Fox ESS EP5 HV Junction Box Installation Guide
- August 24, 2024
- FOX-ESS
Table of Contents
Fox ESS EP5 HV Junction Box
Tools Required
-
6mm Magnetic Phillips Screwdriver(Al)
-
Crimpers(B1)
-
Safety Gloves(‘C1)
-
Safety Glasses(D1)
-
Rubber Mallet(E1)
-
Marker(F1)
-
Hammer Drill @∅,8mm(G1)
-
Spirit Level (H1)
Packing List
-
Boxx1i{A2}1
-
D8 Plastic Expansion Tubex4(B2)
-
MS*10 Screwsx2(C2)
-
Ground ,Cable (1.2m)xl(D2)
-
Power Cable (1 .2m)xl(E2),
-
Quick lnsta Uation Guide x1(F2)
Overview
| No. | Description |
|---|---|
| 1 | BAT+ |
| 2 | BAT’- |
| 3 | pcs+ |
| 4 | pcs- |
| 5 | Ground Terminal |
Preparation
- Please avoid direct sunlight, rain exposure and snow build-up during installation and operation.
- To avoid overheating, always make sure the air flow around the box is not blocked.
- Do not install in places where gas or flammable substances may be present.
- Avoid electromagnetic interference that can compromise the correct operation of electronic equipment.
- The slope of the wall should be within ±5°.
- Reserve more than 300mm of space around the junction box.
Installation Steps
STEP -1:
Choose the place you want to install the junction box. Place the junction box
on the wall a of the 4 holes from fixing blocks.
STEP -2:
Dell holes with hammer drill, make sure the holes are at least 45mm deep, and
then tighten the expansion tubes.
STEP -3:
Insert expansion tubes into, the holes and tighten them. Install the fixing,
blocks with expansion screws.
Wiring Steps
Note: Power cable must be pulled straight from the box for more than 80mm before bending.
STEP-1:
Connect the cable(D2) from the junction box to the ground.
STEP-2:
Connect the power cable(included in the battery package list) from the battery
to the junction box.
STEP-3:
Connect the power cable (E2) form the junction box to PCS
Customers Support
Please scan the QR Code and follow the steps below to download our latest multi-language User Manual/Quick Installation Guide: Scan the QR Code → Select your Language → Choose to download User Manual or Quick Installation Guide → Download