iSMA CONTROLLI MAC36NL Series Master Application Controller Instruction Manual
- August 29, 2024
- iSMA CONTROLLI
Table of Contents
Master Application Controller
MAC36NL-series
Protocol Implementation Conformance Statement
BACnet PICS
Protocol implementation conformance statement
1.1 BACnet Protocol Implementation Conformance Statement
Date | 2023-11-24 |
---|---|
Vendor Name | iSMA CONTROLLI S.p.A. |
Product Name | iSMA-B-MAC36NL Series |
Product Model Number
| iSMA-B-MAC36NL iSMA-B-MAC36NL-RS iSMA-B-MAC36NL-M
Firmware Revision| 4.12.2.16
BACnet Protocol Revision| 1.15
Table 1 BACnet Protocol Implementation Conformance Statement
1.2 BACnet Standardized Device Profile
Product Model | Standardized Device Profile |
---|---|
iSMA-B-MAC36NL iSMA-B-MAC36NL-RS iSMA-B-MAC36NL-M | B-BC |
1.3 BACnet Interoperability Building Blocks Supported
Application Service | Designation |
---|
Data Sharing BIBBs-Read Property – The A device is a user of data from device
B.-The “A” Device acts as the user of data (client).| DS-RP-A
Read Property – The B device is a provider of data to device A.-The “B” Device
acts as the provider of the data (server).| DS-RP-B
Read Property Multiple – The A device is a user of data from device B and
requests multiple values at one time.-The “A” Device acts as the user of data
(client).| DS-RPM-A
Read Property Multiple – The B device is a provider of data to device A and
returns multiple values at one time.-The “B” Device acts as the provider of
the data (server)| DS-RPM-B
Write Property – The A device sets a value in device B.-The “A” Device acts as
the user of data (client).| DS-WP-A
Write Property – The B device allows a value to be changed by device A.- The
“B” Device acts as the provider of the data (server)| DS-WP-B
Write Property Multiple – The A device sets multiple values in device B at one
time.-The “A” Device acts as the user of data (client).| DS-WPM-A
Write Property Multiple – The B device allows multiple values to be changed by
device A at one time.-The “B” Device acts as the provider of the data
(server).| DS-WPM-B
COV – The A device is a user of COV data from device B.-The “A” Device acts as
the user of data (client).| DS-COV-A
COV – The B device is a provider of COV data to device A.-The “B” Device acts
as the provider of the data (server).| DS-COV-B
COV-Property – The B device is a provider of COV data of an arbitrary property
of a specified object to device A.-The “B” Device acts as the provider of the
data (server).| DS-COVP-B
COV-Unsubscribed – The B device generates unsubscribed COV notifications.-The
“B” Device acts as the provider of the data (server).| DS-COVU-B
View – The A device retrieves values from a minimum set of objects and
properties and presents them to the user.-The “A” Device acts as the user of
data (client).| DS-V-A
Modify – The A device writes properties that are generally expected to be
adjusted during normal operation of the system.-The “A” Device acts as the
user of data (client).| DS-M-A
Alarm and Event Management BIBBs-Notification – The A device processes
notifications about alarms and other events.-The “A” Device acts as the user
of data (client).| AE-N-A
Notification Internal – Device B generates notifications about alarms and
other events.-The “B” Device acts as the provider of the data (server).|
AE-N-I-B
Notification External – Device B contains an Event Enrolment object that
monitors values in another device. Device B is capable of generating event
notifications for alarm conditions based on value(s) in another device.
Devices conforming to this BIBB must conform to DS-RP-A, AE- N-I-B, and must
support at least 1 Event Enrollment object with an Object Property Reference
property that supports references to properties in objects contained in other
devices. Any device that supports the generation of event notifications that
require operator acknowledgment must support AE-ACK-B.-The “B” Device acts as
the provider of the data (server)| AE-N-E-B
Acknowledgement – Device A acknowledges alarm/event notifications.- The “A”
Device acts as the user of data (client).| AE-ACK-A
Acknowledgement – Device B processes acknowledgments of previously transmitted
alarm/event notifications.-The “B” Device acts as the provider of the data
(server)| AE-ACK-B
Alarm Summary – Device B provides summaries of alarms device A.-The “B” Device
acts as the provider of the data (server).| AE-ASUM-B
Enrollment Summary – Device B provides event enrollments to device A.- The “B”
Device acts as the provider of the data (server).| AE-ESUM-B
Information – Device B provides event information to device A.-The “B” Device
acts as the provider of the data (server).| AE-INFO-B
View Notifications – Device A presents basic alarm and event notifications to
the user.-The “A” Device acts as the user of data (client).| AE-VN-A
View and Modify – Device A displays and modifies limits and related parameters
in event generating objects.-The “A” Device acts as the user of data (client)|
AE-VM-A
Configurable Recipient Lists – Device B supports configuration of its
Recipient List properties.| AE-CRL-B
Scheduling Internal – The B device provides date and time scheduling of the
values of specific properties of specific objects within the device.- The “B”
Device acts as the provider of the data (server)| SCHED-I-B
Scheduling View and Modify – The A device manipulates schedules and calendars
on the B device.-The “A” Device acts as the user of data (client).| SCHED-VM-A
Viewing and Modifying Trends Internal – The B device collects the trend log
data records in an internal buffer.-The “B” Device acts as the provider of the
data (server)| T-VMT-I-B
Viewing and Modifying Trends External – The B device is capable of trending
properties of objects contained in other devices.-The “B” Device acts as the
provider of the data (server).| T-VMT-E-B
Automated Trend Retrieval – The A device responds to a notification that a
trend log is ready with new data and acquires the new data from the log.- The
“A” Device acts as the user of data (client).| T-ATR-A
Automated Trend Retrieval – The B device notifies the A device that a trending
buffer has acquired a predetermined number of data samples| T-ATR-B
using the BUFFER_READY event algorithm either intrinsically in the Trend Log
object or algorithmically using an Event Enrollment object.- The “B” Device
acts as the provider of the data (server).|
Trending – View – The A device displays trend data from the B device.- The “A”
Device acts as the user of data (client).| T-V-A
Dynamic Device Binding – The A device seeks information about device
attributes of other devices and interprets device announcements.-The “A”
Device acts as the user of data (client).|
Dynamic Device Binding – The A device seeks information about device
attributes of other devices and interprets device announcements.-The “A”
Device acts as the user of data (client).| DM-DDB-A
Dynamic Device Binding – The B device provides information about its device
attributes and responds to requests to identify itself.-The “B” Device acts as
the provider of the data (server)| DM-DDB-B
Dynamic Object Binding – The A device seeks address information about
objects.-The “A” Device acts as the user of data (client).| DM-DOB-A
Dynamic Object Binding – The B device provides address information about its
objects upon request.-The “B” Device acts as the provider of the data
(server)| DM-DOB-B
Device Communication Control – The B device responds to communication control
exercised by the A device.-The “B” Device acts as the provider of the data
(server)| DM-DCC-B
Time Synchronization – The A device provides time synchronization to B
devices. The time parameter contained in the service request contains the date
and time as determined by the clock in the device issuing the service request.
Normally this will be “local time,” i.e., the time in the local time zone
corrected for daylight savings time as appropriate.-The “A” Device acts as the
user of data (client).| DM-TS-A
Time Synchronization – The B device interprets time synchronization messages
from the A device.-The “B” Device acts as the provider of the data (server).|
DM-TS-B
UTC Time Synchronization – The A device provides time synchronization to B
devices. The time parameter contained in the service request contains
“Coordinated Universal Time” (UTC). For all practical purposes, UTC is
synonymous with Greenwich Mean Time, the time at the zero or Greenwich
meridian.-The “A” Device acts as the user of data (client)| DM-UTC-A
UTC Time Synchronization – The B device interprets time synchronization
messages from the A device.-The “B” Device acts as the provider of the data
(server)| DM-UTC-B
Reinitialize Device – The B device performs reinitialization requests from the
A device. The optional password field shall be supported.-The “B” Device acts
as the provider of the data (server).| DM-RD-B
Backup And Restore – The B device provides its configuration file to the A
device and allows the A device to write this file to recover its configuration
in the event of a failure.-The “B” Device acts as the provider of the data
(server).| DM-BR-B
Restart – The B device informs the A device(s) each time it restarts.-The “B”
Device acts as the provider of the data (server).| DM-R-B
List Manipulation – Many BACnet object types have properties that are lists of
a particular datatype. The A device can add and remove list elements in
properties of objects in the B device.-The “A” Device acts as the user of data
(client).| DM-LM-A
List Manipulation – The B device responds to requests to add or remove list
elements.-The “B” Device acts as the provider of the data (server).| DM-LM-B
Object Creation and Deletion – The B device creates and deletes object
instances based on requests from the A device. The object types whose dynamic
creation and deletion is supported shall be enumerated in the Standard Object
Types Supported section of device B’s PICS.-The “B” Device acts as the
provider of the data (server)| DM-OCD-B
Device Management BIBBs-Automatic Network Mapping – The A device finds all
devices currently connected to the BACnet internetwork.-The “A” Device acts as
the user of data (client).| DM-ANM-A
Automatic Device Mapping – The A device is capable of retrieving and
presenting a list of all objects contained in any BACnet device.-The “A”
Device acts as the user of data (client)| DM-ADM-A
Automatic Time Synchronization – The A device provides periodic time
synchronization to B devices. The time parameter contained in the service
request contains the date and time as determined by the clock in the device
issuing the service request. Normally this will be “local time,” i.e., the
time in the local time zone corrected for daylight savings time as
appropriate.- The “A” Device acts as the user of data (client)| DM-ATS-A
Manual Time Synchronization – The A device provides time synchronization to B
devices on request by the operator. The time parameter contained in the
service request contains the date and time as determined by the clock in the
device issuing the service request.
Normally this will be “local time,” i.e., the time in the local time zone corrected for daylight savings time as appropriate.-The “A” Device acts as the user of data (client).
| DM-MTS-A
Router Configuration – The B device responds to router management commands and
must meet the requirements for BACnet Routers as stated in Clause 6.-The “B”
Device acts as the provider of the data (server)| NM-RC-B
Embedded Objects- The B device provides access to data and functionality in
non-BACnet devices. The B device includes the data and functionality of the
other devices through BACnet objects and services within the B device| GW-EO-B
Table 3 Building Blocks Supported
1.4 Data Link Layer Option
- Master-Slave/Token-Passing (MS/TP) master (Clause 9), baud rates: 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200
- MS/TP slave (Clause 9), baud rates: 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200
- BACnet Internet Protocol (IP) (Annex J)
- BACnet IP (Annex J), Foreign Device
1.5 Character Sets Supported
ISO 10646 (UTF-8)
1.6 Standard Object types supported
- Calendar, Event-Enrollment, Notification-Class, Schedule, and Trend-Log Object
- types can be dynamically created and deleted
- No general range restrictions exist; however, certain specific applications may have
- specific range restrictions.
- All potentially available properties are listed for each object type.
- Optional properties are listed in italics. Not all instances support all optional
- properties.
- Writable properties are listed in bold. Any range limitations are expressed in
- parentheses following the property name
iSMA CONTROLLI S.p.A.
Genova, Italy
www.ismacontrolli.com
Documents / Resources
| iSMA
CONTROLLI MAC36NL Series Master Application
Controller
[pdf] Instruction Manual
MAC36NL Series, MAC36NL Series Master Application Controller, Master
Application Controller, Application Controller, Controller
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>