Shenzhen Qianyifeng Electronic Technology H3000 Bluetooth Sport Headphone Instructions
- June 5, 2024
- Shenzhen Qianyifeng Electronic Technology
Table of Contents
Shenzhen Qianyifeng Electronic Technology H3000 Bluetooth Sport Headphone
Parameter
- Product name :Bluetooth sports headphones
- Model:H3000
- Material:ABS+PC
- Transmission distance:10m
- Bluetooth Version: V5.0
- Battery capacity:120mAH
- Net weight:16.3g
- Input:5V=1A
- Frequency Range: 20-20000Hz
- Charging Time: about 1.5 hours
- Talking/Music time: about 10 hours
- .Standby Time :about 88 hours
Pairing method
- Press and hold the power button until the red and blue lights flash alternately.
- Turn on the phone Bluetooth search to Bluetooth name H3000
- Click pairing and wait for 3 seconds to link successfully.
Button Operation
- Pause/play:Short press
- Reject the call:Long press for 3 seconds
- Answer/hang up :Short press
- Volume – : Short press volume down/Hold press 3 seconds for Previous Song
- Volume + : Short press volume up/Hold press 3 seconds for Next Song
Safety Precautions
- Please don’t don’t put it in high(above 45℃)or low(under 0 ℃) temperature condition
- Please don’t use the indicator light to close to children or animals eyes
- Please don’t let it close to liquid and wet it ,otherwise it will cause the headset damage badly ,which these are not in guarantee
- Please don’t dismantle or modify the headset ,otherwise it will be possible to cause headset damage or burn ,which which these are not in guarantee
- Please don’t use the Bluetooth earbuds in thunderstorm weather,the thunderstorm maybe cause it work wrong, and increase the risk of electric shock
Note: If the long-term pairing is not successful,Please clear all pairing records before Bluetooth
on your phone,And refresh the phone Bluetooth interface,Re-search for “H3000” Bluetooth device name click Pairing
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.