this Blackstar HT-5R MK III amplifier
Your HT-5R MK III is an innovative valve amp with amazing boutique cleans and super high-gain overdrives. Its flexible two-channel design with patented ISF and pro features will give you inspiration from practice to performance.

GET TING STARTED

1. Connect the mains lead to the amplifier Mains Input. WARNING: The power lead should only be connected to a power outlet that is compatible with the voltage, power, and frequency requirements stated on the rear panel. If in doubt get advice from a qualified technician.
2. Plug your guitar into the Input socket.
3. Switch your amplifier on using the Power Switch.

SETTING UP

1. CLEAN
   Use this switch to choose between an ‘American’ or ‘British’ clean voice.

2. OVERDRIVE
   Use this switch to choose between a ‘Classic’ or ‘Modern’ Overdrive voice.

3. CHOOSE YOUR SOUND
   Blend your EQ between a UK and American sound, using Blackstar’s patented ISF control. ****

4. REVERB
   With the REVERB control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb. Avec le potentiomètre REVERB complètement tourné à gauche, il n’y a pas de reverb. Tourné vers la droite, le potentiomètre augmente le niveau de reverb.

5. POWER REDUCTION
   This switch reduces the output stage from full power down to 10% power.

GET CONNECTED

1. SPEAKER OUTPUTS

2. CABRIG™ OUTPUT
   Use the stereo LINE OUT to connect to headphones or a mixer using a TRS cable. The balanced XLR can be used to connect directly to the ‘Front of House’ or an interface. Use the CabRig™ switch to select from 3 different customizable presets. Deep edit, load, and store your favorite settings using our free Architect software.

3. EFFECTS LOOP
   Connect your external device to the mono effects loop, connecting SEND to the input of your device and the output of your device to the RETURN. Select between a professional equipment level (+4dBV setting), or guitar level effects such as effects pedals (-10dBV setting).

4. USB AUDIO
   Connect to a computer via this USB socket for a stereo, fully processed guitar signal complete with speaker cabinet emulation and stereo reverb .

WARNING: The output marked ‘1×16 Ohm’ should never be used at the same time as any of the outputs marked ‘1×8 Ohm or 2×16 Ohm’. Failure to correctly match the impedance of the amplifier and speakers will damage the amplifier.

THE NEXT LEVEL

FOOTSWITCH Footswitch your CHANNEL and VOICE with the supplied FS-16.
CabRig™ is our next-generation DSP speaker simulator that reproduces the sound and feel of a mic ‘d-up guitar cab in incredible detail. CabRig™ settings and presets can be edited and saved to your amplifier using Blackstar’s Architect software

AUDIO DRIVER & EXTRA FEATURES

WINDOWS – The Blackstar Amplification USB Audio Driver is required to work on Windows. Please download the driver by scanning the following QR code.
MAC – No installation of Audio Drivers is required. Connect your amp directly to your Mac to use as a plug-and-play audio interface. By scanning this QR code you can also find more information about additional features such as using the built-in tuner, editing and storing via the USB within the full ID:CORE online owner’s manual.

Please download the CE declaration of conformity for your Blackstar product at this address:

https://www.blackstaramps.com/declaration-of-conformity

Warning!
Important safety information!
READ THE FOLLOWING INFORMATION CAREFULLY. SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE! Follow all warnings and instructions marked on the product! Danger! High internal operating voltages.
Do not open the equipment case. There are no user-serviceable parts in this equipment. Refer all servicing to qualified service personnel. Clean only with a dry cloth. Condensation can form on the inside of an amplifier if it is moved from a cold environment to a warmer location. Before switching the unit on, it is recommended that the unit be allowed to reach room temperature. Unauthorised modification of this equipment is expressly forbidden by Blackstar Amplification Ltd. Never push objects of any kind into ventilation siots on the equipment casing. Do not expose this apparatus to rain, liquids or moisture of any type. Do not place this product on an unstabie trolley, stand or table. The product may fall, causing serious damage to the product or to persons! Do not cover or block ventilation slots or openings. This product should not be placed near a source of heat such as a stove, radiator, or another heat-producing amplifier. Use only the supplied power cord which is compatible with the mains voltage supply in your area. Power supply cords should always be handled carefully and should be replaced if damaged in any way. Never break off the earth (ground) pin on the power supply cord. The power supply cord should be unplugged when the unit is to be unused for long periods of time. Before the unit is switched on, the loudspeaker shoud be connected as described in the handbook using the lead recommended by the manufacturer. Always replace damaged fuses with the correct rating and type. Never disconnect the protective mains earth connection. High loudspeaker levels can cause permanent hearing damage. You should therefore avoid the direct vicinity of loudspeakers operating at high levies. Wear hearing protection if continuously exposed to high leveis. This product may be susceptible to electromagnetic interference. If this occurs take steps to limit interference.
If the product does not operate normally when the operating instructions are followed, then refer the product to a qualified service engineer. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures: Duration Per Day In Hours Sound Level dBA, Slow Response 1/2 ½ ¼ or less 90 92 95 97 100 102 105 110 115 According to OSHA, any exposure above the above permissible limits could result in some hearing loss. Ear plug protectors in the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.
All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

USA/Canada

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

“TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE”. “WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS”.

This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>