PAKROMAN SA7ZW Automatical Coffee Maker Machine User Manual

PAKROMAN SA7ZW Automatical Coffee Maker Machine

Product Specifications:

• Model No: SA7ZW/SA7ZB
• Manufacturer: Pakroman North America Inc.
• Contact: info@pakroman.com
• Phone: +(1) 302 898 7673 / +(61) 413 928 118

Product Usage Instructions

Before Use

1. CHECKING THE MACHINE After removing the packaging, ensure the product is undamaged with all accessories. Do not use if damaged; contact Customer Services.
2. INSTALLING THE MACHINE
3. CONNECTING THE MACHINE 3.1 Ensure voltage matches rating plate value.3.2 Connect to properly grounded socket with min. current rating of 10A.3.3 Replace socket if needed by a professional.
4. CHECK TWICE BEFORE STARTING

Operating Instructions

1. POWER ON COFFEE MACHINE 1.1 Connect power cord to outlet to enter standby mode.1.2 Press power icon for self-testing and cleaning (about 3 minutes).1.3 Machine is ready when all icons are lit.
2. BASIC COFFEE MAKING Follow the icons for different types of coffee. Press selected function icon again to stop operation.

IMPORTANT: With proper installation, operation, and maintenance, your new machines will deliver reliable and cost-effective performance

Model No： SA7ZW/SA7ZB

SAFETY INFORMATION

The safety precautions listed here are important for your safety. Please follow them. The signs and their meanings are shown below.

Warnings

1. Ensure that the main power supply voltage matches the value indicated on the rating plate on the bottom of the machine.
2. Connect the machine to an effectively grounded and properly installed socket with a minimum current rating of 10A only.
3. If the power socket does not match the plug on the machine, have the socket replaced with a suitable type by a qualified professional.
4. Do not attempt to repair or modify the machine, as doing so will void the warranty. Repair should only be done by authorized service personnel.
5. Dispose of the plastic and bubble board in the package appropriately to avoid harming children.
6. Do not modify the technical settings of the machine, as this may cause serious harm, and we will not be responsible for any resulting damages.
7. The machine is not suitable for use by individuals with physical, emotional, or mental deficiencies, including children, unless they are under the direct supervision of a guardian.
8. Please take care to avoid water entering the machine and touching the electrical parts, as this may cause a short circuit.
9. Do not use the machine when there is a water shortage. When filling the water tank, please remove it from the coffee machine to prevent water from entering the machine, as any water that enters the interior can cause damage not covered by the warranty.

NOTE

1. To reduce the risk of fire or electric shock, do not remove the cover or exterior of the unit.
2. Keep the machine away from heat sources to avoid damage to its surface.
3. Please read and carefully preserve the instruction manual.
4. Keep the machine on a stable, dry, and ventilated desktop, out of the reach of children.
5. Understand the power specifications before using the machine, and connect the power according to the requirements.
6. The normal environmental temperature for use and storage is 0-45℃£®32℉ to +113℉),freezing temperatures may damage the machine.
7. Please use room temperature water in the water container, as hot water may damage the machine.
8. Please use a dry dishcloth to clean the machine.
9. Take out the brewing unit and wash each unit only when the machine is powered off.
10. Please send the machine for professional repair if it has a problem or if the electrical system is damaged.
11. If you will not use the machine for a long period, please power it off and disconnect the plug.

PRODUCT DESCRIPTION

PRODUCT PARTS DETAILS

TECHNICAL SPECIFICATION

CONTROL PANEL

BEFORE USE

CHECKING THE MACHINE

After removing the packaging, make sure the product is complete and undamaged and that all accessories are present.
Do not use the machine if it is visibly damaged. Contact Pakroman Customer Services.

INSTALLING THE MACHINE

ATTENTION
When installing the machine, please observe the following safety warnings:

1. The machine generates heat. After placing the machine on the worktop, ensure there is a space of at least 1.18 in / 3 cm between the machine’s surfaces and the side and rear walls, and a space of at least 5.9 in / 15 cm above the coffee maker.
2. Avoid placing the machine near taps or sinks to prevent water from penetrating the coffee machine and causing damage.
3. To prevent damage from freezing, do not install the machine in a room where the temperature could drop below freezing point.
4. Ensure that the power cord is arranged in a way that prevents it from being damaged by sharp edges or coming into contact with hot surfaces (e.g. electric hot plates).

CONNECTING THE MACHINE

1. Ensure that the main power supply voltage matches the value indicated on the rating plate on the bottom of the machine.
2. Connect the machine to an effectively grounded and properly installed socket with a minimum current rating of 10A only.
3. If the power socket does not match the plug on the machine, have the socket replaced with a suitable type by a qualified professional.

CHECK TWICE BEFORE STARTING

1. Please check and ensure that the brewing unit, dump container, and drip tray are in the correct positions and locked.
2. To further enhance your coffee and to boost your machine’s efficiency, it is recommed to fill the water tank with clean water.
3. Add more than 30g of coffee beans into the bean container for the first use.
4. The machine has been factory-tested with coffee, so it is completely normal to find traces of coffee in the grinder.
5. Upon first using the machine, it is necessary to brew 4-5 cups of coffee to begin achieving the desired quality.

OPERATING INSTRUCTIONS

POWER ON COFFEE MACHINE

1. Please connect the power cord to the outlet. Upon doing so, the machine will automatically enter stand-by mode,indicated by the illumination of the power icon.

2. Press the power icon to initiate the machine’s self-test and self-cleaning,this process would last about 3 minutes.
   ATTENTION
   Please refrain from operating the machine or opening the side door during the aforementioned processes.

3. Once all icons are lit, the machine is ready for use.

BASIC COFFEE MAKING

During the process, if you want to stop the operation,press the selected function icon again .

ATTENTION
After the coffee brewing process is complete, the brewing group will automatically return to its original position. Please wait for this process to finish before operating the coffee machine,do not press any button or open the door.

MILK FOAM

1. To begin, press the Hot Milk icon ,it will start to flicker, indicating the boiler is heating to steam temperature.
   Once the icon remains steadily lit, it signifies that the steam is ready for use.

2. Press the Hot Milk icon again to start steaming. Place the steam wand into the milk to create foam. To cease steaming, press the icon once more.
   ATTENTION
   Stay away from the steam wand after using the steam function as it will be hot!
   Perform a brief additional steaming to expel any milk left inside the steam wand. Afterwards, you can clean the exterior of the steam wand by using a cloth to wipe off any milk residue.
   

3. After completing the steam function, please press the hot water icon to initiate the machine’s automatic cooldown to the optimal coffee brewing temperature. During this process, the eight function icons will alternately flicker. Once they all remain steadily lit, the machine is ready to brew coffee.

GROUND COFFEE FUNCTION

1. Press the ground coffee icon on the control panel. When the espresso and coffee icons are lit brightly for an extended period, the machine will enter ground coffee mode. Then, add one scoop of ground coffee into the bean container hole. At the same time, select the coffee icon you prefer (espresso or coffee), and the machine will automatically brew the coffee.
2. Press the coffee icon you previously selected to stop the brewing process.

ATTENTION
After the coffee brewing process is complete, the brewing group will automatically return to its original position.
Please wait for this process to finish before operating the coffee machine,do not press any button or open the door.

CLEANING FUNCTION

1. Press the clean icon on the control panel,the machine will start the cleaning.
2. Press the clean icon again,stop the cleaning process.

ATTENTION
After the coffee brewing process is complete, the brewing group will automatically return to its original position.

Please wait for this process to finish before operating the coffee machine,do not press any button or open the door.

HOT WATER

Press the “hot water” button to dispense water from the steam wand (as shown in image 1). The default duration for water outlet is 60 seconds, and if you need to stop it, simply press the “hot water” button again.

If you haven’t cleaned the steam wand after using the milk function, it’s normal for some milk to come out together with the steam in the first 3 seconds.

ATTENTION

After the coffee brewing process is complete, the brewing group will automatically return to its original position.
Please wait for this process to finish before operating the coffee machine,do not press any button or open the door.

SETTINGS

COFFEE SETTING

1. Coffee power setting
   Press the On the control panel, will display the current powder volume. Press “+ or -” to adjust the powder volume within the range of 7-12g. Press the powder icon to confirm the settings and return to the main menu.

2. Coffee temperature setting:
   Press the on the control panel to display the current temperature. Use “+ or -” to adjust the temperature within the range of 75-95°C. Press the temperature icon to confirm the settings and return to the main menu.

3. Coffee Volume setting:
   Press the volume icon on the control panel to display the current volume. Use “+ or -” to adjust the volume. Press the volume icon to confirm the settings and return to the main menu.

DECALCIFICATION

1. Manually Decalcification
   To manually decalcify the machine when it is in standby mode, please add descaling detergent into the water container.
   Then, long-press the for more than five seconds to initiate the decalcification process. During this process, the and will flicker, and the machine will dispense 30ml of water from the steam wand and 30ml from the brewer, pause for 2 minutes, and complete 9 rounds with all indicator lights flickering. After changing the water in the container, please press the and the machine will automatically pump 200ml of clean water from the steam wand
   and 200ml from the brewer to finish the decalcification process.
   Note: The decalcification process will be stopped when you press

2. Automatically Decalcification:
   Once the volume reaches the set settings, all eight function lights will flicker(as shown image 2). Simply press any function icon to initiate the decalcification process, which is the same as the manual decalcification process described in section 2.1 The default setting is 20L, and you can adjust it using the “+ or -” buttons within the range of: OFF, 20L, 50L, 100L, 200L.

Press the and or more than five seconds to access the automatic decalcification volume settings.
Press any function icon to start the decalcification process, which is the same as the manual decalcification process described in section 1.2.

FACTORY RESET

When the coffee machine is powered on, continue pressing the ground coffee and the clean icon for 5 seconds. The indicator lights will flicker for 2 seconds and then return to the main menu, indicating that the factory reset is complete and the machine is ready for use.

RESETTING THE BREWING GROUP POSITION

If the brewing group is blocked in the middle position and cannot be removed from the coffee machine, and the warning icon indicates “brewing group missing,” please continue pressing this icon for 3 seconds. The brewing group will return to its original position.

Please refrain from operating the machine while the brewing group is returning to its original position.

ENERGY SAVING

If the machine hasn’t been used for 30 minutes, it will enter energy-saving mode. To use it again, simply press the power button .

The factory default setting is 0.5 hours, with an adjustable range from turning off to 0.5 hours, 4 hours, and 8 hours.
When the machine is powered on, long press the hot water icon and the hot milk icon together to enter the auto-turn off setting menu. Press the “+” or “-” buttons to adjust, then press the power icon to return to the main menu.

COFFEE POWDER FINENESS ADJUSTMENT KNOB

Please adjust the powder fineness while the grinder is working. If adjusted anti-clockwise, the powder size will be finer and the coffee taste will be stronger. If adjusted clockwise, the powder size will be coarser and the coffee taste will be weaker.

Note: After adjusting the powder fineness, the adjusted coffee effect will be noticeable from the third cup of coffee.

POWER OFF

Please press the power icon ,the machine will be powered off and enter standy- by mode.
The machine wolud start a self-cleaning process before shuting down,please wait for the whole process finished.

CLEANING AND MAINTENANCE

DAILY MAINTENANCE

1. Water Tank:
   The water tank should be cleaned daily. Fill it with fresh water before making coffee, and it’s best to keep the water temperature below 35°C and use pure water.

2. Brewing Unit:
   After daily household use, wash and clean the brewing unit. Under normal circumstances, use fresh water to clean it every two weeks. For restaurant use, it should be cleaned daily.

3. Coffee Machine Cleaning:

If you will not be using the machine for an extended period, please clean the dump container, drip tray, and every part of the machine to keep it clean.

BREWING UNIT MAINTENANCE

Method to Remove the Brewing Unit:

1. Open the side door and remove the waste coffee cake container and waste coffee powder container(image 3).2.

Hold the handle of the brewing unit,press down the ear of the funnel with your thumb, and then it can be drawn out M(image 4).

Method to Install the Brewing Unit:
The installation of the brewing unit is carried out in reverse order. When the sound “kata” is heard, it indicates that the brewing unit has been successfully installed. Next, put in the dump container and close the swing door.

TROUBLESHOOTING

WARRANTY

• Your satisfaction with our products is of utmost importance to us, which is why we offer a 30-Day Money-Back Guarantee along with a limited-year warranty. We take great pride in our customer service and unequivocally stand behind the quality of our products.
• The scope of our warranty includes any defects in materials and craftsmanship, excluding paint and finish, throughout the Warranty Coverage Period specified. This warranty is exclusively valid for the original consumer purchaser. Should you discover any defects in parts or products within the Warranty Coverage Period, and can provide proof of purchase, we will gladly replace the defective item at no extra charge.
• It is important to understand that our warranty does not extend to normal wear and tear, or damages incurred through mi suse, abuse, overheating, or unauthorized modifications. Any such alterations will resu lt in the immediate voiding of this warranty.
• Losses resulting from negligent operation fall outside the purview of PAKROMAN’s responsibility.
• Furthermore, our warranty does not extend to products damaged or rendered defective as a result of accidents, misuse, modification, water damage, neglect, improper handling or storage, inadequate maintenance or installation, third-party component integration, exposure to harsh weather conditions, or natural disasters, including but not limited to earthquakes, hurricanes, tornadoes, floods, lightning, or fires. Non-adherence to usage instructions also nullifies the warranty.
• Please be aware that while any warranties implied by law are limited to the express warranty period, certain states may not permit limitations on implied warranty duration, so this restriction might not apply to your circumstance.
• In the event of a defective product, your sole recourse is the repair or replacement of the item as stipulated in this warranty. We will not be liable for any special, incidental, or consequential damages arising from the purchase or use of our product, regardless of the legal basis of the claim. Note, some states do not permit the exclusion or limitation of incidental or consequential damages, so the aforementioned limitation or exclusion may not apply to you.
• This warranty confers specific legal rights upon you, and depending on the state, you may have additional rights.
• To ensure warranty service, please keep your original sales receipt from the authorized dealer as it is necessary to demonstrate proof of purchase. Unsanctioned returns without prior written consent will be disposed of without notice.
• For warranty service requests, please contact us by emailing info@pakroman.com. Our dedicated customer service team is at your dispo sal from Monday to Friday, 9 am to 5 pm PST.
  This warranty is applicable within the United States, Canada, and Mexico to products purchased from PAKROMAN or an authorized PAKROMAN retailer.

EXCEPTIONS

PAKROMAN products are sold without any performance warranty, either written or implied. The manufacturer cannot oversee the installation, operation, cleaning, or maintenance of its products. Therefore, our warranty does not cover any appliance that has not been installed, operated, cleaned, and maintained strictly according to the owner’s manual instructions.

This warranty does not extend to damage or breakage resulting from misuse, improper handling, or unauthorized modifications. Neither PAKROMAN nor any authorized PAKROMAN dealer shall be held legally responsible for any incidental or consequential damages to property or persons resulting from the use of our products. In the event of a warranty claim ®C regardless of whether it is based on this warranty, or any other warranty, either expressed or implied by law ®C PAKROMAN’s liability will not, under any circumstances, exceed the original purchase price of the product. Any and all warranties from PAKROMAN are expressly outlined herein, and no claims shall be made against PAKROMAN beyond what is specified in these terms.

FAQs:

Q: What should I do if the machine is visibly damaged?
A: Do not use the machine if it is visibly damaged. Contact Pakroman Customer Services for assistance.

Q: How do I ensure proper installation of the machine?
A: Ensure that the main power supply voltage matches the value indicated on the rating plate on the bottom of the machine. Connect the machine to an effectively grounded and properly installed socket with a minimum current rating of 10A only.

Q: How can I stop the coffee-making process?
A: During the process, if you want to stop the operation, press the selected function icon again.

For inquiries or further clarification regarding the specific terms of warranty coverage, please reach out to us at info@pakroman.com.

CONTACT CUSTOMER SERVICE

If you have any questions or problems, contact Customer Service, Monday through Friday 9am-5pm PST(EN). Our service

E-mail: info@pakroman.com

Tel:+302-898-7673

Follow our social media to find more service and promotion :
https://www.pakroman.com/
https://www.facebook.com/pakromanappliance
https://www.instagram.com/pakromanappliance/
www.tiktok.com/@pakromanappliance

WELCOME TO GET SUPPORT FROM US

Monday to Friday
9am-5pm PST(EN)
E-mail: info@pakroman.com
Tel:+(1) 302 898 7673
+(61) 413 928 118

References

• TikTok - Make Your Day
• penny (@pakromanappliance) • Instagram photos and videos
• PAKROMAN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>