Beghelli S2024-03 Strada Modula Lighting Instruction Manual
- August 26, 2024
- Beghelli
Table of Contents
Instruction Manual
S2024-03 Strada Modula Lighting
PRATICA MODULA THE
ADVANTAGES OF AN INTEGRATED MOUNTING ADAPTER
SEE
PRESENTATION VIDEO
https://www.beghelli.it/modula-video
PRATICA MODULA – MANY SOLUTIONS IN A SINGLE LUMINAIRE
DEVELOPMENT OF A NEW INSTALLATION CONZEPT
The use of luminaires from the MODULA series brings with it a significant simplification of the work procedure and thus leads to a considerable shortening of the required installation time with respective cost reduction. The possibility to be able to renounce conventional junction sockets stood in the center stage for the development of a whole new installation method – preventng conventional junction sockets and exchanging them by mounting adapters in two variants. Both mounting adapters offer many space for the entry of incoming and outgoing cables as well as their wiring. If required, the terminal block of the mounting adapters can be removed for a wiring without barriers. Precisely this property makes through wiring imaginably easy. Maintenance procedures have also been optimized – All luminaires can be latched out from the mounting adapter and are afterwards freely accessible.
TWO LUMINAIRES FOR DIFFERENT APPLICATIONS WITH SAME MOUNTING ADAPTERS
PRATICA MODULA
Variable escape sign and safety luminaire. Suitable for escape route and area
illumination as well as for escape route indication. 4 escape sign foils in
scope of delivery. Many accessories for escape route indication. Versions for
self-contained supply (LIFE) with up to 2.000 lm light flux in battery
operation (1 h) through subsidiary battery.
PRATICA MODULA MATRIX
Multifunctional safety luminaire with adjustable LED matrix (24 LEDs) in 4
different LED groups, local or per remote access. Suitable for escape route
and area illumination. Versions for self-contained supply (LIFE) with up to
2.700 lm ideational light flux in battery operation (1 h).
INSTALLATIONS IN IP65, IP42 AND IP40 THROUGH INTEGRATED MOUNTING
ADAPTER
The series Pratica Modula is delivered with a flat and a high mounting
adapter. Both mounting adapters serve as junction socket for wiring of the
incoming and outgoing cables – the choice of the cable entries on the mounting
adapter determines the type of protection (IP).
UP TO 50 % REDUCED INSTALLATION TIMES PER LUMINAIRE
Thanks to the MODULA system, the internal wiring and all settings are
enormously simplified and accelerated. The work steps for this take place on
the mounting adapter and on the backside of the luminaire – both components
are finally only latched into each other.
MANY CABLE ENTRIES
The flat mounting adapter is capable of 2 backward entries with gasket (M16),
2 backward drillable entries (max. 10 mm Ø) and 4 sideward breakable entries
(2x 15×7 and 2x 15×10 mm). The high mounting adapter is capable of 2 backward
and 6 sideward entries (M20) for cable glands – ideal for a on-finery
installation in IP65.
QUICK MAINTENANCE, WITHOUT OPENING THE LUMINAIRE
Through a simgle off-latching on the closing system, mounting adaper and
luminaire are separated again from each other – this enables a maintenance of
the luminaire, which can happen comfortable on a work surface.
PERFECT ALIGNMENT THROUGH INTEGRATED WATER LEVEL
Included in both in the flat and in the high mounting adapter, this element
offers right from the beginning of the installation a perfect comfort
regarding the fastening – easy, quick and always straight.
REMOVABLE TERMINAL BLOCK FOR WIRING COMFORT
The usable space can be expanded through the temporary removal of the terminal
block from the mounting adapter – particularly well suited for the wiring in
the cross section 2,5 mm² in combination with ad-ditional plug terminals.
THE MOUNTING ADAPTER – THE HEART OF THE MODULA SYSTEM
All luminaires of the MODULA series are including a flat and a high mounting
adapter in the scope of delivery. After installation of one of the two
components, the remaining mounting adapter can be used to cover the installed
mounting adapter during the building phase. Also this takes place through a
simple latching of both components into each other. The final latching of the
luminaire on the installed mounting adapter can thus take place time-delayed
in a separate work step without having to renounce temporarily to a contact
and foreign body protection.
- The flat mounting adapter is for under-finery installation.
- The high mounting adapter is for on-finery installation.
The terminal block contains an integrated plug fixture for contact making with the luminaire. Through additional plug terminals, all wires within the mounting adapter can be bundled and routed to the preinstalled terminal block. Both the terminal block and water level are temporarily removable to ease the wiring. The mounting adapters are furthermore used for accommodation of optional conversion sets, interfaces and subsidiary batteries.
- Luminaires of the MODULA series, which are factory-made suitable for Sicuro230 with circuit monitoring, can be used as well for Sicuro24 and Sicuro230 with single monitoring through additional conversion sets.
- Luminaires of the MODULA series, which are factory-made suitable for Autotest and CableCom, can be used as well for Logica, Logica FM and DALI through additional interfaces.
- Through a subsidiary battery, the light flux can be enormously increased in emergency operation with self-contained supply – up to 50 %.
Up to 50 % reduced installations time per luminaire
Bluetooth for direct communication with the luminaire, without having to
open it
THERE IS NO ALTERNATIVE FOR ENVIRONMENT PROTECTION
One of our responses to the preservation of limited resources is the
summarization of products. Among other things, we achieve this through a
design philosophy with focus on a universal usability. In doing so, we
summarize technical components with similar properties for different
applications. This reduction improves the ecological footprint in the
production process and helps to have shorter delivery times, for what our
customers thank us for. The MODULA series also arose from the desire to
develop the ultimate multipurpose luminaire. The name says it all –
„modularity“ with great versatility in the application. All luminaires of this
series can be installed in the simplest way…
- Choose desired mounting adapter as base – high or flat,
- wire mounting adaper, accommodate components from the accessories if necessary,
- make settings on the backside of the luminaire and latch luminaire onto mounting adapter,
…ready.
01 TWO DELIVERED MOUNTING ADAPTERS
The mounting adapters are development enhancements of common junction sockets.
They enable a through wiring with a variety of incoming and outgoing cables.
Problem-free use with cable pipes, cable conduits and cable glands. Flat
mounting adapter for under-finery installation. High mounting adapter for on-
finery installation. A type of protection up to IP65 can be realized depending
on the used entries.
02 SETTINGS ON LUMINAIRE
The luminaire does not have to be opened for this procedure. All settings are
made on the backside of the luminaire. Operating duration (1 h / 1.5 h / 2 h /
3 h) and operating mode (maintained mode or non-maintained mode) per jumper.
Product specific: brightness (in 4 steps) per DIP switch for central supply
with circuit monitoring.
LED matrix (in 4 LED groups) for Pratica Modula Matrix. Reset to factory
settings per pushbutton for self-contained supply.
05 SUBSIDIARY BATTERY
Available as accessory for the luminaire series Pratica Modula. Easy
connection on the backside of the luminaire, which does not have to be opened
for this procedure. The light flux in emergency operation can be increased up
to 50 % for self-contained supply (product specific). Reliable Lithium-Ferro-
Phosphate technology (LIFE) with 10 years guarantee.
06 ONE TERMINAL BLOCK FOR ALL
Depending on application:
– Monitoring and charging voltage, without or with cable bus (Powerline)
– Cable bus (DALI)
– Switch input (230 V / 50 Hz).
Over the switch input, the operating mode can be set as well or a switching
together with the general lighting can take place alternatively.
03 THREE ADDITIONAL INTERFACES
The variants for Autotest / CableCom can be used as well for Logica, Logica FM
and DALI through the additional interfaces. Easy connection through plugging
on the backside of the luminaire, which does not have to be opened for this
procedure. No additional wiring necessary.
04 TWO ADDITIONAL CONVERSION SETS
The variants for Sicuro230 with circuit monitoring can be used as well for
Sicuro24 and Sicuro230 with single monitoring through the additional
conversion sets. Easy connection through latching of a high mounting adapter
(delivered) on the backside of the luminaire, which does not have to be opened
for this procedure. The wiring takes place within the high mounting adapter.
07 DELIVERED FRAME BEZEL AND FOILS
Can be used as design element. Easy installation through latching with click-
closures on the backside of the luminaire. When using the backward entries,
the unused sideward entries can be covered through the frame bezel. Ideal for
under-finery installations in offices, schools, restaurants… Four escape sign
foils (self-adhesive) enable 1-sided escape route indication.
08 EXTENSIVE ACCESSORIES
Accessories to be ordered separately enable a variety of further mounting
types, additional protection against mechanical influences and rain as well as
1-sided and 2-sided escape route indication with escape sign covers and escape
sign display panes.
Rev.-No. S2024-03
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>