VENZ R9052 Smart Floodlight Camera User Guide
- June 5, 2024
- VENZ
Table of Contents
R9052 Smart Floodlight Camera
User Guide
Product Appearance
Power Switch: Hold and press the power switch for 3 seconds to turn on/off the device.
Light Sensor: Used to collect ambient brightness values, when the illumination is lower than 2Lux, light will be on for night vision.
Floodlight: For colorful night vision during the night.
Microphone: For audio talk, pick up voice distance 5 meters.
Indicator Light:
- Red light flash slowly: the device is waiting for Wi-Fi connection.
- Blue light flash slowly: the device is in normal working condition.
- Red and blue light flash alternately: Wi-Fi connection is failed
Infrared Light: For black and white night vision during the night.
Lens: Capture image video.
PIR Detection: When a human body moves in front of the device, the PIR will be triggered, the device will also be woken up and send a alert notification to mobile phone.
SD Card: Install SD card to support local video recording. Support FAT32 format and Max. 128G capacity. (SD card is not included.)
USB Interface: Charge device battery through the USB interface.
Reset: Hold and press the reset button for 5 seconds to reset the device.
Charging Indicator: The indicator light is on when charging battery.
Speaker: Issue system prompts and implement audio talk.
Warning before use
- The effective distance of human body movement detection is 7 meters, please adjust the monitoring angle according to the real condition.
- Please avoid to install this device at the place where temperature changes very often, such as heat source, air output, etc, otherwise it will send alarm notification to App frequently.
- The default PIR sensitivity level is high. You could adjust the sensitivety in device setting page.
- This device doesn’t support “Hot-swappable” SD card. Please install the SD card into camera before power on the device if you wish to use SD card.
Requirement to use
- WOOX Security app
- WLAN-enabled router: 2.4GHz (Separate band), NOT SUPPORTING 5GHz Wi-Fi.
Set up Smart Floodlight Camera to WOOX Security app
1. Download and install the app “WOOX Security” from Apple App Store or Google Play Store on your smartphone.
2. Launch the app “WOOX Security”.
3. Create a new account or log in to your existing account.
4. Tap”+” to add the device.
5. Select the applicable product type from the list of products.
6. Ensure the red indicator light is quick flashing (flashing 2 times per second). If the indicator light isn’t flashing: hold and press the reset button on the bottom of camera until the indicator light starts to flash.
7. Confirm the Wi-Fi network and password.
Note: only 2.4GHz Wi-Fi is supported.
8. The App will prompt you to scan a QR code that needs to be read by the camera in the smart Floodlight camera to initiate pairing, press continue on the App and a QR code should now be generated to pair the product to your account. Position your mobile or tablet device in front of the camera lens and ensure the QR code is in full frame of view, once you hear the sound prompt confirm this on the App, this will commence the final stage of pairing the smart Floodlight camera to your account.
9. The app will now search for the device and register is to your account.
10.Enter the device name.
Note: The device name will also be used by Amazon Alexa and Google Home.
Specification
- Item no.: 2940521
- Power: rechargeable battery, DC 5V
- Battery: 4*18650 2600mAh rechargeable battery
- Resolution: 2304x1296P
- Infrared light: 6 pcs IR light
- Floodlight: 12 pcs white light, 350Im
- Night vision distance: up to 5 meters
- Angle of View: Diagonal 114°
- Audio input: Built in Mic, -38dB microphone
- Audio output: Built in speaker, 801W
- Two-way audio talk: support
- Video format: H.265/H.264
- PIR detection distance: Max. 7 meters
- PIR detection angle: 120° horizontal
- Micro SD card: FAT32 format, Max. 128G (not included)
- Wireless connection: 802.11 b/g/n 2.4GHz WiFi
- Wi-Fi security protocol: WPA-PSK/WPA2-PSK, WPA/WPA2, WEP
- Waterproof level: IP65
- Working temperature: -1 0’C- 55°C
- Working humidity: 0-95%RH, no condensation
- Dimension: 161x104x91mm
Frequently Asked Questions
1. Can I share with family and friends?
Yes, you can share your cameras with family and friends who will have access
to view the camera and control your bulbs, plugs, and other devices. In the
app, click the Family name at the top and click on the “Home Management”
button, and you will be able to give or revoke sharing permissions. In order
to share, the other user should already have downloaded the app and registered
a new account.
2. What’s the Wireless Range?
The range of your home Wi-Fi is heavily dependent on your home router and the
conditions of the room. Check with your router specifications for exact range
data.
3. How many cameras can I control?
WOOX Security app can control an unlimited amount of devices in an unlimited
amount of locations. Your router may have a limit of how many devices can be
connected to one router.
4. My device can’t be connected to network with App
Make sure the device is under the config status (indicator light is flashing
quickly).
Make sure the Wi-Fi is avaliable and the device is not far away from the
router.
Make sure the Wi-Fi password you input is correct.
Make sure the Wi-Fi security protocol is not WPA3.
5. My device shows ofline in my App
Make sure the device is powered on.
Make sure the network is stable and the Wi-Fi name and password not modifed.
If not, add device again.
If the network is normal, but its still offine. Check if there are too many Wi-Fi connections. You can restart your router to check the status of the device.
Caution:
This device complies with Part 15 of the FCC rules and Industry Canada
licenseexempt
RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications or change to this equipment. Such modifications or
change could void the user’s authority to operate the equipment.
This radio transmitter (identify the de vice by certification number or model
number if Category II) has been approved by Industry Canada to operate with
the antenna types listed below with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with
this device.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Tech Support
*You can find much more useful information in the Help Center in the App. You can
also contact us via the Help Center Feedback in the App or tech support email:
[email protected].