AUDAC ARES5A Active Speaker System Instructions
- August 23, 2024
- AUDAC
Table of Contents
AUDAC ARES5A Active Speaker System
Highlights:
- Elegant design to blend in with any environment
- Compatible with EU (80×80 mm) installation materials
- Signal transmission over twisted pair (CAT5E) or better cabling
- Signal transmission insensitive for interference and noise
Product information:
The WP205 is a remote wall mixer that is meant to be used in combination with the ARES5A active speaker system. It converts the signal coming from a stereo line-level audio source (such as a tuner, mobile devices, … ) or balanced microphone to the level corresponding to the differential signal input on the ARES5A(RJ45) making it possible to transfer high-quality audio over long distances between the wall panel and the loudspeaker, by just using inexpensive twisted-pair CAT5e or better cabling. On the front side of the wall panel, there is a 3.5 mm jack stereo line input connection available together with a balanced XLR microphone input, both provided with their own knob which allows the signals to be mixed together. The WP205 is available in 2 colours (White – RAL9003 & Black – RAL9005) and is compatible with most standard EU (80×80 mm) style in-wall boxes for solid and hollow walls. With the Elegant ABS front panel with Acrylic (PMMA) glass finish, it will blend into any environment.
Applications :
- Education
- Retail
- Bars & Restaurants
- Corporate
System specifications:
- Outputs Level +12 dB
- Inputs Wall Panel Type 3.5 mm jack stereo line input connection
- XLR microphone input connection
- Connection 3.5 mm jack input (Stereo line input)
- Female XLR input connector (Microphone input)
- 8-pin terminal block (3.81 mm pitch) output connection
- Control Individual input level control for Mic & Line Phantom power (DIP switch on rear)
- Low-cut (Mic) enable/disable (DIP switch on rear)
- Mono / Stereo (DIP switch on rear)
Product Features:
- Dimensions 80 x 80 mm (W x H) (Remote wall panel)
- Colours Black (RAL9005) (WP205/B)
- White (RAL9003) (WP205/W)
- Front finish Elegant ABS front panel with Acrylic (PMMA) glass finish
- Accessories Optional Surface mount Installation boxes
- WB200 – Surface mount wall box for WP & DWP series
- Flush mount Installation boxes Flush mount box for 45 x 45 mm wall panel –
- Solid wall – WB45S/FS
- Flush mount box for 45 x 45 mm wall panel – Hollow wall – WB45S/FG
Standards & regulations:
- CE LVD Compliant to EN 62368
- EMC Compliant to EN 55032,
- EN55024, EN 61000-3-2/3
- CB Compliant to IEC 62368
- FCC Part 15C
- cTUVus Compliant to IEC 62368+UL62368
- RoHS Compliant
- Reach compliant Compliant
Variants:
- WP205/B – Black version
- WP205/W – White version
Architects’ and Engineers’ Specifications:
The remote wall mixer must be used in combination with the ARES5A active speaker system. It must convert signals coming from a stereo line-level audio source (such as a tuner, mobile devices, …) or balanced microphone to the level corresponding to the differential signal input on the ARES5A. The input level of the Mic or Line signals shall be individual controllable. By providing them with their own knob, the signals can be mixed together. An XLR connector shall be provided as a microphone input, and a 3.5 mm stereo jack connector as a line input.
The wiring between the wall panel and a ARES5A shall be done by using standard CAT5e or better cabling which transfers audio signal to the analogue AUDAC hardware while providing the power supply for the wall panel. The connection shall be made through an 8-pin Terminal Block Connector provided on the backside of the wall panel. The back of the device must contain 6 DIP switches. These DIP switches must enable or disable following functions: Mono- mode, lowcut, 0dB to 12dB switchable (left or right) and Phantom power. The wall panel housing shall be constructed out of ABS with a front panel of glass. De device must have a build-in depth of 52,7mm and must be compatible with most standard EU (80×80 mm) style in-wall boxes for solid and hollow walls. It’s weight shall not exceed 0.072 kg.
Technical drawings:
We reserve the right to change specifications without notice, this is part of our policy to continually improve our products.