ASUS Q22899 Cpu Water User Guide

ASUS Q22899 Cpu Water

Product Specifications

• Model: ROG RYUJIN III Water Block
• Compatibility: Intel and AMD sockets
• Package Contents:
  • 1 x ROG RYUJIN III Water Block
  • 1 x Intel Backplate
  • 2 x AMD Adapter Brackets
  • 4 x AM5, Intel 115x/1200 Thumbscrew Caps
  • 4 x AM4, Intel 1700 Thumbscrew Caps
  • 4 x Intel 115X/1200/1700 Standoff Screws
  • 2 x 16mm Hard-tube Fitting (G1/4)

IMPORTANT!

• We recommend conducting a comprehensive 24-hour leak test on your custom cooling system to guarantee a secure seal and proper functionality. Due to complexities in the design we strongly discourage disassembly of the ROG RYUJIN III WB; doing so might lead to irreversible mechanical, electrical, or chemical damage, potentially voiding the warranty. Please also note that the cold plate is crafted from copper and should not be paired with aluminum water-cooling equipment.
• We highly recommend using market-proven pre-mixed coolants for better performance and also protecting the entire liquid cooling loop from corrosion.

Package contents

NOTE: The Intel Mounting bracket comes pre-installed on the water block.

Installing the CPU water block

NOTE

• The illustrations in this section are for reference only, but the installation steps remain the same.

Intel

Install the Intel backplate

Install the Intel standoff screws

Install the water block

For Intel 115X/1200

NOTE: We recommend installing the water block so that the ports of the water block face towards you for optimal performance (motherboard positioned with rear IO ports on your left).

AMD

Remove the pre-installed heatsink mount

Install the AMD mounting bracket

Install the water block

For AMD AM5

NOTE

• We recommend installing the water block so that the ports of the water block face towards you for optimal performance (motherboard positioned with rear IO ports on your left).

Connections

Connect the 9-pin USB 2.0 cable

Connect the 4-pin fan cable

Fitting and tubing installation

NOTE:

• The bundled 16mm Hard-tube Fitting and 90° Rotary Adapter Fitting are optional for installation.
• You can find the location of the INLET port and OUTLET port marked on the water block base.
• Install suitable tubing for your specific fitting and secure it by locking the ring to complete the installation of the water block into the water-block loop. Use the appropriate securing method and tubing for fittings other than compression fittings. Ensure to do a leak testing before initiating the system.

Optional

Download control software

• Please visit the product support page at https://rog.asus.com/ to download and install the control software.

Warranty

ASUS Guarantee Information

• ASUS offers a voluntary manufacturer’s Commercial Guarantee.
• ASUS reserves the right to interpret the provisions of the ASUS Commercial Guarantee.
• This ASUS Commercial Guarantee is provided independently and in addition to the statutory Legal Guarantee and in no way affects or limits the rights under the Legal Guarantee.

For all the guarantee information, please visit https://www.asus.com/support.

Product Register

• Log in and register your device for better product support.

SEEKING A SOLUTION?

Scan now for assistance

References

• ROG - Republic of Gamers｜Global | For Those Who Dare
• ROG - Republic of Gamers｜Global | For Those Who Dare
• ASUS Global
• Soporte técnico oficial | ASUS España
• Assistance officielle | ASUS France
• サポート 公式 | ASUS 日本
• Suporte Oficial | ASUS Portugal
• Официальная служба поддержки | ASUS России
• Official Support | ASUS Global
• ASUS Türkiye

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>