packard bell STAC9756T Discovery M-Board User Guide
- June 3, 2024
- packard bell
Table of Contents
Packard Bell Discovery M/Board
User Guide
Specification
- Audio: SigmaTel technologies SigmaTel STAC9756T audio codec
- Bios: AMI
- Chipset: Intel 845
- CPU Support :
- Socket mPGA 478B
- Supports Intel P4 FC-PGA2 (Flip-chip Pin Grid Array), 800 MHz to 2.4 GHz.
- Warning: Not all the above processors have been qualified.
- 100 MHz (x4 = 400 MHz) data bus support (Quad-Bumped technology).
- Form Factor : Flex-ATX 22.9 x 19.2 cm Form Factor
- I/O Controller : Winbond W83627HF-AW
- RAM :
- Supports 2 memory slots.
- Serial Presence Detect (SPD) support.
- Supports a maximum memory size of 1 GB (using 2 x 512 MB memory modules)
- Warning: Not all memory configuration qualified.
- Support only 3.3 V DIMM DRAM configurations.
- ECC DIMM support.
- 133 MHz SDRAM interface.
- STR power management support via self refresh mode using CKE.
Jumpers
Jumper|
Configuration
---|---
JBAT1 – Clear CMOS jumper| 1-2: Normal operation (default)
2-3: Clear current BIOS default settings
JP3 – Safe Mode/Recovery/Normal selection| 1-2: Normal (default)
2-3: Safe Mode (restores safe values / loads BIOS setup in maint. mode)
Open: Recovery (used only to flash a corrupted BIOS)
https://pb.retropc.se/discovery.html
11/4/22, 10:27 AM
Packard Bell Discovery Motherboard
Documents / Resources
|
packard bell STAC9756T Discovery
M-Board
[pdf] User Guide
STAC9756T Discovery M-Board, STAC9756T, Discovery M-Board, Bell Discovery
M-Board, Discovery M-Board, M-Board, Board
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>