SPEAKA PROFESSIONAL SP-HDE-300 HDMI Extender Extension Via Network Cable Instruction Manual

: August 22, 2024
: Speaka PROFESSIONAL

Table of Contents

SP-HDE-300 HDMI Extender Extension Via Network Cable
Operating Instructions for download
Intended use
Delivery content
Explanation of symbols
Safety instructions
Operating elements
Connection diagram
Care and cleaning
Disposal
Technical data
Documents / Resources

Operating Instructions
HDMI extender (extension) via network cable 60 m
Item No. 2348253

SP-HDE-300 HDMI Extender Extension Via Network Cable

http://www.conrad.com/downloads

Operating Instructions for download

Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.

Intended use

This HDMI extender transmits 4k@60 Hz or 1080p@60 Hz video over a single Cat6 Ethernet cable up to a distance of 60 m. The extender supports Power over Cable (PoC), a bi-directional wide-band IR extension and a Local Loop Output.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes other than those described, the product may be damaged. In addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and product names are trademarks of their respective owners. All rights reserved. HDMI is a registered trademark of HDMI Licensing L.L.C.

Delivery content

Transmitter
Receiver
Power adapter
8 x screws
2x Phoenix connectors for RS232 cable termination
4x L-shaped feet
2x IR blasters
2x IR receivers
Operating instructions

Explanation of symbols

The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
a) General information

The device is not a toy. Keep it out of the reach of children and pets.
Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, steam, and solvents.
Do not place the product under any mechanical stress.
If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
Please handle the product carefully. Jolts, impacts, or a fall, even from a low height, can cause damage to the product.
Consult an expert when in doubt about the operation, safety, or connection of the appliance.
Maintenance, modifications, and repairs must only be completed by a technician or an authorised repair centre.
If you have questions that remain unanswered by these operating instructions, contact our technical support service or other technical personnel.

Caution:

To avoid damaging the components, do not attempt to open or repair the product without professional guidance.
The operating range may be affected by environmental factors and nearby sources of interference.
Proper use helps to prolong the lifespan of the product.

b) Connected devices
Also observe the safety and operating instructions of any other devices which are connected to the product.

Operating elements

Loop Out
Connect to a local HDMI display device, such as a TV or projector.
HDMI In
Connect to an HDMI source device, such as a DVD player or PS4.
CAT Out
Connect to another receiver over a network cable (CAT.6, 6a, 7).
HDMI Out
Connect to a Remote HDMI display device, such as a TV or projector.
IR In
Connect to a wideband IR Receiver cable. The IR signal will be sent to the IR Out port of another unit.
IR Out
Connect to a wideband IR Blaster cable. The IR signal will be sent to the IR Out port of another extender.
DC/12 V
Plug the DC 12 V power supply into the extender and connect the adapter to an AC outlet. The extender supports PoC, allowing either the sender or receiver to be powered by a 12 V power adapter.
Power LED
This lights up when the extender is powered on.
Link LED
This lights up when the Loop Out or HDMI Out connection has been established.
CAT
Connect a sender or receiver over a network cable (CAT.6, 6a, 7)
RS232
Pass through the RS232 signal.

Connection diagram

Care and cleaning

Disconnect the product from the mains before cleaning.
Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as they can cause damage to the housing and functioning of the product.
Clean the product with a dry, fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

Input voltage/current………………… 100-240 V AC, 50/60 Hz, Max. 0.8 A
Output voltage/current ……………… DC 12 V, 2 A, 24 W
HDMI compliance ……………………. HDMI 2.0
HDCP compliance …………………… HDCP 2.2/HDCP 1.4
Extender connectors………………… RJ45 input/output, HDMI port, IR supporting 20 K- 60 KHz
Supported features ………………….. HDR (High Dynamic Range), PoC (Power over Cable), Bi-directional IR, Local Loop Output and cascading, EDID mixing, compressed audio, uncompressed audio
Status display type ………………….. LED
Colour depth…………………………… 12-bit
Supported video formats ………….. 4K2K (60 Hz), 4K2K (30 Hz), 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Supported audio formats ………….. LPCM, DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD)
Transfer rate …………………………… Max. 18 Gbps
Extender range ……………………….. Max. 60 m
Operating/storage conditions…….. 0 °C to 40 °C (operating)
…………………………. -20 °C to +60 °C (storage)
…………………………. 5-90 % relative humidity (non-condensing)
Dimensions …………………………….. 118 x 76 x 25 mm
Weight …………………………………… 403 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the time of printing.

Copyright 2024 by Conrad Electronic SE.
*2348253_v3_0124_02_dm_mh4L(1)

Documents / Resources

| SPEAKA PROFESSIONAL SP-HDE-300 HDMI Extender Extension Via Network Cable [pdf] Instruction Manual
SP-HDE-300, 2348253, SP-HDE-300 HDMI Extender Extension Via Network Cable, SP- HDE-300, HDMI Extender Extension Via Network Cable, Extension Via Network Cable, Via Network Cable, Network Cable, Cable
---|---