Speaka PROFESSIONAL SP-TVS-150 Universal Swivel Tabletop TV Stand Instruction Manual
- June 4, 2024
- Speaka PROFESSIONAL
Table of Contents
Speaka PROFESSIONAL SP-TVS-150 Universal Swivel Tabletop TV Stand
Intended use
The product is a TV/monitor mount. Use the product to mount a TV/monitor, then place it on a suitable surface. The product is intended for indoor use only. Do not use it outdoors. If you use the product for purposes other than those described, the product may be dam-aged. Improper use can result in hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read this document and the accompanying operating instructions carefully and especially observe the safety information. Store them in a safe place. Make this product available to third parties only together with the safety instructions and any accompanying instructions. All company names and product names are trademarks of their respective owners. All rights reserved.
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Safety instructions
Read this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liab-ility for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Installation
-
Verify that the delivery content is complete before assembling the product. Do not as-semble the product if the delivery content is not complete.
-
Before beginning the installation process, check whether there are appropriate mounting options for a mount on the back of your monitor.
-
Observe the maximum permissible monitor weight in the product documentation. Over-loading can cause the stand/holder to collapse and lead to injury or property damage.
-
Selecting an unsuitable installation location can lead to personal or material damage!
-
Proceed with care when assembling and installing the product! The product has some sharp edges. There is a risk of injury!
-
Carry out only the work on the mount that is necessary to install it (or to change its loca-tion). Never dismantle the mount and never attempt to convert it or to repair it in any way. Some mounts contain highly pre-stressed metal springs. Dismantling such a mount in the wrong way could cause you severe injury!
-
It is usually necessary to remove the monitor’s base before mounting the monitor. Please consult the operating instructions for your monitor.
-
Lay the monitor flat with its screen side down onto a soft, clean pad or cloth, so that there is no pressure on the screen and the screen does not get scratched. Protect valu-able furniture surfaces during installation by using a suitable pad or cloth.
-
When fixing the mount to the back of the monitor, make certain you use the correct screws. Not only must these be of the correct thread type for the monitor, but they must also not be too long; otherwise, they will damage the monitor.
-
The screws must not be too short, however, since otherwise the connection will not be secure.
The screws must be screwed into the threaded fixture holes on the monitor with at least 5 full 360° turns. -
The correct screws are usually supplied together with the mount or with the monitor. Occasionally, however (depending on the monitor type), other screws are required; these can be purchased from specialist retailers.
-
Do not use any force when tightening the screws; otherwise, the monitor may be des-troyed, leading to loss of warranty/guarantee!
-
If you have any doubt about the correct length of the screws required, we recommend that you contact the monitor manufacturer or an appropriate specialist.
-
Depending on the size and design of the monitor and mount concerned, it is sensible for a second person to help with the installation. This person can hold the monitor still, for example, while you are attaching the monitor to the mount.
-
Apply your full concentration when carrying out the installation, because if the monitor and/or mount were to fall, this could cause expensive damage to the equipment and there is the potential danger of personal injury!
-
Lay all the monitor’s cables in such a way that they do not get jammed or kinked in the mount.
-
Check all the screw fittings from time to time. Adjusting the position of the monitor and/or the mount and moving them can sometimes cause the screws to become loose over time.
Placement
Select a stable and dry location that can withstand the weight of the stand including the monitor. Unstable and slippery locations can cause the stand to fall down and damage the monitor or injure people.
Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and pro-tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-eration can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
Cleaning and care
Important
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Clean the product with a dry, fibre-free cloth.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com)). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
2464455_V1_1221_jh_ss_en I1/O1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>