HALCYON P448 1PNL LED High Bays Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON P448 1PNL LED High Bays
INSTALLATION INSTRUCTIONS
- Product Name : LED High Bays
- Model #: P448 1PNL P449 1PNL P450 1PNL P450 1P65KL
- Description: P448 1PNL 100 Watt LED, Non-dimmable, IP65, 4000K
- P449 1PNL 150 Watt LED, Non-dimmable, IP65, 4000K
- P450 1PNL 200 Watt LED, Non-dimmable, IP65, 4000K
- P450 1P65KL 200 Watt LED, Non-dimmable, IP65, 6500K
- Rated Voltage: 220-240V-, 50/60Hz
- Turn power off.
- Install the suspension kit.
- Plug in the power cord.
- Switch luminaire on to test luminaire functions correctly and is electrically safe.
Installation note: Do not install on the same circuits as Metal halide,
Fluorescent and other “Low power factor” devices.
When installed on the same circuit it can cause flickering and/or premature
failure of the “high power factor” electronic drivers. The harmonic distortion
from low power factor devices alters the Waveform of the AC supply which can
cause componentry in high power factor electronic drivers to resonate, run
over temperature and fail after prolonged exposure.
WARNING: FIRE RIsK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED CLOSE TO CURTAINS OR OTHER COMBUSTIBLE MATERIALS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>