METAVISIO TEO8 Tablet PC Owner’s Manual

METAVISIO TEO8 Tablet PC

Package contents

• Product name: Tablet PC
• Product Model numbers: TEO8
• Power adapter (100V-240V)XTM
• Quick guide

Technical specifications

• Processor (CPU): MTK8766
• Operating system: Android 13.0
• RAM/Internal storage: 4/64GB
• Screen size: 8” Display: IPS display (800*1280; 16:9)
• Camera: Front: 2MP+5.0MP
• Interfaces: 1XUSB, 1x SIM Card audio out/MIC in (3.5mm), Network: WIFI 802.11 a/b/g/n/ac:2.4 GHz/5 GHz, Bluetooth 5.0
• Card slot: micro SD (HC/XC) up to 128GB, More::G-Sensor, dual-microphone, stereo speaker
• Size: ca.185×180 x9.9mm
• Weight: approx320 g
• Material/Color: plastic
• Battery: Li-polymer 5100mah (charging via USB)

A brief introduction to tablet product

• Diagram for tablet complete machine
• Introduction to accessories of tablet

Packing list
The following articles are included in your packing box of the tablet

• The complete machine or tablet
• Power adaptor
• USB connecting cable
• User

Description of key function

Homepage interface
All application programs on the machine will be displayed on the main menu screen. You may use the application program shortcut and user-de ned model to set the wallpaper of Your homepage interface.

Access to the application program
How to visit the application program of the tablet.

1. Please click the application program menu, As shown in FIGURE2-2.
2. Select the application program you want to visit.
3. If you want to exit the program interface, press the return key to the last interface, or press the homepage key to return the homepage interface directly.

Character input

Use screen keyboard
When you start the program or select the test edit box needing to input characters or numbers,  the screen keyboard will show. The following input methods are provided for the keyboard to select.

1. Android TM keyboard
2. Input method of a third party (user can install them by himself)

Select the input method you need to us
According to presetting,  the tablet will display an Android keyboard.

when you want to input characters.

1. Press the menu key in the homepage interface, then click the setting
2. Click the language and keyboard.
3. All of the input methods already installed on your tablet will be listed in the Text setting region.
4. Select the input method you want.

Use and switch input method

1. In the character input interface, click the keyboard icon under the Status bar, until popping up of editing text menu.
2. Select the input method you need.

Connection Establishment

WIFI connection
Your tablet can be connected onto WI-FI network to connect to the Operation.

1. on the homepage interface, click and select the menu key and pop up the menu setting;
2. Click and select the Internet and network settings;
3. Click WI-FI and open WI-FI switch
4. After opening the WI-FI, the searched WI-FI network can be scanned automatically From the equipment in the windows on the right
5. Select the WI-FI network required to be connected, if the password is added, pop up the password input windows and input the corresponding password.
6. Click the connection.

Bluetooth Connection
Application of Bluetooth(Figure 3-2)

1. Setting procedure of entering into Bluetooth: set->Bluetooth set, Open the bluetooth equipment
2. Name of equipment: you can randomly change the name of Bluetooth for your tablet by pressing the menu key.
3. Detectability: open this function by clicking the place for the name of Bluetooth. This indicates that your tablet Bluetooth can be searched by other Bluetooth equipment, the default time for this opening is 120 seconds.
4. Scan and look for equipment: you can detect the equipment desired to be connected by utilizing this function.
5. Bluetooth After employing the scan to look for the equipment, all Bluetooth equipment searched by your tablet can be displayed under this function.

Call Function

1. Insert the SIM card under the power-off state.
2. Boot up the device, after when the mark of the network provider shows in the notification bar, you can dial or answer the phone.
3. The network signal strength will be displayed in the bottom right corner of the information bar.
4. Refer to the information query and mobile date settings of the network provider(SIM Card), please follow “settings-SIM card management to set up.

3G 4G connection
Your tablet can be connected to a 4G network to connect to the operation;

1. On the homepage interface, click and select the menu key and pop up the menu setting;
2. Click and select the system setting
3. Click date usage.› open mobile data (Figure 3-4);
4. After opening mobile data, you can browse the web.

Troubleshooting

Slow initial boot for tablet
After the system upgrade of the tablet initial boot needs to installation of the pre-installed software applications, for about 2-3 minutes.  It runs faster.

The tablet can not be connected to WIFI
Ensure that the wireless router providing the network services works properly. Ensure the tablet and the wireless router are kept at a certain distance, and between which no wall or other obstacles exist. Ensure the username and password are correct.

Tablet feels hot
When multiple applications are running at the same time, or the screen is adjusted to the brightest, or it is recharging, this situation is normal.

Unable to create e-mail or registration applications
Ensure your network is properly connected to the internet. Ensure the e-mail is set up correctly. Ensure your system time and local time are consistent

The system is disordered and does not work properly
Installation of some third-party applications may lead to system failure and you can press the reset button to reset the system.

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

This device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.

1. Use carefully the earphones excessive sound pressure from earphones and headphones can cause hearing loss.
   CAUTION: RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

2. The product shall only be connected to a USB interface of version USB 2.0

3. An adapter shall be installed near the equipment and shall be easily accessible.

4. The plug considered as disconnect device of the adapter

5. The device complies with RF specifications when the device is used at 0mm from your body

6. Leave the product for recycling at the designated station,e.g, the local authority’s recycling station.

This product can used across EU member states except operations in the 5.15-5.25GHZ band are restricted to indoor usage only for the following.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information
This device meets the government’s requirements for FCC exposure limits set forth for an uncontrolled environment. This device was tested for typical body-worn operations with the back of the TABLET PC kept 0 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0 mm separation distance between the user’s body and the back of the TABLET PC. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

References

• minutes.it

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>